On 2010/11/06 17:12 (GMT+0200) Stan Goodman composed:
1-Boot to BIOS setup 2-Note which HD is selected as first boot priority
Seagate (11.3)
3-Exit BIOS setup with save& power down 4-Disconnect SATA cable and/or power cable from Hitachi 5-Boot to BIOS setup 6-Note if first boot priority has changed 7-Use DFSee to give the Seagate a LVM disk name that includes the word Seagate 8-Use DFSee to 'newmbr 1' (or same thing via its menu) 9-Try to boot Seagate
Boot Manager now comes up, and a v11.3 herald screen, after which
No Grub menu? This implies first boot after initial installation never previously succeeded. First "boot" by default isn't a complete reboot. By default the installer uses kexec to re-init after replacing the installation kernel in memory with the installed kernel and initrd.
there is a maintenance screen, showing actions during the boot process.
These are normal boot messages, normally hidden by the "quiet" the installer puts on the Grub menu's kernel lines. By removing quiet and/or putting splash=verbose on those kernel lines you get to watch boot progress instead of wondering what if anything is happening while trying to get the OS started.
The first line is:
Trying manual resume from /dev/disk/by-id/ata-<Seagate#>-part5
The installer presumes you'll be wanting to resume from sleep by putting resume=<swap-partition> on the kernel line. I always remove this from desktop installations, as I never want a multiboot system to presume I want to start wherever I left off. . . .
/dev/sda6: UNEXPECTED INCONSISTENCY: Run fsck MANUALLY (i.e. without -a or -p optiona) fsck failed. Mounting root device read-only
(Here the line "activating swap-devices in /etc/fstab" failed)
fsck failed. Please repair manually and repeat. The root file system is currently read only To remount it read-write do # mount -n -o remount, rw/
I've never figured out how to manually do what couldn't be done automatically upon encountering this series of messages. I fix it by booting something else and doing fsck from that, and if that fails, reformatting and restoring from backup, or reinstalling fresh. Considering what has happened to your system over recent weeks, likely fresh installation of 11.3 will be the best course of action.
ATTENTION Only CONTROL-D will reboot the system in this maintenance mode. shutdown or reboot will not work.
It asked for root's pw, and I gave it, then a prompt appeared in red:
repair file system #
This is a root prompt, but you can't do much from it while / remains mounted ro due to filesystem inconsistency.
I am not clear whether it wants me now to do fsck or to remount. If the former, I assume it is on the installation DVD.
fsck is available from that prompt, but understanding how to get it to do manually what it couldn't figure out how to do automatically has always escaped me. Booting something else in order to fsck is what I always do from this point.
10-Reconnect Hitachi 11-Boot to BIOS setup 12-Ensure Seagate is first HD priority
It is.
13-Exit BIOS setup with save, power off 14-Use DFSee to give Hitachi a LVM disk name that includes the word Hitachi 15-Use DFSee to newmbr the Hitachi 16-Note which disk is #1& which is #2 according to DFSee
In "MBR and EBR operations, both are Disk2.
I don't see how this is possible unless a step is being missed by one of us. Before selecting to perform MBR/EBR area operations from the Mode=FDISK menu you should first select the disk to be operated upon from the File -> Open object to work with menu, or exiting the menu, entering disk nr on the command line, then going back to the Mode=FDISK menu. If it still always refers to disk 2, maybe this is a question to refer to Jan. Simply starting DFSee you should see a table of partitioning, with each HD having a heading line that includes: ---<disk #></dev/sdX>--------<LVM disk label>--- The first should have *Seagate*, the second *Hitachi*.
17-Exit DFSee 18-Restart DFSee with new logname DFSWORK2.TXT
Having done nothing in between?
Right, to generate a DFSee log with nothing in it other than the information it displays upon startup.
19-Exit DFSee
Nothing was recorded.
Are you sure? Did you hit ESC at startup instead of typing in DFSWORK2.TXT and hitting <enter>? Did you start DFSee from floppy or CD and have no writable space available to save the log?
20-Upload DFSWORK2.TXT to ftp://hashkedim.com/pub/ 21-Make hashkedim.com/pub available via HTTP (cannot right click links to open in new tabs from FTP list in Firefox 4 or SeaMonkey 2.1)
The FTP facility is not available, because I have not had time to deao with it since the hosting service disabled it after telling me that it had been invaded. Is there somewhere else I can upload for the List (when I have something to upload)?
http://susepaste.org/ & http://pastebin.com/ are two of many places that can serve this purpose. See also http://en.wikipedia.org/wiki/Pastebin
22-Boot whichever HD brings up BM
See above. I can get as far as the<repair file system #> prompt. If you intend that I boot from GRUB, please tell me how to get to a GRUB prompt.
What happened above was a Grub menu bypass that is normal on first boot following installation. If you were to try again, I would expect you would get a Grub menu or Grub prompt before a root repair # prompt.
23-Try to get a Grub prompt or menu 24-report back
This has been some progress. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org