On Tuesday 03 June 2008 15:33:50, Gabriel Stein wrote:
Hey Daniel,
And your config to dns and gateway? Are ok?
Please print here the results of 2 commands:
"cat /etc/resolv.conf"
daniel@dhcppc0:~> cat /etc/resolv.conf ### BEGIN INFO # # Modified_by: NetworkManager # Process: /usr/bin/NetworkManager # Process_id: 11276 # ### END INFO nameserver 80.58.61.250 nameserver 80.58.61.254
and AFTER
"route -n"
dhcppc0:~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 (this now, I am connected by cable, so there's eth0 while WLAN would be eth1...) I found a KNetworkManager-Log in /var/log. Just now I tried to activate the WLAN and thats the result in that log: Jun 3 16:26:02 baer NetworkManager: <debug> [1212503162.016064] nm_device_802_11_wireless_get_activation_ap(): Forcing AP 'WLAN_A0' Jun 3 16:26:02 baer NetworkManager: <info> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / WLAN_A0 Jun 3 16:26:02 baer NetworkManager: <info> Deactivating device eth1. Jun 3 16:26:02 baer NetworkManager: <info> Device eth1 activation scheduled... Jun 3 16:26:02 baer NetworkManager: <info> Deactivating device eth0. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) started... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1/wireless): access point 'WLAN_A0' is encrypted, but NO valid key exists. New key needed. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) New wireless user key requested for network 'WLAN_A0'. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) New wireless user key for network 'WLAN_A0' received. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 3 16:26:03 baer NetworkManager: <info> Activation (eth1/wireless): access point 'WLAN_A0' is encrypted, and a key exists. No new key needed. Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant ' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'AP_SCAN 1' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'ADD_NETWORK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was '0' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 ssid 574c414e5f4130' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 scan_ssid 1' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> SUP: sending command 'ENABLE_NETWORK 0' Jun 3 16:26:04 baer NetworkManager: <info> SUP: response was 'OK' Jun 3 16:26:04 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 3 16:26:27 baer NetworkManager: <debug> [1212503187.573753] nm_device_802_11_wireless_get_activation_ap(): Forcing AP 'WLAN_A0' Jun 3 16:26:27 baer NetworkManager: <info> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / WLAN_A0 Jun 3 16:26:27 baer NetworkManager: <info> Deactivating device eth1. Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1): cancelling... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) cancellation handler scheduled... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1): waiting for device to cancel activation. Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) cancellation handled. Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1): cancelled. Jun 3 16:26:27 baer NetworkManager: <info> Device eth1 activation scheduled... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) started... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 3 16:26:27 baer NetworkManager: <info> Activation (eth1/wireless): access point 'WLAN_A0' is encrypted, and a key exists. No new key needed. Jun 3 16:26:30 baer NetworkManager: <info> Error opening supplicant global control interface. Jun 3 16:26:30 baer NetworkManager: <WARN> real_act_stage2_config(): Activation (eth1/wireless): couldn't connect to the supplicant. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth1) failure scheduled... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth1) failed for access point (WLAN_A0) Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth1) failed. Jun 3 16:26:30 baer NetworkManager: <info> Deactivating device eth1. Jun 3 16:26:30 baer NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. Jun 3 16:26:30 baer NetworkManager: <info> Will activate connection 'eth0'. Jun 3 16:26:30 baer NetworkManager: <info> Device eth0 activation scheduled... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) started... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Jun 3 16:26:30 baer NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Jun 3 16:26:31 baer NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Jun 3 16:26:31 baer NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Jun 3 16:26:31 baer NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 Jun 3 16:26:31 baer NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth0 So there was an error and then it fell back to the cable on eth0. That's all I can see from this log. Maybe you see more? regards Daniel -- Daniel Bauer photographer Basel Barcelona professional photography: http://www.daniel-bauer.com erotic art photos: http://www.bauer-nudes.com Madagascar special: http://www.fotograf-basel.ch/madagascar/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org