Well, 6.3 didn't have great support for ATA66 drives. Have you tried the new 2.2.16 kernel that is on the FTP site. This might work better for you. * Lawrence Sayre (lsayre@stratos.net) [000909 18:36]: -->I did a complete re-install of SuSE 6.3 onto a new Seagate 30.6 GB HD. -->I installed a 10 MB /boot partition on hda1, then installed the balance -->of SuSE above the 1024 cylinder limit. --> -->I had heard that if /boot was benieth the 1024 cylinder limit everything -->would be OK. It boots from a disk and runs great, but I can't get it to -->boot off the HD. The new HD is a UDMA 66 type. --> -->Lawrence Sayre --> -->--------------------------------------------- -->"Man's mind is his basic tool of survival!" -->(a quote from the famous 'John Galt' speech -->in the equally famous book "Atlas Shrugged") -->--------------------------------------------- --> -->-- -->To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com -->For additional commands send e-mail to suse-linux-e-help@suse.com -->Also check the FAQ at http://www.suse.com/support/faq --> -- Cheers, Ben Rosenberg mailto:ben@whack.org ------------------------- Warning to the Human Race: Objects in mirror are dumber than they appear. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq