Rajko M. wrote:
On Friday 13 March 2009 08:32:54 am mukul wrote:
Mukul Singh wrote:
Rajko M. wrote:
On Thursday 12 March 2009 08:36:47 pm Mukul Singh wrote: ...
That has not been my experience. I removed pulse except that library and the sound won't work on my laptop unless I do rcalsasound restart. BTW, I have tried VLC as suggested by another person and that too did not work.
Regards Mukul,
1) Check is PulseAudio enabled. Use Yast sound module: YaST > Sound > button Other > PulseAudio configuration It should say that PulseAudio is not installed. I did the check and it does say that PulseAudio is not installed.
2) Remove you sound card from YaST sound, close YaST sound, then open again. This should find and reconfigure your card for current sound system. Hi,
I have done this and the sound works (for mplayer, vlc etc., no sound for videos on youtube through Firefox or Opera) until I reboot the machine. Once I reboot, the things go back to what they were before I did step 2.
Regards
So a word or two about your hardware could be next step.
lspci uname -a
But it would be also good to open new thread, with question, and subject like above. General discussion about operating system will not solve your audio problem, and it is hard to find your answers in the pile of junk that such discussions generate.
Hi, I followed instructions given on : http://en.opensuse.org/SDB:AudioTroubleshooting#Symptom and http://en.opensuse.org/SDB:Intel-HDA_sound_problems and the current status is that I get sound in mplayer, even after I log back in. The current problem is that the sound is very low, even though in KMix I have selected the appropriate channel and set the volume to 100%. HW info is as follows: lspci : 00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1) 00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1) 00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2) 00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1) 00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1) 00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1) 00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1) 00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1) 00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) 00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) 00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) 00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1) 00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1) 00:0b.0 SATA controller: nVidia Corporation MCP79 AHCI Controller (rev b1) 00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) 00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) 00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) 00:17.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) 00:18.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) 02:00.0 VGA compatible controller: nVidia Corporation GeForce 9200M G (rev b1) 06:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) uname -a : Linux linux-95f9 2.6.27.19-3.2-default #1 SMP 2009-02-25 15:40:44 +0100 i686 i686 i386 GNU/Linux Regards -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org