![](https://seccdn.libravatar.org/avatar/7891b1b1a5767f4b9ac1cc0723cebdac.jpg?s=120&d=mm&r=g)
With Leap15 switching to chrony instead of ntp, I thought I would play around with it, see if it is really up to it. Just playing, I have no intention of switching. With ntp, I use multicast ff05::101 which is not supported in chrony, so I figured I could maybe add a link-local address (which is what ntp gets via ff05::101). I tried these, but none of them work: server fe80::208:2ff:fe58:7fac iburst server [fe80::208:2ff:fe58:7fac] iburst server fe80::208:2ff:fe58:7fac%eth0 iburst server [fe80::208:2ff:fe58:7fac%eth0] iburst chrony doesn't compain about any of them, but doesn't synchronise either. Just nagging - the default chrony config uses 0.opensuse.pool.ntp.org which doesn't have a single ipv6 address. Only 2.opensuse.pool.ntp.org seems to have any. Maybe it would be sensible to let chrony use pools 0-3 by default, just as the default ntp config does. -- Per Jessen, Zürich (2.2°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org