![](https://seccdn.libravatar.org/avatar/36e051ccd5c147f9e9d619fe330bd9f5.jpg?s=120&d=mm&r=g)
If you have the problem I think you have, a possible workaround would be to
open Konq, click Settings->Settings...->Appearance, then choose either
iso8859-1 or iso8859-15 (or whatver your preferred charset) then click
Enforce default charset encoding at the bottom of the dialog. Try to read
the page again. If you don't have the problem I think you have, never mind.
John
----- Original Message -----
From: "Pat Colbeck"
Hi
I am using Konqueror from KDE 2.2.1 on SuSE 7.3 and mainly its great. However I do a lot of work with Cisco kit and it has major problems with their web site. If you load a big html document as you read down it the fonts get bigger and bigger and bigger until there is only maybe one or two words line (at 1024x768 !!!). The following url demonstrates the problem, you will have to page down to at least a quarter of the way through it before it gets really bad. Does anyone else get the same thing ?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_1330 8.htm
Pat -- ----------------------------------- Pat Colbeck