![](https://seccdn.libravatar.org/avatar/6a5533048d19b01710c8acbb091bf268.jpg?s=120&d=mm&r=g)
Michael Kershaw wrote:
Jan,
In your ifcfg-bond0, instead of listing the interface as the bonding_slave's, have you tried to tell it the pci info instead like so:
BONDING_SLAVE0='bus-pci-0000:04:02.0' BONDING_SLAVE1='bus-pci-0000:04:02.1'
Here's my complete ifcfg-bond0:
BOOTPROTO='static' BROADCAST='192.168.148.31' IPADDR='192.168.148.30' MTU='1500' NETMASK='255.255.255.224' NETWORK='192.168.148.0' REMOTE_IPADDR='' STARTMODE='onboot' BONDING_MASTER='yes' BONDING_MODULE_OPTS='mode=active-backup miimon=100' BONDING_SLAVE0='bus-pci-0000:04:02.0' BONDING_SLAVE1='bus-pci-0000:04:02.1'
Let me know if this helps!
Unfortunately not. I still have the problem both using pci info and adapting your config file. I guess is something wrong with the configuration as I have the same problem anywhere I try (openSuSE as well as SLES) Jan
On 5/17/07, Michael Kershaw
wrote: Jan,
What type of switch are you connected too out of curiousity, and do you have control of the switch? I'll review your configuration in the mean time to see if I can see any oddities.
Mike Kershaw
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org