I think you wanted ip a without dash which gives the following output ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br1 state UP group default qlen 1000 link/ether 68:05:ca:61:93:8f brd ff:ff:ff:ff:ff:ff 3: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP group default qlen 1000 link/ether fc:aa:14:09:76:16 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 8e:8b:b7:86:d9:f9 brd ff:ff:ff:ff:ff:ff inet 192.168.188.26/24 brd 192.168.188.255 scope global br0 valid_lft forever preferred_lft forever inet6 2003:c9:6f18:bdfc:abf4:4cd3:dbc0:1a01/64 scope global temporary dynamic valid_lft 6184sec preferred_lft 2583sec inet6 2003:c9:6f18:bdfc:8c8b:b7ff:fe86:d9f9/64 scope global dynamic mngtmpaddr valid_lft 6184sec preferred_lft 2583sec inet6 fe80::8c8b:b7ff:fe86:d9f9/64 scope link valid_lft forever preferred_lft forever 5: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 8a:f6:21:66:dd:78 brd ff:ff:ff:ff:ff:ff inet 192.168.178.51/24 brd 192.168.178.255 scope global br1 valid_lft forever preferred_lft forever inet6 2003:c9:6f18:bd00:1ed7:543f:ba0a:4a2b/64 scope global temporary dynamic valid_lft 6986sec preferred_lft 1585sec inet6 2003:c9:6f18:bd00:88f6:21ff:fe66:dd78/64 scope global dynamic noprefixroute valid_lft 6986sec preferred_lft 1585sec inet6 fe80::88f6:21ff:fe66:dd78/64 scope link valid_lft forever preferred_lft forever silversurfer:~ # cat /etc/sysconfig/network/ifcfg-br0 BOOTPROTO='dhcp' STARTMODE='auto' BRIDGE='yes' BRIDGE_PORTS='enp8s0' BRIDGE_STP='off' BRIDGE_FORWARDDELAY='15' ZONE=public silversurfer:/home/entropy # cat /etc/sysconfig/network/ifcfg-enp7s0 BOOTPROTO='none' STARTMODE='auto' ZONE=public The other two are for a secondary router taking its address via dhcp and allowing wlan in on of my rooms. In data domenica 8 gennaio 2023 13:12:52 CET, Masaru Nomiya ha scritto:
Please show the result of;
# ip -a
and
$ cat /etc/sysconfig/network/ifcfg-XXX
where xxx is your network device.