![](https://seccdn.libravatar.org/avatar/4028784d4bb60f369bb22f15249241e9.jpg?s=120&d=mm&r=g)
Hi, Switching to Linux with OpenSUSE 10.2 (x86_64) in my desktop. Installation picked up almost all my hardware which I am very happy about. Using a ATI Radeon X850XT which was detected correctly. Once all installed I started with eye candy stuffs (Xgl, Beryl etc). Doesn't work!! As soon as I enable Xgl, on reboot my X crashes. I did not find OpenSuSE ATI docs to be very clear. How do I know if the installer+updates during install used a ATI driver? How do I check the info/version of the installed driver? Do I need to install a latest from ATI site anyway? They say they are compitable uptoto Xorg 7.1 only. OpenSuSE 10.2 has 7.2 RC (which is a 7.1 in real version numbering) . Is that OK? Regards, Mohammad #hwinfo -- gfxcard 26: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_1002_5d52 Unique ID: VCu0.tam09kjrLT1 Parent ID: vSkL.76Y+ZaqIO10 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "ATI PowerColor X850XT PCIe Primary" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5d52 "Radeon X850 XT (R480) (PCIE)" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x0b12 "PowerColor X850XT PCIe Primary" Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xe1000000-0xe100ffff (rw,non-prefetchable) I/O Ports: 0x9000-0x9fff (rw) Memory Range: 0xe0000000-0xe001ffff (ro,prefetchable,disabled) IRQ: 5 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00005D52sv00001002sd00000B12bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: radeon Driver Info #1: XFree86 v4 Server Module: fglrx 3D Support: yes Extensions: dri Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge) 27: PCI 100.1: 0380 Display controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_1002_5d72 Unique ID: NXNs.uU_I200nq85 Parent ID: vSkL.76Y+ZaqIO10 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: graphics card Model: "ATI R480 [Radeon X850XT (PCIE)] (Secondary)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5d72 "R480 [Radeon X850XT (PCIE)] (Secondary)" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x0b13 Memory Range: 0xe1010000-0xe101ffff (rw,non-prefetchable) Module Alias: "pci:v00001002d00005D72sv00001002sd00000B13bc03sc80i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge) Primary display adapter: #26 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org