On Mon, Jul 10, 2017 at 12:51 PM, John Andersen <jsamyth@gmail.com> wrote:
On 07/10/2017 08:25 AM, Paul Groves wrote:
Would my SCSI Card have terminator resistors built in?
Look for physical terminators or dual cable sockets.
There is no rule that the card must be at the end of a cable. SCSI cards can be in the middle, with devices on both sides.
Its unusual to find a single jumper controlling the resistors on 8, 16, or 24 parallel lines. It costs more electronics to do that than just include a 12 cent resistor pack.
I don't have SCSI in my systems anymore, but the last controllers I used had a BIOS setting to enable/disable the controller termination resistors. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org