Hello list dwellers, some simplistic leap 15.3 system, just applied tonights kernel update fix currently installed packages, dunno why after reboot surplus kernels dont get cleaned up btw. used to be in the past? anyhow: rpm -aq | grep kernel | sort kernel-default-5.3.18-150300.59.43.1.x86_64 kernel-default-5.3.18-59.40.1.x86_64 kernel-default-extra-5.3.18-150300.59.43.1.x86_64 kernel-default-extra-5.3.18-59.40.1.x86_64 kernel-default-optional-5.3.18-150300.59.43.1.x86_64 kernel-default-optional-5.3.18-59.40.1.x86_64 kernel-firmware-all-20210208-2.4.noarch kernel-firmware-amdgpu-20210208-2.4.noarch kernel-firmware-ath10k-20210208-2.4.noarch kernel-firmware-ath11k-20210208-2.4.noarch kernel-firmware-atheros-20210208-2.4.noarch kernel-firmware-bluetooth-20210208-2.4.noarch kernel-firmware-bnx2-20210208-2.4.noarch kernel-firmware-brcm-20210208-2.4.noarch kernel-firmware-chelsio-20210208-2.4.noarch kernel-firmware-dpaa2-20210208-2.4.noarch kernel-firmware-i915-20210208-2.4.noarch kernel-firmware-intel-20210208-2.4.noarch kernel-firmware-iwlwifi-20210208-2.4.noarch kernel-firmware-liquidio-20210208-2.4.noarch kernel-firmware-marvell-20210208-2.4.noarch kernel-firmware-media-20210208-2.4.noarch kernel-firmware-mediatek-20210208-2.4.noarch kernel-firmware-mellanox-20210208-2.4.noarch kernel-firmware-mwifiex-20210208-2.4.noarch kernel-firmware-network-20210208-2.4.noarch kernel-firmware-nfp-20210208-2.4.noarch kernel-firmware-nvidia-20210208-2.4.noarch kernel-firmware-platform-20210208-2.4.noarch kernel-firmware-prestera-20210208-2.4.noarch kernel-firmware-qlogic-20210208-2.4.noarch kernel-firmware-radeon-20210208-2.4.noarch kernel-firmware-realtek-20210208-2.4.noarch kernel-firmware-serial-20210208-2.4.noarch kernel-firmware-sound-20210208-2.4.noarch kernel-firmware-ti-20210208-2.4.noarch kernel-firmware-ueagle-20210208-2.4.noarch kernel-firmware-usb-network-20210208-2.4.noarch purge-kernels-service-0-8.3.1.noarch right now only via nomodeset as additional grub2 parameter in that command line there able to boot into this system. otherwise after grub2 screen and selection or timeout into boot, whole screen gets back, becomes powersaved (monitor says no signal, powersaves itself thereafter) no ctrl alt del no numlock LED no nothing. no hdd events/LED whole system needs to use the reset button to come back up again into BIOS/POST and grub2 screen again and continuing there only with additional nomodeset parameter. some elderly amd / amd gpu/chipset based system. worked neatly until a few minutes ago before the kernel update :( Linux linux 5.3.18-150300.59.43-default #1 SMP Sun Jan 23 19:27:23 UTC 2022 (c76af22) x86_64 x86_64 x86_64 GNU/Linux 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4200] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard Flags: bus master, fast devsel, latency 0, IRQ 10, NUMA node 0 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at c000 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel modules: radeon 01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard Flags: bus master, fast devsel, latency 0, IRQ 19, NUMA node 0 Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel what now? kernel rpm changelog showd quite a lot of amd/drm fixage and stuff. anyone able to fix this quickly? thanks. TIA