Using 10.0 OSS and the RPM supplied by Konica Minolta (2530DL2.0.0-1.i386.rpm), I am able to print to a networked magicolor 2530DL. But whenever I print, the LCD on the printer reads "SIZE MISMATCH" and the printer seems to try to print on a larger paper size despite everything being configured for "Letter" size. When this has happened with other printers, I usually find that "A4" has been defaulted somewhere; changing to "Letter" gets things working properly. But in this case, I cannot find any place where "A4" is being specified... lpoptions -p magicolor -l | grep A4 PageRegion/PageRegion: Letter Legal Executive A4 A5 ISOB5 UKQuarto Foolscap Folio Com10 DL C5 Monarch Statement JPostcard DPostcard C6 JISB5 16Kai 32Kai EnvChou3 EnvChou4 EnvYou4 GovtLegal LetterPlus GovtLetter 16_K Photo_4x6 Photo_10x15 PageSize/Paper Size: *Letter Legal Executive A4 A5 ISOB5 UKQuarto Foolscap Folio Com10 DL C5 Monarch Statement JPostcard DPostcard C6 JISB5 16Kai 32Kai EnvChou3 EnvChou4 EnvYou4 GovtLegal LetterPlus GovtLetter 16_K Photo_4x6 Photo_10x15 Custom One weird thing I noticed is that it seems to be impossible to set a default for both PageRegion and PageSize. As in, if /etc/cups/lpoptions reads: Default magicolor PageRegion=Letter PageSize=Letter Then I'll see "*Letter" in PageSize but just "Letter" in PageRegion. But if /etc/cups/lpoptions reads: Default magicolor PageSize=Letter PageRegion=Letter Then I'll see just "Letter" in PageSize but "*Letter" in PageRegion. Something I'm not understanding there. Anyway, I've checked the ppd... grep -i default /etc/cups/ppd/magicolor.ppd | grep Letter *DefaultPageSize: Letter *DefaultPageRegion: Letter *DefaultImageableArea: Letter *DefaultPaperDimension: Letter I've tried using the web interface to configure/print, but still get the same problem. Can someone lend advice before I blow all my toner on test pages? Thanks, Ross -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org