On 19 Nov 2017, at 08:30, Felix Miata <mrmazda@earthlink.net> wrote:
I have cloned 1TB hard drive to 3TB hardware RAID 5 with dd if=/dev/sda of=/dev/sdb bs=64K conv=noerror,sync status=progress
For whatever reason system don't start after boot prompt, its seems root partition can't be mounted.
Before you made the clone, did you include the driver/module for your RAID5 controller in the initrd on the 1TB HD that you cloned from?
Thanks, Felix, this is 90% possibly source of the fault. Is it possible to somehow load 3ware driver at boot and re-generate initrd, either from boot prompt or rescue system ?
-- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation)
Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!
Felix Miata *** http://fm.no-ip.com/
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org