![](https://seccdn.libravatar.org/avatar/98e1a329ca6e6ee4480bee3c2ef7eb4f.jpg?s=120&d=mm&r=g)
I checked the pin setup, and the voltages correspond. ATX
just has the extra one with 3.3v. I know I won't fry the
board, I just want to know if anyone's ever done this, and
if it works.
The board is a 1999 model, the psu probably about two years
older.
Thanks
Hans
On Mon, 23 Sep 2002 10:05:38 -0400
Patrick
On Monday 23 September 2002 08:25, H du Plooy wrote:
Is it possible to run an ATX board from an AT power supply? I checked the pin setup on both, the only thing that's missing is the 3.3v, which I assume is for communication between the board and PSU which shouldn't be neccessary, since I would be switching the PSU on and off directly.
Thanks Hans ================
Hans, There are adapters that you can get to make it work, but if you are using a newer motherboard and the power supply is an older unit, I am not sure I would advise it. Voltages changed for the new motherboards in some ways and you could be taking the chance of killing it using the older power supply.
Patrick -- --- KMail v1.4.3 --- SuSE Linux Pro v8.0 --- Registered Linux User #225206
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
== Book all your travel arrangements online from a selection of partners on Ananzi Travel. http://www.ananzi.co.za/cgi-bin/goto.pl?Travel