On 02-09-2010 14:34, Felix Miata wrote:
On 2010/09/02 12:29 (GMT+0200) Erik Jakobsen composed:
I run opensuse 11.3 with GeForce 6200. It is running ok at 1600x1200 The monitoris an Acer X233H. But at 1900x1024 it will not work. Why do you expect a native 1920x1080 device to work at 1900x1024?
I was not quite sure what resolution the 19xxXyyyy was, so that was a guess only.
I have here what I get from running startx: ... Parse error on line 91 of section Monitor in file /etc/X11/xorg.conf This section must have an Identifier line. (EE) Problem parsing the config file (EE) Error parsing the config file ...
Xorg.0.log claims to have just told you at least part of your problem right there.
But as I'm not sure what the info means, it would be nice to have info on what I do.
This is my xorg.conf 11.3 doesn't have SaX2 any more, so what follows is inexplicable, unless you copied it from an earlier openSUSE version, like 11.2, which uses v8.1.
I now that about Sax2 not being with in 11.3. The xorg.conf I use is a one from 11.2, that worked. I never tested it with 1900x1024. For now it is slightly modified. Here is the original copy from 11.2: # /.../ # SaX generated X11 config file # Created on: 2010-06-15T08:47:02+0200. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" FontPath "/usr/share/fonts/latin2/100dpi:unscaled" FontPath "/usr/share/fonts/latin2/Type1" FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" Option "ZapWarning" "on" EndSection Section "Module" Load "dri" Load "dbe" Load "extmod" Load "glx" EndSection Section "InputDevice" # Driver "kbd" will be disabled unless 'Option "AutoAddDevices" "off"' # is set in "ServerFlags" section. Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "dk" Option "XkbModel" "microsoftpro" Option "XkbRules" "xfree86" EndSection Section "InputDevice" # Driver "mouse" will be disabled unless 'Option "AutoAddDevices" "off"' # is set in "ServerFlags" section. Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "ImPS/2 Generic Wheel Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 305 230 HorizSync 31-75 Identifier "Monitor[0]" ModelName "1600X1200@60HZ" Option "PreferredMode" "1600x1200" VendorName "--> VESA" VertRefresh 50-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "GeForce FX 5200" Driver "nvidia" Identifier "Device[0]" VendorName "NVIDIA" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" Option "Composite" "on" EndSection
# /.../ # SaX generated X11 config file # Created on: 2010-06-15T08:47:02+0200. # # Version: 8.1 What shall I do now Report back what happens when you start X after having removed xorg.conf from 11.3's /etc/X11. Optionally, also try starting with xorg.conf, but only after fixing the parse error reported by the log. I restarted without the xorg.conf, and now I only have 1024x768 resolution.
The /etc/X11/xorg.conf.d/50-monitor.conf has this: Section "Monitor" Identifier "Default Monitor" ## If your monitor doesn't support DDC you may override the ## defaults here HorizSync 54.2-83.8 VertRefresh 49-75 ## Add your mode lines here, use e.g the cvt tool EndSection What to get greater resolution now ? /Erik -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org