Hi,
having a problem logging back in as a user on my 10.1
box. Had this problem once before on 9.3 or 10.0 cant
remember which, but it was because the home dir was
full. Not the case this time as you can see below.
signed in as root, changed my user login to auto, and
and no password, tried it both ways, it still tries to
login, then goes back to the login screen. I can only
login as root. Would anyone have any ideas? Thanks
so much.
linux-steve:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda2 21G 6.6G 14G 33% /
udev 252M 180K 252M 1% /dev
/dev/hda3 53G 4.3G 49G 9% /home
/dev/sda1 75G 14G 61G 19%
/media/SEA_DISC
linux-steve:~ #
SYSTEM LOG from network setup on......
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: VIA Technologies, Inc.
VT6102 [Rhine-II] (rev 78)
eth0 configuration: eth-id-00:0e:a6:9d:4e:df
eth0 (DHCP) . <notice>pidofproc: dhcpcd 3063
<notice>killproc: kill(2478,20)
<notice>killproc: kill(2466,1)
<notice>killproc: kill(2478,18)
<notice>killproc: kill(2478,12)
IP/Netmask: 192.168.1.103 / 255.255.255.0
doneSetting up service network . . . . . . . .
. . . . . . . .done
Starting mdnsd<notice>startproc: execve
(/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f
/etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/usr/sbin/mdnsd ]
done
Starting auditd <notice>startproc: execve
(/sbin/auditd) [ /sbin/auditd -n ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux
SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin
vga=0x31a RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/sbin/auditd ]
done
Starting RPC portmap daemon<notice>startproc: execve
(/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux
SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin
vga=0x31a RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/sbin/portmap ]
done
Importing Net File System (NFS)unused
Checking/updating CPU microcode unused
<notice>startproc: execve (/usr/sbin/cupsd) [
/usr/sbin/cupsd ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice
DAEMON=/usr/sbin/cupsd ]
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [
/usr/sbin/nscd ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/usr/sbin/nscd ]
Starting cupsddone
Starting Name Service Cache Daemondone
Starting ZENworks Management Daemondone
Requested buffer size 2048, fragment size 1024
ALSA pcm 'default' set buffer size 2048, period size
1024 bytes
TiMidity starting in ALSA server mode
Opening sequencer port: 128:0 128:1 128:2 128:3
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/sshd) [
/usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux
SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin
vga=0x31a RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [
/usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3
], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin
SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N
DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
Starting mail service (Postfix)done
Starting INET services. (xinetd)<notice>startproc:
execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux
SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin
vga=0x31a RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/usr/sbin/xinetd ]
<notice>startproc: execve (/usr/sbin/cron) [
/usr/sbin/cron ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/opt/gnome/sbin/gdm) [
/opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86
KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg
LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 SHLVL=2 HOME=/
XCURSOR_THEME=Industrial
WINDOWMANAGER=/usr/X11R6/bin/gnome splash=silent
SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc
DAEMON=/opt/gnome/sbin/gdm ]
done
Starting service gdmdone
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: boot.apparmor
Skipped services in runlevel 5: irq_balancer nfs
microcode smbfs
<notice>killproc: kill(2388,3)
SYSTEM LOG FROM LAST REBOOT
Oct 30 21:44:38 linux-steve gdm[3718]: Master
rebooting...
Oct 30 21:44:41 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:44:43 linux-steve shutdown[3718]: shutting
down for system reboot
Oct 30 21:44:43 linux-steve init: Switching to
runlevel: 6
Oct 30 21:44:45 linux-steve kernel: bootsplash: status
on console 0 changed to on
Oct 30 21:44:45 linux-steve auditd[3286]: The audit
daemon is exiting.
Oct 30 21:44:45 linux-steve kernel:
audit(1162262685.805:7): audit_pid=0 old=3286 by
auid=4294967295
Oct 30 21:44:46 linux-steve sshd[3686]: Received
signal 15; terminating.
Oct 30 21:44:47 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:44:47 linux-steve xinetd[3720]: Exiting...
Oct 30 21:44:48 linux-steve kernel: Kernel logging
(proc) stopped.
Oct 30 21:44:48 linux-steve kernel: Kernel log daemon
terminating.
Oct 30 21:44:49 linux-steve syslog-ng[2403]: syslog-ng
version 1.6.8 going down
Oct 30 21:46:28 linux-steve syslog-ng[2456]: syslog-ng
version 1.6.8 starting
Oct 30 21:46:29 linux-steve ifstatus: lo
Oct 30 21:46:29 linux-steve ifstatus: lo is up
Oct 30 21:46:29 linux-steve ifstatus: 1: lo:
mtu 16436 qdisc noqueue
Oct 30 21:46:29 linux-steve ifstatus:
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Oct 30 21:46:29 linux-steve ifstatus: inet
127.0.0.1/8 scope host lo
Oct 30 21:46:29 linux-steve ifstatus: IP
address: 127.0.0.1/8
Oct 30 21:46:29 linux-steve ifstatus-route: Configured
routes for interface lo:
Oct 30 21:46:29 linux-steve ifstatus-route: 127/8 -
- lo
Oct 30 21:46:29 linux-steve ifstatus-route: Active
routes for interface lo:
Oct 30 21:46:29 linux-steve ifstatus-route:
127.0.0.0/8 scope link
Oct 30 21:46:29 linux-steve ifstatus-route: 1 of 1
configured routes for interface lo up
Oct 30 21:46:29 linux-steve ifup: lo
Oct 30 21:46:29 linux-steve ifup: lo
Oct 30 21:46:29 linux-steve ifup: IP address:
127.0.0.1/8
Oct 30 21:46:29 linux-steve ifup:
Oct 30 21:46:30 linux-steve ifup: eth0
device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
78)
Oct 30 21:46:30 linux-steve ifup: eth0
configuration: eth-id-00:0e:a6:9d:4e:df
Oct 30 21:46:31 linux-steve ifup-dhcp: eth0
(DHCP)
Oct 30 21:46:31 linux-steve ifup-dhcp: .
Oct 30 21:46:31 linux-steve modify_resolvconf: Service
dhcpcd modified /etc/resolv.conf. See info block in
this file
Oct 30 21:46:31 linux-steve ifup: eth0
device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
78)
Oct 30 21:46:31 linux-steve ifup: eth0
configuration: eth-id-00:0e:a6:9d:4e:df
Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, log
source = /proc/kmsg started.
Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1,
---------- state change ----------
Oct 30 21:46:31 linux-steve kernel: Kernel logging
(proc) stopped.
Oct 30 21:46:31 linux-steve syslog-ng[2456]: SIGHUP
received, restarting syslog-ng
Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1,
---------- state change ----------
Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, log
source = /proc/kmsg started.
Oct 30 21:46:31 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:46:32 linux-steve syslog-ng[2456]: new
configuration initialized
Oct 30 21:46:31 linux-steve kernel: ACPI: Power Button
(FF) [PWRF]
Oct 30 21:46:32 linux-steve ifup-dhcp: IP/Netmask:
192.168.1.103
Oct 30 21:46:32 linux-steve ifup-dhcp: /
255.255.255.0
Oct 30 21:46:32 linux-steve ifup-dhcp:
Oct 30 21:46:32 linux-steve syslog-ng[2456]: Changing
permissions on special file /dev/xconsole
Oct 30 21:46:32 linux-steve syslog-ng[2456]: Changing
permissions on special file /dev/tty10
Oct 30 21:46:32 linux-steve mDNSResponder (Engineering
Build) (Apr 23 2006 01:49:36) [3293]: starting
Oct 30 21:46:32 linux-steve auditd[3319]: Init
complete, auditd 1.1.3 listening for events
Oct 30 21:46:33 linux-steve kernel: NET: Registered
protocol family 10
Oct 30 21:46:33 linux-steve kernel: lo: Disabled
Privacy Extensions
Oct 30 21:46:33 linux-steve kernel: IPv6 over IPv4
tunneling driver
Oct 30 21:46:33 linux-steve kernel: klogd 1.4.1,
---------- state change ----------
Oct 30 21:46:33 linux-steve ifup: sit0
Oct 30 21:46:33 linux-steve ifup: No
configuration found for sit0
Oct 30 21:46:35 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:46:35 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:46:35 linux-steve kernel: powernow-k8:
Processor cpuid 6a0 not supported
Oct 30 21:46:36 linux-steve /usr/sbin/cron[3650]:
(CRON) STARTUP (V5.0)
Oct 30 21:46:36 linux-steve rcpowersaved: CPU
frequency scaling is not supported by your processor.
Oct 30 21:46:36 linux-steve rcpowersaved: enter
'CPUFREQ_ENABLED=no' in /etc/powersave/cpufreq to
avoid this warning.
Oct 30 21:46:36 linux-steve rcpowersaved: Cannot load
cpufreq governors - No cpufreq driver available
Oct 30 21:46:37 linux-steve rcpowersaved: s2ram does
not know your machine. See 's2ram -i' for details.
(127)
Oct 30 21:46:37 linux-steve rcpowersaved: Use
SUSPEND2RAM_FORCE=yes to override this detection.
Oct 30 21:46:37 linux-steve sshd[3721]: Server
listening on :: port 22.
Oct 30 21:46:37 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:46:37 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:46:37 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/chargen
[file=/etc/xinetd.conf] [line=26]
Oct 30 21:46:37 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/chargen-udp
[file=/etc/xinetd.d/chargen-udp] [line=14]
Oct 30 21:46:37 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/cups-lpd
[file=/etc/xinetd.d/cups-lpd] [line=15]
Oct 30 21:46:37 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/cvs
[file=/etc/xinetd.d/cvs] [line=11]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/daytime
[file=/etc/xinetd.d/daytime] [line=16]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/daytime-udp
[file=/etc/xinetd.d/daytime-udp] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/echo
[file=/etc/xinetd.d/echo] [line=15]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/echo-udp
[file=/etc/xinetd.d/echo-udp] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/fam
[file=/etc/xinetd.d/fam] [line=15]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/i4l-vbox
[file=/etc/xinetd.d/i4l-vbox] [line=17]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/imap
[file=/etc/xinetd.d/imap] [line=10]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/netstat
[file=/etc/xinetd.d/netstat] [line=69]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/qpopper
[file=/etc/xinetd.d/qpopper] [line=16]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/rsync
[file=/etc/xinetd.d/rsync] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/sane-port
[file=/etc/xinetd.d/sane-port] [line=12]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/servers
[file=/etc/xinetd.d/servers] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/services
[file=/etc/xinetd.d/services] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/swat
[file=/etc/xinetd.d/swat] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/systat
[file=/etc/xinetd.d/systat] [line=12]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/tftp
[file=/etc/xinetd.d/tftp] [line=17]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/time
[file=/etc/xinetd.d/time] [line=14]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/time-udp
[file=/etc/xinetd.d/time-udp] [line=15]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/vnc
[file=/etc/xinetd.d/vnc] [line=15]
Oct 30 21:46:38 linux-steve xinetd[3762]: Reading
included configuration file: /etc/xinetd.d/vsftpd
[file=/etc/xinetd.d/vsftpd] [line=88]
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
chargen
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
chargen
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
printer
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
cvspserver
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
daytime
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
daytime
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
echo
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
echo
Oct 30 21:46:38 linux-steve xinetd[3762]: removing fam
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
vboxd
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
pop2
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
pop3
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
pop3s
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
imap
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
imaps
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
netstat
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
pop3
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
rsync
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
sane-port
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
servers
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
services
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
swat
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
systat
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
tftp
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
time
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
time
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
vnc2
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
vnc3
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
vnchttpd2
Oct 30 21:46:38 linux-steve xinetd[3762]: removing
vnchttpd3
Oct 30 21:46:38 linux-steve xinetd[3762]: removing ftp
Oct 30 21:46:38 linux-steve xinetd[3762]: xinetd
Version 2.3.14 started with libwrap loadavg options
compiled in.
Oct 30 21:46:38 linux-steve xinetd[3762]: Started
working: 2 available services
Oct 30 21:46:39 linux-steve kernel: bootsplash: status
on console 0 changed to on
Oct 30 21:46:39 linux-steve hp: unable to open
/var/run/hpiod.port: No such file or directory:
prnt/hpijs/hplip_api.c 84
Oct 30 21:46:39 linux-steve zmd: NetworkManagerModule
(WARN): Failed to connect to NetworkManager
Oct 30 21:46:43 linux-steve kernel: eth0: no IPv6
routers present
Oct 30 21:47:30 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:47:30 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:47:47 linux-steve zmd: Daemon (WARN): Not
starting remote web server
Oct 30 21:47:54 linux-steve gconfd (steve-4016):
starting (version 2.12.1), pid 4016 user 'steve'
Oct 30 21:47:54 linux-steve gconfd (steve-4016):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:47:54 linux-steve gconfd (steve-4016):
Resolved address "xml:readwrite:/home/steve/.gconf" to
a writable configuration source at position 1
Oct 30 21:47:54 linux-steve gconfd (steve-4016):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:48:24 linux-steve gconfd (steve-4016): GConf
server is not in use, shutting down.
Oct 30 21:48:24 linux-steve gconfd (steve-4016):
Exiting
Oct 30 21:49:21 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:50:06 linux-steve gconfd (steve-4531):
starting (version 2.12.1), pid 4531 user 'steve'
Oct 30 21:50:06 linux-steve gconfd (steve-4531):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:50:06 linux-steve gconfd (steve-4531):
Resolved address "xml:readwrite:/home/steve/.gconf" to
a writable configuration source at position 1
Oct 30 21:50:06 linux-steve gconfd (steve-4531):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:50:36 linux-steve gconfd (steve-4531): GConf
server is not in use, shutting down.
Oct 30 21:50:36 linux-steve gconfd (steve-4531):
Exiting
Oct 30 21:50:38 linux-steve gconfd (steve-4726):
starting (version 2.12.1), pid 4726 user 'steve'
Oct 30 21:50:38 linux-steve gconfd (steve-4726):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:50:38 linux-steve gconfd (steve-4726):
Resolved address "xml:readwrite:/home/steve/.gconf" to
a writable configuration source at position 1
Oct 30 21:50:38 linux-steve gconfd (steve-4726):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:50:56 linux-steve zmd: ServiceManager
(ERROR): Service Refresh Failed: Failed to parse XML
metadata: Can't add repository at
http://ftp-linux.cc.gatech.edu/pub/suse/suse/update/10.1:
Cannot create the installation source
Oct 30 21:50:59 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:05 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:08 linux-steve gconfd (steve-4726): GConf
server is not in use, shutting down.
Oct 30 21:51:08 linux-steve gconfd (steve-4726):
Exiting
Oct 30 21:51:11 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:17 linux-steve gconfd (root-4918):
starting (version 2.12.1), pid 4918 user 'root'
Oct 30 21:51:17 linux-steve gconfd (root-4918):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:51:17 linux-steve gconfd (root-4918):
Resolved address "xml:readwrite:/root/.gconf" to a
writable configuration source at position 1
Oct 30 21:51:17 linux-steve gconfd (root-4918):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:51:17 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:23 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:23 linux-steve gconfd (root-4918):
Resolved address "xml:readwrite:/root/.gconf" to a
writable configuration source at position 0
Oct 30 21:51:26 linux-steve kernel: ISO 9660
Extensions: Microsoft Joliet Level 3
Oct 30 21:51:26 linux-steve kernel: ISO 9660
Extensions: RRIP_1991A
Oct 30 21:51:29 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:35 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:41 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:47 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:53 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:51:59 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:05 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:11 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:17 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:23 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:29 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:33 linux-steve gconfd (root-4918):
Exiting
Oct 30 21:52:33 linux-steve gconfd (root-5095):
starting (version 2.12.1), pid 5095 user 'root'
Oct 30 21:52:33 linux-steve gconfd (root-5095):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:52:33 linux-steve gconfd (root-5095):
Resolved address "xml:readwrite:/root/.gconf" to a
writable configuration source at position 1
Oct 30 21:52:33 linux-steve gconfd (root-5095):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:52:35 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:41 linux-steve gconfd (steve-5172):
starting (version 2.12.1), pid 5172 user 'steve'
Oct 30 21:52:41 linux-steve gconfd (steve-5172):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:52:41 linux-steve gconfd (steve-5172):
Resolved address "xml:readwrite:/home/steve/.gconf" to
a writable configuration source at position 1
Oct 30 21:52:41 linux-steve gconfd (steve-5172):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:52:41 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:47 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:53 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:52:59 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:03 linux-steve gconfd (root-5095): GConf
server is not in use, shutting down.
Oct 30 21:53:03 linux-steve gconfd (root-5095):
Exiting
Oct 30 21:53:05 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:11 linux-steve gconfd (steve-5172): GConf
server is not in use, shutting down.
Oct 30 21:53:11 linux-steve gconfd (steve-5172):
Exiting
Oct 30 21:53:11 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:17 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:18 linux-steve gdm[3843]: Couldn't
authenticate user
Oct 30 21:53:23 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:27 linux-steve gdm[3843]: Couldn't
authenticate user
Oct 30 21:53:29 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:35 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Oct 30 21:53:35 linux-steve gconfd (steve-5242):
starting (version 2.12.1), pid 5242 user 'steve'
Oct 30 21:53:35 linux-steve gconfd (steve-5242):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory"
to a read-only configuration source at position 0
Oct 30 21:53:35 linux-steve gconfd (steve-5242):
Resolved address "xml:readwrite:/home/steve/.gconf" to
a writable configuration source at position 1
Oct 30 21:53:35 linux-steve gconfd (steve-5242):
Resolved address
"xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults"
to a read-only configuration source at position 2
Oct 30 21:53:41 linux-steve kernel: ACPI Warning
(acpi_thermal-0644): Unable to turn cooling device
[dffd8ba0] 'on' [20060127]
Steve Reilly
http://reillyblog.com/
Registered Linux user: 412217
http://counter.li.org/
____________________________________________________________________________________
Low, Low, Low Rates! Check out Yahoo! Messenger's cheap PC-to-Phone call rates
(http://voice.yahoo.com)
