On Monday 2015-03-02 09:11, Per Jessen wrote:
After testing/preparing it for a few weeks, I only just yesterday switched our main router/firewall to 13.2. I have 5 static interfaces, I see no problems - sofar :-)
Here's one example config, looks a lot like yours:
BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='192.168.2.7/21' MTU='' NAME='NetXtreme BCM5703X Gigabit Ethernet' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' IPADDR_='2001:8e0:2010:1ff::1:1/64'
wicked: device enp5s0: operation timed out enp5s0 setup-in-progress
??
Is the cable plugged in?
plugged in. now working. i also managed to get openvpn work and could dial in via pppoe (using this great manual: https://forums.opensuse.org/showthread.php/502199-UPGRADING-REMOVES-PPPOE- ) enp4s0 Link encap:Ethernet HWaddr 00:0E:B6:29:4F:60 inet addr:172.18.0.3 Bcast:172.18.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9919 errors:0 dropped:528 overruns:0 frame:0 TX packets:5730 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2162570 (2.0 Mb) TX bytes:1333701 (1.2 Mb) Interrupt:6 enp5s0 Link encap:Ethernet HWaddr 00:0E:B6:29:4F:61 inet addr:172.19.0.1 Bcast:172.19.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1353 errors:0 dropped:0 overruns:0 frame:0 TX packets:43 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:279771 (273.2 Kb) TX bytes:2754 (2.6 Kb) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:336 (336.0 b) TX bytes:336 (336.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:92.79.27.69 P-t-P:82.82.6.200 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1488 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:237368 (231.8 Kb) TX bytes:54 (54.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:172.17.0.1 P-t-P:172.17.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) this now looks quiet similiar to what I have on 12.3: dsl0 Link encap:Point-to-Point Protocol inet addr:92.79.27.69 P-t-P:82.82.6.200 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1488 Metric:1 RX packets:24745 errors:0 dropped:0 overruns:0 frame:0 TX packets:23320 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:21615463 (20.6 Mb) TX bytes:13421697 (12.7 Mb) eth0 Link encap:Ethernet HWaddr 94:0C:6D:80:6E:34 inet addr:172.18.0.1 Bcast:172.18.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14734369 errors:0 dropped:4 overruns:0 frame:0 TX packets:10360402 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13369312130 (12749.9 Mb) TX bytes:7588754967 (7237.2 Mb) eth1 Link encap:Ethernet HWaddr 48:5B:39:CA:14:4A inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9072592 errors:0 dropped:0 overruns:0 frame:0 TX packets:7271748 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7638837699 (7284.9 Mb) TX bytes:3771938242 (3597.2 Mb) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:969211 errors:0 dropped:0 overruns:0 frame:0 TX packets:969211 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1232251670 (1175.1 Mb) TX bytes:1232251670 (1175.1 Mb) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:172.17.0.1 P-t-P:172.17.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:4422586 errors:0 dropped:0 overruns:0 frame:0 TX packets:2287687 errors:0 dropped:127 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:5424942159 (5173.6 Mb) TX bytes:146516942 (139.7 Mb) I hope there won't be problems with asterisk and CAPI on 13.2 - I do not have a second AVM B1 controller to test. Thanks a lot for your help. Paul -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org