David C. Rankin wrote:
Sbs Bofh wrote:
For years I've been setting up (open)suse machines with three (or more) partitions - each one using software RAID1, all partitions created and RAID set up during the installation. Has worked (at least up to 10.3) like a dream...
/dev/md0 as /boot, /dev/md1 as /, and /dev/md2 as swap is(was) my current standard.
Is it true that you simply can't do this (at least the /boot bit) with opensuse 11.x?
NO that is the way I run 11.0 and it runs fine.
Are you sure ? Are you using Grub ? Have you tried to unplug the first HD to see if it boots ? In my case, in all installs I did, the YaST system did not install itself on the second HD. -- Rui Santos http://www.ruisantos.com/ Veni, vidi, Linux! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org