Hi, My USB-Bluetooth adapter can't pair with my bluetooth headset. It worked in Leap 15.2. The bluetooth assistant, i.e. the bluetooth applet searches for the headset, but doesn't find it. hwinfo (below) outputs much information, I hope I found the interesting bit. Any ideas? Peter --------------------------------------------------------------------- ============ start debug info ============ libhd version 21.72 (x86-64) [7688] using /var/lib/hardware kernel version is 5.3 ----- /proc/cmdline ----- BOOT_IMAGE=/boot/vmlinuz-5.3.18-59.5-default root=UUID=adea8b9e-b878-4afa-89c9-337797cc8b56 splash=verbose noresume mitigations=auto ----- /proc/cmdline end ----- ... 77: USB 00.0: 11500 Bluetooth Device [Created at usb.122] Unique ID: POWV.nQKjiuCfL84 Parent ID: k4bc.kNaPe9SZft4 SysFS ID: /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-9/1-9:1.0 SysFS BusID: 1-9:1.0 Hardware Class: bluetooth Model: "Cambridge Silicon Radio Bluetooth Dongle (HCI mode)" Hotplug: USB Vendor: usb 0x0a12 "Cambridge Silicon Radio, Ltd" Device: usb 0x0001 "Bluetooth Dongle (HCI mode)" Revision: "88.91" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v0A12p0001d8891dcE0dsc01dp01icE0isc01ip01in00" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #86 (Hub) ---------------------------------------------------------------------