Hello group, I am trying to evaluate use of fibre channel switched fabric. But I am not able to get it working (openSUSE Leap 15.1). I would appreciate, if anybody knows something or where to find (working) instructions. All instructions I found refer to old/or proprietary drivers/methods (kernel 2.6 or older). I use following hardware: -HP branded (AE312 - 60001) QLogic Corp. ISP2432 4G HBA PCIe -IBM branded (2005-B16) Brocade 200E 16 Port FC switch -DS14MK2 Disk Shelf All of those products are EOS and I am not able to get proprietary drivers or firmware updates. According to switch config everything looks fine, I even put all devices into one zone. According to switch configuration, all the targets should be accessible by the initiators: https://www.swabian.net/extern/opensuse/fcaccessibility.png Having set up following options for qla2xxx module ql2xmaxqdepth=16 qlport_down_retry=10 ql2xloginretrycount=30 ql2xextended_error_logging=1 I get plenty of messages I do not understand, but it contains matching WWPN's of the fabric: [ 1050.235686] qla2xxx [0000:01:00.0]-28d9:2: Async-gnlist WWPN 22:09:00:0a:33:0c:45:d6 [ 1050.235688] qla2xxx [0000:01:00.0]-28da:2: Async-gnlist - OUT WWPN 22:09:00:0a:33:0c:45:d6 hndl 0 [ 1050.235692] qla2xxx [0000:01:00.0]-28d9:2: Async-gnlist WWPN 22:09:00:0a:33:0c:47:4c [ 1050.235693] qla2xxx [0000:01:00.0]-28d9:2: Async-gnlist WWPN 22:09:00:0a:33:0c:46:e5 [ 1050.235694] qla2xxx [0000:01:00.0]-28d9:2: Async-gnlist WWPN 22:0d:00:0a:33:48:14:36 [ 1050.235695] qla2xxx [0000:01:00.0]-28d9:2: Async-gnlist WWPN 22:09:00:0a:33:0c:47:3b [and many more] I uploaded the dmesg output from rmmod && modprobe: https://www.swabian.net/extern/opensuse/fcdmesg.txt some information about used firm/software: HBA (shown on boot): HPAE312A PCI Fibre Channel ROM BIOS Version 3.29 Subsystem Vendor ID 103C Copyright (C) QLogic Corporation 1993-20 Firmware Version 8.01.02 Switch:
version Kernel: 2.4.19 Fabric OS: v5.1.0b Made on: Fri May 26 23:48:35 2006 Flash: Sun Dec 3 12:44:30 2006 BootProm: 4.5.3
Switch
zoneinfo [...] Effective configuration: cfg: testzoning zone: fc_zone1 22:08:00:0a:33:0c:45:b4 22:08:00:0a:33:0c:45:d5 22:08:00:0a:33:0c:45:d6 22:08:00:0a:33:0c:45:dd 22:08:00:0a:33:0c:45:de 22:08:00:0a:33:0c:45:e1 22:08:00:0a:33:0c:46:e2 22:08:00:0a:33:0c:46:e5 22:08:00:0a:33:0c:47:3b 22:08:00:0a:33:0c:47:49 22:08:00:0a:33:0c:47:4c 22:08:00:0a:33:12:62:aa 22:08:00:0a:33:12:64:33 22:08:00:0a:33:12:64:3f 22:0c:00:0a:33:48:14:36 22:0c:00:0a:33:48:14:37 50:01:43:80:04:c5:9e:55 50:01:43:80:04:c5:9e:57 22:0a:00:0a:33:0c:45:d5 22:09:00:0a:33:0c:45:d5 22:0a:00:0a:33:0c:45:b4 22:09:00:0a:33:0c:45:b4 22:09:00:0a:33:0c:45:d6 22:0a:00:0a:33:0c:45:d6 22:09:00:0a:33:0c:45:dd 22:0a:00:0a:33:0c:45:dd 22:0a:00:0a:33:0c:45:de 22:09:00:0a:33:0c:45:de 22:0a:00:0a:33:0c:45:e1 22:09:00:0a:33:0c:45:e1 22:0a:00:0a:33:0c:46:e2 22:09:00:0a:33:0c:46:e2 22:09:00:0a:33:0c:46:e5 22:0a:00:0a:33:0c:46:e5 22:0a:00:0a:33:0c:47:3b 22:09:00:0a:33:0c:47:3b 22:0a:00:0a:33:0c:47:49 22:09:00:0a:33:0c:47:49 22:0a:00:0a:33:0c:47:4c 22:09:00:0a:33:0c:47:4c 22:0a:00:0a:33:12:62:aa 22:09:00:0a:33:12:62:aa 22:09:00:0a:33:12:64:33 22:0a:00:0a:33:12:64:33 22:09:00:0a:33:12:64:3f 22:0a:00:0a:33:12:64:3f 22:0d:00:0a:33:48:14:36 22:0e:00:0a:33:48:14:36 22:0d:00:0a:33:48:14:37 22:0e:00:0a:33:48:14:37 50:01:43:80:04:c5:9e:54 50:01:43:80:04:c5:9e:56 1,16 1,17 1,18 1,19
switchShow switchName: fcsw1 switchType: 34.0 switchState: Online switchMode: Native switchRole: Principal switchDomain: 1 switchId: fffc01 switchWwn: 10:00:00:05:1e:03:d8:ae zoning: ON (testzoning) switchBeacon: OFF
Area Port Media Speed State ============================== 16 0 id N2 Online L-Port 9 public, 7 private 17 1 id N2 Online L-Port 6 public, 10 private 18 2 id N4 Online F-Port 50:01:43:80:04:c5:9e:56 19 3 id N4 Online F-Port 50:01:43:80:04:c5:9e:54 20 4 id N4 No_Light 21 5 id N4 No_Light 22 6 id N4 No_Light 23 7 id N4 No_Light 24 8 id N4 No_Light 25 9 id N4 No_Light 26 10 id N4 No_Light 27 11 id 2G No_Light 28 12 id N4 No_Light 29 13 id N4 No_Light 30 14 id N4 No_Light 31 15 id N4 No_Light Thank you and regards, Paul -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org