Here is output: /dev/hdc: Model=Maxtor 91080D5, FwRev=GAS54112, SerialNo=A506Y69C Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=29 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=21095424 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4 * signifies the current active mode /dev/hdc: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 20928/16/63, sectors = 21095424, start = 0 On 9/11/05, Cristian Rodriguez <judas_iscariote@imapmail.org> wrote:
maybe an IDE performance problem what reports:
hdparm -i /dev/hda
hdparm /dev/hda
(if disk is IDE)
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org