Hi, I've unsuccessfully tried to install SuSE 9.3 on an IBM x345 server. After the packages were installed and SuSE made a reboot, the machine hangs with the message: "Kernel (hd0,0)/vmlinuz root=/dev/sda3 vga=0x317 selinux=0 acpi=off resume=/dev/sda2 splash=silent [ Linux bzImage, setup=0x1600, size=0x17685b ]" No other kernel messages, nothing. My hardware: IBM x345 (2CPUs) with IBM ServeRAID 5i (1 RAID5 array) Partitions: /dev/sda1 /boot (ext2) /dev/sda2 swap /dev/sda3 / (reiserfs) Bootloader: GRUB 1. I start the rescue system from the dvd and could access the partitions (rw). 2. I started a "new installation", then cancel the installation and then boot installed system. The system comes up without any errors, so I could finish the installation. 3. I already tried the smp, bigsmp and the default kernel with same result; guess the problem is not the kernel rather the bootloader or the initrd. 4. I also "reconfigured" the initrd (registered scsi or/and raid modules in /etc/sysconfig/kernel and started mkinitrd) which brought however nothing. 5. I run for at least 6 months on identically constructed servers SuSE 9,0 (2.4.21), 9,1 (2.6.5) and 9,2 (2.6.8) without any problems. I'm a newbie so I'm out of ideas. Thanks in advance Dan P.S. Sorry about my English.