On Thu, 22 Mar 2001, Timothy R. Butler said:
Hi John, Thanks for the reply! After I received your tip, I booted up my laptop to see what I could find. Here is the output of /sbin/dump_cis:
---OUTPUT--- Socket 0: manfid 0x13d1, 0xab02 funcid network_adapter [post] lan_technology ethernet lan_speed 10 mb/sec lan_speed 100 mb/sec lan_media unshielded_twisted_pair vers_1 5.0, "Linksys", "EtherFast Integrated 10/100 CardBus PC Card(PCM200)", "V1.0", "" config_cb base 0x002a last_index 0x01 BAR 1 size 256b [io] BAR 2 size 256b [mem] BAR 7 size 512b [mem] cftable_entry_cb 0x01 [default] Vcc Vnom 3300mV io_base 1
Disclaimer: I'm no expert at this. The following is just my educated guess. Is that the entire output? If so it would appear to me that you may be out of luck. Here's the output from one of my cards. Notice that it contains info about io and irq under the heading "cftable_entry 0x27 [default]" as in the two lines copied here: io 0x02e8-0x02ef [lines=10] [8bit] [16bit] [range] irq mask 0x8ebc [level] [pulse] [shared] ------------------------------------------------------ The dump_cis info is here:
dump_cis
Socket 0: no CIS present Socket 1: dev_info no_info attr_dev_info no_info vers_1 5.0, "Xircom", "CreditCard Ethernet 10/100 + Modem 56", "CEM56", "1.00" manfid 0x0105, 0x110a config base 0xff80 mask 0x0067 last_index 0x3f cftable_entry 0x27 [default] [rdybsy] [mwait] [pwrdown] Vcc Vnom 5V Vmin 4500mV Vmax 5500mV Istatic 450mA timing wait 12ms ready 12ms io 0x02e8-0x02ef [lines=10] [8bit] [16bit] [range] irq mask 0x8ebc [level] [pulse] [shared] cftable_entry 0x1f io 0x03e8-0x03ef [lines=10] [8bit] [16bit] [range] cftable_entry 0x17 io 0x02f8-0x02ff [lines=10] [8bit] [16bit] [range] cftable_entry 0x0f io 0x03f8-0x03ff [lines=10] [8bit] [16bit] [range] cftable_entry 0x3f io 0x0000-0x0007 [lines=3] [8bit] [16bit] funcid serial_port serial_interface uart 16550 [space/mark/odd/even] [7/8] [1/2] serial_data_services data_rate 115200 modulation [Bell103] [V.21] [V.23] [V.22] [Bell212A] [V.22bis] [V.32] [V.32bis] [V.34] error_control [MNP2-4] [V.42/LAPM] compression [V.42bis] [MNP5] cmd_protocol [AT1] [AT2] [AT3] [MNP_AT] serial_fax_services [class=1] data_rate 115200 modulation [V.21-C2] [V.27ter] [V.17] features [T.4] funcid network_adapter lan_node_id 00 10 a4 d1 62 c1 ---------------------------------------------------------------------- John Karns jkarns@csd.net