On Tue, 1 Jun 2004 08:52, Terry Eck wrote:
I have run several programs under SuSE 9.1 using KDE. Programs with sound: KsCD: Plays CD's no problem. Grip: Played CD's and ripped ogg files. (system froze when I was running kdetv with grip, keyboard lock, had to reboot) Jux: plays fine using the ripped ogg files. xmms: works great. Frozen Bubble: works with sound.
The only program which does not provide sound so far is kdetv.
When entering KDE there is no sound announcement but leaving KDE there is a sound announcement.
Also, The following is taken from dmesg for both SuSE 9.1 and 8.2
SuSE 9.1---------------- bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: \ tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300, ... tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) \ by bt878 #0 [sw]
SuSE 8.2---------------- bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: \ tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300, ... tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) --------------------------
If you have both SuSE 8.2 & 9.1 available compare the modules.conf and modprobe.conf. You should see something similar to this in both. options bttv card=37 gbuffers=4 pll=1 radio=1 tuner=5 Just alter SuSE 9.1 modprobe.conf to what is set in modules.conf. The two options you may need to change are the "pll" and "tuner". From memory I had trouble many years ago with the wrong setting for "pll" which caused the sound problem. Then again I have a different card and TV standards to you. -- Regards, Graham Smith ---------------------------------------------------------