-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all:
I am trying to get my DVD and CDRW working. Both are ide type's on the second
ide controller/channel. The DVD is master and the CDRW is slave or secondary.
Both were detected by Yast2 during install, but it did not install ide-scsi
emulation. I have followed the Configuration manual chapter 11 as best as I
could (limited knowledge) and even talked to tech support. I have ide-scsi
emulation set and working for both, but now the DVD does not read disks, and
the CDRW is reading disks as cdrom but not writing disks, even though Koncd
see the writer. I am not sure if I needed to set scsi emulation for the DVD?
My main function for the DVD is install software cd's, and play music cd's
and to retrive data from data cd's. My main needed for the CDRW is to make
back up's and create data cd's from the hard drive. I think this is a
linkage problem. Can some one please help. I am enculding the boot.local,
fstab, mtab, liloconf, lsmod, and cdrecord -scanbus files:
boot.local#! /bin/sh
#
# Copyright (c) 1996 SuSE GmbH Nuernberg, Germany. All rights reserved.
#
# Author: Werner Fink , 1996
# Burchard Steinbild , 1996
#
# /etc/init.d/boot.local
#
# script with local commands to be executed from init on system startup
#
. /etc/rc.config
#
# Here you should add things, that should happen directly after booting
# before we're going to the first run level.
#
/sbin/modprobe ide-scsi
ÿ
fstab:
/dev/hda3 / reiserfs defaults 1 1
/dev/hda1 /boot reiserfs defaults 1 2
/dev/cdrecorder /cdrecorder auto ro,noauto,user,exec 0 0
/dev/cdrom /cdrom auto ro,noauto,user,exec 0 0
devpts /dev/pts devpts defaults 0 0
/dev/dvd /dvd auto ro,noauto,user,exec 0 0
/dev/fd0 /floppy auto noauto,user 0 0
proc /proc proc defaults 0 0
/dev/hda2 swap swap defaults 0 2
mtab:
/dev/hda3 / reiserfs rw 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw,mode=0620,gid=5 0 0
/dev/hda1 /boot reiserfs rw 0 0
/proc/bus/usb /proc/bus/usb usbdevfs rw 0 0
/dev/scd0 /cdrom iso9660 ro,nosuid,nodev,user=ralph 0 0
liloconf:
append=[hdc=ide-scsi hdd=ide-scsi]
boot = /dev/hda
vga = normal
read-only
menu-scheme = Wg:kw:Wg:Wg
prompt
timeout = 80
message = /boot/message
image = /boot/vmlinuz
label = linux
root = /dev/hda3
initrd = /boot/initrd
image = /boot/vmlinuz.suse
label = suse
root = /dev/hda3
initrd = /boot/initrd.suse
optional
image = /boot/memtest.bin
label = memtest86
sVØüA
lsmod:
root@kitty:/home/ralph > lsmod
Module Size Used by
ipv6 100080 -1 (autoclean)
ppp 21232 2 (autoclean)
slhc 4448 0 (autoclean) [ppp]
mssclampfw 1872 0 (unused)
pppox 5680 1 (autoclean)
sg 12640 0 (autoclean)
snd-pcm-oss 18288 0 (autoclean)
snd-pcm-plugin 14032 0 (autoclean) [snd-pcm-oss]
snd-mixer-oss 4544 0 (autoclean) [snd-pcm-oss]
tdfx 51344 3 (initializing)
mousedev 3856 0 (unused)
hid 11680 0 (unused)
input 2880 0 [mousedev hid]
usb-uhci 19056 0 (unused)
rtl8139 12256 1 (autoclean)
snd-seq-midi 4144 0 (unused)
snd-seq-midi-event 2896 0 [snd-seq-midi]
snd-seq 42912 0 [snd-seq-midi snd-seq-midi-event]
snd-card-emu10k1 2320 1
snd-emu10k1 24720 0 [snd-card-emu10k1]
snd-pcm 35296 0 [snd-pcm-oss snd-pcm-plugin snd-emu10k1]
snd-timer 10688 0 [snd-seq snd-pcm]
snd-emux-mem 1936 0 [snd-emu10k1]
snd-rawmidi 10624 0 [snd-seq-midi snd-emu10k1]
snd-ac97-codec 27168 0 [snd-emu10k1]
snd-mixer 28624 1 [snd-mixer-oss snd-emu10k1 snd-ac97-codec]
snd-seq-device 4080 0 [snd-seq-midi snd-seq snd-card-emu10k1
snd-rawmidi]
snd 43632 4 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss
snd-seq-midi snd-seq-midi-event snd-seq snd-card-emu10k1 snd-emu10k1 snd-pcm
snd-timer snd-emux-mem snd-rawmidi snd-ac97-codec snd-mixer snd-seq-device]
soundcore 2576 5 [snd]
ide-scsi 7600 0
usbcore 45104 1 [hid usb-uhci]
cdrecord -scanbus:
root@kitty:/home/ralph > cdrecord -scanbus
Cdrecord 1.9 (i686-suse-linux) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'RICOH ' 'MP6200A ' '2.20' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Thank you for your help.
Ralph
- --
It said uses Windows 98 or better so I installed SuSE 7.1
Proud user of SuSE 7.1 Professional
Register Linux User 168814 ICQ #49993234
GPG Public Key available at http://www.keyserver.net
Key fingerprint = 6426 1CFF 0987 9D51 76D6 06BC F22A CFF4 559A 03E7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.4 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE6swHy8irP9FWaA+cRApaUAKCivC+s8GOQzdfFwi6emUDXL0HfuwCfW6LR
x3DXGPOmRxdIVbstb9TkCzI=
=oKRh
-----END PGP SIGNATURE-----
