Hi All Im setting up a new machine and trying wvdial. When I run it it detects the modem and provides the init string but ends up with a segmentation fault (and dosent create the conf file) I create the wvdial.conf by hand using the init string provided by the wvdialconf but when I run wvdial it says "bad init string" also... if I querry the modem in kpp it says the modem is busy minicom dosnt dial, so the modems not getting dected? Bascially if I change any of the jumpers on the card wvdial doesnt detect it I have the modem jumpers set on com1 irq 4 wvdial says its on ttyS0 (which is com 1??????) the bios setting for irq 4 is 3E8 - 3EF =irq4 and 3F8 - 3FF =irq4 Im really at my wits end with this and I'd greatly appreciate any help thanks rob -- Bookmarks <A HREF="http://www.connix.com/~dizzy73/LBM.htm"><A HREF="http://www.connix.com/~dizzy73/LBM.htm</A">http://www.connix.com/~dizzy73/LBM.htm</A</A>> - To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e Check out the SuSE-FAQ at <A HREF="http://www.suse.com/Support/Doku/FAQ/"><A HREF="http://www.suse.com/Support/Doku/FAQ/</A">http://www.suse.com/Support/Doku/FAQ/</A</A>> and the archiv at <A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html"><A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html</A">http://www.suse.com/Mailinglists/suse-linux-e/index.html</A</A>>