Dear all, I got terrible problem, my production machine crashed after runs 12 hours. Below the last messages from /var/log/boot.msg It is OpenSuSE 11.1 running with Intel DG43NB + E7500 HDD Seagate Model=ST3250310NS (ES Type) 1 GB of RAM non-ECC Dlink (Realtek 8138too) Intel e1000e (onboard) 3Com 3c590 FYI, this box setting off HDD is Native IDE (not AHCI) I also have another box that run similar specification (set as AHCI, no 3C590) that run very well for more than a week. Need advise and suggest from experts here. Thank you very much for your kind help Best Regards, Wong ---snip--- <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 <6>ACPI: Power Button [PWRF] <6>8139too Fast Ethernet driver 0.9.28 <6>8139too 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <6>eth0: RealTek RTL8139 at 0xf85d8000, 00:24:01:eb:76:ec, IRQ 20 <6>3c59x 0000:04:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <6>3c59x: Donald Becker and others. <6>0000:04:04.0: 3Com PCI 3c590 Vortex 10Mbps at 0001d100. <6>0000:04:04.0: Overriding PCI latency timer (CFLT) setting of 32, new value is 248. <4>Driver 'rtc_cmos' needs updating - please use bus_type methods <6>rtc_cmos 00:06: RTC can wake from S4 <6>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs <6>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <3>ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] <6>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver <6>Adding 1044216k swap on /dev/sda1. Priority:-1 extents:1 across:1044216k <6>loop: module loaded Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sat Dec 26 19:22:48 2009 Waiting for device /dev/disk/by-id/ata-ST3250310NS_9SF14QXY-part2 to appear: ok showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/disk/by-id/ata-ST3250310NS_9SF14QXY-part2 Reiserfs super block in block 16 on 0x802 of format 3.6 with standard journal Blocks (total/free): 10484416/9994120 by 4096 bytes Filesystem is NOT clean Replaying journal: Trans replayed: mountid 37, transid 20616, desc 4985, len 79, commit 5065, next trans offset 5048 Replaying journal: | | 0.3% 1 trans Trans replayed: mountid 37, transid 20617, desc 5066, len 37, commit 5104, next trans offset 5087 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org