Megnéztem a boot.msg-t. Remélem mond valamit valakinek! A következő volt benne: <6>[ 3.067309] udev: starting version 146 <6>[ 3.094274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <4>[ 3.094726] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 <6>[ 3.094733] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 <7>[ 3.094755] ehci_hcd 0000:00:1d.7: setting latency timer to 64 <6>[ 3.094760] ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>[ 3.094800] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>[ 3.098730] ehci_hcd 0000:00:1d.7: debug port 1 <7>[ 3.098738] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported <6>[ 3.098752] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf0000000 <6>[ 3.172781] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>[ 3.172848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 3.172853] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.172857] usb usb1: Product: EHCI Host Controller <6>[ 3.172860] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-default ehci_hcd <6>[ 3.172863] usb usb1: SerialNumber: 0000:00:1d.7 <6>[ 3.172996] usb usb1: configuration #1 chosen from 1 choice <6>[ 3.173038] hub 1-0:1.0: USB hub found <6>[ 3.173050] hub 1-0:1.0: 6 ports detected <6>[ 3.178282] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 <6>[ 3.178305] rtc0: alarms up to one month, 242 bytes nvram <6>[ 3.211957] uhci_hcd: USB Universal Host Controller Interface driver <6>[ 3.212068] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 <7>[ 3.212081] uhci_hcd 0000:00:1d.0: setting latency timer to 64 <6>[ 3.212086] uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>[ 3.212104] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>[ 3.212135] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e000 <6>[ 3.212189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 3.212193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.212197] usb usb2: Product: UHCI Host Controller <6>[ 3.212200] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd <6>[ 3.212203] usb usb2: SerialNumber: 0000:00:1d.0 <6>[ 3.212318] usb usb2: configuration #1 chosen from 1 choice <6>[ 3.212361] hub 2-0:1.0: USB hub found <6>[ 3.212371] hub 2-0:1.0: 2 ports detected <4>[ 3.214342] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 <6>[ 3.214349] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 <7>[ 3.214360] uhci_hcd 0000:00:1d.1: setting latency timer to 64 <6>[ 3.214364] uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>[ 3.214379] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>[ 3.214405] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e120 <6>[ 3.214448] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 3.214452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.214455] usb usb3: Product: UHCI Host Controller <6>[ 3.214458] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd <6>[ 3.214461] usb usb3: SerialNumber: 0000:00:1d.1 <6>[ 3.214547] usb usb3: configuration #1 chosen from 1 choice <6>[ 3.214584] hub 3-0:1.0: USB hub found <6>[ 3.214593] hub 3-0:1.0: 2 ports detected <6>[ 3.214653] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 <7>[ 3.214660] uhci_hcd 0000:00:1d.2: setting latency timer to 64 <6>[ 3.214664] uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>[ 3.214673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>[ 3.214695] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e240 <6>[ 3.214732] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 3.214736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.214740] usb usb4: Product: UHCI Host Controller <6>[ 3.214743] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-default uhci_hcd <6>[ 3.214746] usb usb4: SerialNumber: 0000:00:1d.2 <6>[ 3.214827] usb usb4: configuration #1 chosen from 1 choice <6>[ 3.214862] hub 4-0:1.0: USB hub found <6>[ 3.214870] hub 4-0:1.0: 2 ports detected <6>[ 3.724039] usb 3-1: new low speed USB device using uhci_hcd and address 2 <6>[ 3.908345] usb 3-1: New USB device found, idVendor=0458, idProduct=002c <6>[ 3.908351] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 3.908355] usb 3-1: Product: Wireless TwinTouch Optical Office <6>[ 3.908358] usb 3-1: Manufacturer: KYE SYSTEMS CORP. <6>[ 3.908495] usb 3-1: configuration #1 chosen from 1 choice <6>[ 3.944831] usbcore: registered new interface driver hiddev <6>[ 3.958797] input: KYE SYSTEMS CORP. Wireless TwinTouch Optical Office as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 <6>[ 3.958907] generic-usb 0003:0458:002C.0001: input,hidraw0: USB HID v1.00 Keyboard [KYE SYSTEMS CORP. Wireless TwinTouch Optical Office] on usb-0000:00:1d.1-1/input0 <6>[ 3.985155] input: KYE SYSTEMS CORP. Wireless TwinTouch Optical Office as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 <6>[ 3.985251] generic-usb 0003:0458:002C.0002: input,hidraw1: USB HID v1.00 Mouse [KYE SYSTEMS CORP. Wireless TwinTouch Optical Office] on usb-0000:00:1d.1-1/input1 <6>[ 3.985268] usbcore: registered new interface driver usbhid <6>[ 3.985272] usbhid: v2.6:USB HID core driver <6>[ 4.180035] usb 3-2: new low speed USB device using uhci_hcd and address 3 <6>[ 4.349276] usb 3-2: New USB device found, idVendor=093a, idProduct=2510 <6>[ 4.349280] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 4.349284] usb 3-2: Product: USB OPTICAL MOUSE <6>[ 4.349287] usb 3-2: Manufacturer: PIXART <6>[ 4.349403] usb 3-2: configuration #1 chosen from 1 choice <6>[ 4.376759] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 <6>[ 4.376858] generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0 <7>[ 4.600723] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 <7>[ 4.600728] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 2009. 12. 1, kedd keltezéssel 20.33-kor Burján Ferenc ezt írta:
Sziasztok!
Lehet, hogy vissza kell tennem a 11.1-et? Nem működik az USB pendrive. Már a 11.0 és a 11.1-ben is csak akkor működött, ha a bootnál már be volt dugva. Erre vártam a megoldást a 11.2-től. Valóban kaptam megoldást. Mintha az volna a filozófiája, hogy ami nincs azzal nem is gyűlik meg az ember baja. :-(
Vagy? .... tud valaki megoldást? Van USB-s billentyűm, egerem, csak USB-s tárolóm nincsen.
11.2-ben az lsusb műsora:
Pendrive előtt:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0458:002c KYE Systems Corp. (Mouse Systems) Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Pendrive után: :-(
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0458:002c KYE Systems Corp. (Mouse Systems) Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Azaz tök ugyan az. Az egyetlen változás, hogy a Pendrive vég nélkül villog a csatlakozóban. Egész jól mutat a bedugott billenytűzet és egér mellett.
B. Feri
Szia Ervin! Köszi, hogy segíteni próbálsz. Már azt hittem senkinek semmi ötlete. Az lsmod kimenete: Module Size Used by nfs 345360 0 lockd 81484 1 nfs fscache 46552 1 nfs nfs_acl 3264 1 nfs auth_rpcgss 43360 1 nfs sunrpc 225536 5 nfs,lockd,nfs_acl,auth_rpcgss michael_mic 2656 12 arc4 1952 6 ecb 3264 6 cryptomgr 95216 0 aead 8640 1 cryptomgr pcompress 2752 1 cryptomgr crypto_blkcipher 14884 2 ecb,cryptomgr crypto_hash 14464 2 michael_mic,cryptomgr crypto_algapi 21220 7 arc4,ecb,cryptomgr,aead,pcompress,crypto_blkcipher,crypto_hash lib80211_crypt_tkip 9792 3 af_packet 23648 4 ip6t_LOG 6500 6 xt_tcpudp 3136 2 xt_pkttype 1632 3 ipt_LOG 6308 6 xt_limit 2628 12 nls_utf8 1856 1 snd_pcm_oss 51648 0 snd_mixer_oss 18464 1 snd_pcm_oss snd_seq 64752 0 snd_seq_device 8556 1 snd_seq edd 10376 0 cpufreq_conservative 8396 0 cpufreq_userspace 3332 0 cpufreq_powersave 1568 0 acpi_cpufreq 9196 0 speedstep_lib 5092 0 radeon 367968 3 drm 184096 4 radeon i2c_core 32308 1 drm ip6t_REJECT 5472 3 nf_conntrack_ipv6 22100 4 ip6table_raw 3008 1 xt_NOTRACK 1632 4 ipt_REJECT 3168 3 xt_state 2208 8 iptable_raw 2848 1 iptable_filter 3616 1 ip6table_mangle 4160 0 nf_conntrack_netbios_ns 2432 0 nf_conntrack_ipv4 11688 4 nf_conntrack 84508 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4 nf_defrag_ipv4 2112 1 nf_conntrack_ipv4 ip_tables 13520 2 iptable_raw,iptable_filter ip6table_filter 3616 1 ip6_tables 14960 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter x_tables 19140 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables ipv6 306036 21 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle nls_iso8859_1 4000 1 nls_cp437 5664 1 vfat 12320 1 fat 59264 1 vfat fuse 75868 5 loop 17324 0 dm_mod 84740 0 pcmcia 42152 0 ohci1394 32880 0 snd_intel8x0 35068 3 snd_intel8x0m 16684 0 snd_ac97_codec 119364 2 snd_intel8x0,snd_intel8x0m ac97_bus 1920 1 snd_ac97_codec ipw2200 193740 0 joydev 11712 0 sr_mod 17316 1 cdrom 40448 1 sr_mod serio_raw 6180 0 yenta_socket 41196 2 rsrc_nonstatic 13664 1 yenta_socket pcmcia_core 40660 3 pcmcia,yenta_socket,rsrc_nonstatic ieee1394 102308 1 ohci1394 r8169 38244 0 libipw 45936 1 ipw2200 lib80211 7460 3 lib80211_crypt_tkip,ipw2200,libipw snd_pcm 97444 5 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec snd_timer 27176 2 snd_seq,snd_pcm snd 75076 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer soundcore 9120 1 snd snd_page_alloc 10248 3 snd_intel8x0,snd_intel8x0m,snd_pcm pcspkr 2784 0 sg 32660 0 iTCO_wdt 12452 0 iTCO_vendor_support 3876 1 iTCO_wdt shpchp 36372 0 pci_hotplug 32928 1 shpchp irda 145016 0 crc_ccitt 1984 1 irda button 6544 0 battery 12772 0 ac 4900 0 intel_agp 30812 1 ext4 360324 1 jbd2 96096 1 ext4 crc16 1952 1 ext4 usbhid 51968 0 hid 46848 1 usbhid rtc_cmos 15280 0 uhci_hcd 29552 0 rtc_core 22908 1 rtc_cmos rtc_lib 3168 1 rtc_core ehci_hcd 56432 0 fan 5028 0 processor 50352 2 acpi_cpufreq ide_pci_generic 4036 0 piix 6792 0 ide_core 124108 2 ide_pci_generic,piix ata_generic 4868 0 ata_piix 25288 6 ahci 39280 0 libata 200748 3 ata_generic,ata_piix,ahci thermal 21020 0 thermal_sys 18120 3 fan,processor,thermal hwmon 3676 1 thermal_sys B. Feri 2009. 12. 8, kedd keltezéssel 12.50-kor Ervin Novak ezt írta:
Szia
~# udevadm monitor <pendrive berak>
kimenetét küld el légyszi. Meg egy lsmod-ot.
Ervin
BurjánFerenc <feri.bp@vnet.hu> 12/1/2009 9:24 PM >>>
Megnéztem a boot.msg-t. Remélem mond valamit valakinek! A következő volt benne:
participants (2)
-
Burján Ferenc -
Ervin Novak