2011-06-30 20:09 keltezéssel, Horváth István írta:
Szágyi Károly írta:
Sziasztot !
Adott ez a szkenner. A Sane támogatja,benne van a driver listában az lsusb látja a szkennert A yast > szkenner driver beállítás telepíti a drivert de nem talál hozzá szkennert ami egyébként ott van a listában.
Ah HP setup semmit nem tud csinálni vele, utána néztem A HP setupnak be kell tudni állítani ezt az eszközt.
Windowson működik :)
Szóval most passz, esetleg valaki használ ilyen eszközt, vagy van tapasztalat HP szkenner ügyben. Köszönöm, ha tudtok segíteni.
Szerintem ebből HAL és UDEV konfigfájlok kézi tákolása lesz, attól meg szokott oldódni az ilyen hiba. (Pontosabbat sajnos nem tudok írni erre a modellre... dmesg és lsusb kimenetet tudsz küldeni?)
openSUSE 11.4 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670 __________________ dmesg Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670 apa@suseapa:~> dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-0.5-default (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-04-25 21:48:33 +0200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff40000 (usable) [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: P4i65G/P4i65G, BIOS P1.40 07/31/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7ff40 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000 [ 0.000000] RAMDISK: 374d2000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 369b4000 - 374d132e [ 0.000000] Move RAMDISK from 00000000374d2000 - 0000000037fef32d to 369b4000 - 374d132d [ 0.000000] ACPI: RSDP 000fa570 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7ff40000 00030 (v01 A M I OEMRSDT 07000731 MSFT 00000097) [ 0.000000] ACPI: FACP 7ff40200 00081 (v02 A M I OEMFACP 07000731 MSFT 00000097) [ 0.000000] ACPI: DSDT 7ff40370 03B3B (v01 P4i6G P4i6G133 00000133 INTL 02002026) [ 0.000000] ACPI: FACS 7ff50000 00040 [ 0.000000] ACPI: APIC 7ff40300 0006C (v01 A M I OEMAPIC 07000731 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ff50040 0003F (v01 A M I OEMBIOS 07000731 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ff40 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ff40 [ 0.000000] On node 0 totalpages: 523983 [ 0.000000] free_area_init_node: node 0, pgdat c0902c00, node_mem_map f59b4200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2319 pages used for memmap [ 0.000000] HighMem zone: 294451 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s27264 r0 d21888 u1048576 [ 0.000000] pcpu-alloc: s27264 r0 d21888 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519888 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part2 resume=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part1 splash=silent quiet vga=0x31a [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10481600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff40) [ 0.000000] Memory: 2048176k/2096384k available (4109k kernel code, 47756k reserved, 3127k data, 428k init, 1187080k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0912000 - 0xc097d000 ( 428 kB) [ 0.000000] .data : 0xc0603783 - 0xc0911708 (3127 kB) [ 0.000000] .text : 0xc0200000 - 0xc0603783 (4109 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.925 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.85 BogoMIPS (lpj=11999700) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004066] Security Framework initialized [ 0.004090] AppArmor: AppArmor initialized [ 0.004163] Mount-cache hash table entries: 512 [ 0.004319] Initializing cgroup subsys ns [ 0.004324] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004328] Initializing cgroup subsys cpuacct [ 0.004334] Initializing cgroup subsys memory [ 0.004347] Initializing cgroup subsys devices [ 0.004350] Initializing cgroup subsys freezer [ 0.004353] Initializing cgroup subsys net_cls [ 0.004356] Initializing cgroup subsys blkio [ 0.004404] CPU: Physical Processor ID: 0 [ 0.004407] CPU: Processor Core ID: 0 [ 0.004410] mce: CPU supports 4 MCE banks [ 0.004423] CPU0: Thermal monitoring enabled (TM1) [ 0.004428] using mwait in idle threads. [ 0.004438] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.004449] ... version: 0 [ 0.004451] ... bit width: 40 [ 0.004453] ... generic registers: 18 [ 0.004455] ... value mask: 000000ffffffffff [ 0.004457] ... max period: 0000007fffffffff [ 0.004459] ... fixed-purpose events: 0 [ 0.004461] ... event mask: 000000000003ffff [ 0.005117] ACPI: Core revision 20101013 [ 0.013558] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.013854] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053548] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 0.056000] NMI watchdog enabled, takes one hw-pmu counter. [ 0.056000] CPU 1 irqstacks, hard=f44a2000 soft=f44a4000 [ 0.056000] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.148040] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148095] Brought up 2 CPUs [ 0.148101] Total of 2 processors activated (11999.62 BogoMIPS). [ 0.148465] devtmpfs: initialized [ 0.148465] regulator: core version 0.5 [ 0.148465] regulator: dummy: [ 0.148465] Time: 18:57:26 Date: 06/30/11 [ 0.148465] NET: Registered protocol family 16 [ 0.148623] ACPI: bus type pci registered [ 0.148767] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.148770] PCI: Using configuration type 1 for base access [ 0.149779] bio: create slab <bio-0> at 0 [ 0.152596] ACPI: EC: Look up EC in DSDT [ 0.154656] ACPI: Executed 1 blocks of module-level executable AML code [ 0.159318] ACPI: Interpreter enabled [ 0.159325] ACPI: (supports S0 S1 S3 S4 S5) [ 0.159361] ACPI: Using IOAPIC for interrupt routing [ 0.164395] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.165173] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.165425] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.165674] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.167631] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.170016] ACPI: No dock devices found. [ 0.170023] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.170190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.170541] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.170546] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.170550] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.170554] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffefffff] (ignored) [ 0.170573] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 [ 0.170579] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.170590] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.170654] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604 [ 0.170697] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 [ 0.170709] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.170795] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 0.170844] pci 0000:00:1d.0: reg 20: [io 0xe000-0xe01f] [ 0.170881] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 0.170929] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f] [ 0.170967] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 0.171015] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f] [ 0.171051] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 0.171099] pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f] [ 0.171149] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 0.171173] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff] [ 0.171261] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.171267] pci 0000:00:1d.7: PME# disabled [ 0.171286] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.171334] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 0.171404] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.171426] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 [ 0.171442] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.171453] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.171464] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.171475] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.171486] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.171498] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.171529] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 0.171544] pci 0000:00:1f.2: reg 10: [io 0xd400-0xd407] [ 0.171554] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] [ 0.171564] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] [ 0.171574] pci 0000:00:1f.2: reg 1c: [io 0xc800-0xc803] [ 0.171584] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc40f] [ 0.171618] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 [ 0.171667] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.171709] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 0.171726] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff] [ 0.171737] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc3f] [ 0.171747] pci 0000:00:1f.5: reg 18: [mem 0xfebff800-0xfebff9ff] [ 0.171758] pci 0000:00:1f.5: reg 1c: [mem 0xfebff400-0xfebff4ff] [ 0.171800] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.171805] pci 0000:00:1f.5: PME# disabled [ 0.171837] pci 0000:01:00.0: [10de:0326] type 0 class 0x000300 [ 0.171854] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.171864] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref] [ 0.171897] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.171955] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.171960] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.171965] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff] [ 0.171971] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xefdfffff pref] [ 0.172016] pci 0000:02:01.0: [109e:036e] type 0 class 0x000400 [ 0.172037] pci 0000:02:01.0: reg 10: [mem 0xefefe000-0xefefefff pref] [ 0.172130] pci 0000:02:01.1: [109e:0878] type 0 class 0x000480 [ 0.172151] pci 0000:02:01.1: reg 10: [mem 0xefeff000-0xefefffff pref] [ 0.172249] pci 0000:02:05.0: [10ec:8139] type 0 class 0x000200 [ 0.172268] pci 0000:02:05.0: reg 10: [io 0xb800-0xb8ff] [ 0.172279] pci 0000:02:05.0: reg 14: [mem 0xfeaffc00-0xfeaffcff] [ 0.172337] pci 0000:02:05.0: supports D1 D2 [ 0.172341] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold [ 0.172346] pci 0000:02:05.0: PME# disabled [ 0.172386] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.172391] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.172397] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.172402] pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefefffff pref] [ 0.172408] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.172412] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.172426] pci_bus 0000:00: on NUMA node 0 [ 0.172432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.172550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.182028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.182147] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.182263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.182378] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.182494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.182611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.182728] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.182844] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.182898] HEST: Table is not found! [ 0.183184] SCSI subsystem initialized [ 0.183285] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.183292] vgaarb: loaded [ 0.183323] PCI: Using ACPI for IRQ routing [ 0.183323] PCI: pci_cache_line_size set to 64 bytes [ 0.183323] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.183323] reserve RAM buffer: 000000007ff40000 - 000000007fffffff [ 0.183323] NetLabel: Initializing [ 0.183323] NetLabel: domain hash size = 128 [ 0.183323] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.183323] NetLabel: unlabeled traffic allowed by default [ 0.183323] hpet clockevent registered [ 0.183323] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.183323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.183323] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.188025] Switching to clocksource tsc [ 0.189903] AppArmor: AppArmor Filesystem Enabled [ 0.189920] pnp: PnP ACPI init [ 0.189953] ACPI: bus type pnp registered [ 0.190172] pnp 00:00: [bus 00-ff] [ 0.190177] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.190181] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.190184] pnp 00:00: [io 0x0d00-0xffff window] [ 0.190187] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.190190] pnp 00:00: [mem 0x00000000 window] [ 0.190194] pnp 00:00: [mem 0x80000000-0xffefffff window] [ 0.190276] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.190353] pnp 00:01: [dma 4] [ 0.190356] pnp 00:01: [io 0x0000-0x000f] [ 0.190359] pnp 00:01: [io 0x0081-0x0083] [ 0.190362] pnp 00:01: [io 0x0087] [ 0.190365] pnp 00:01: [io 0x0089-0x008b] [ 0.190368] pnp 00:01: [io 0x008f] [ 0.190370] pnp 00:01: [io 0x00c0-0x00df] [ 0.190426] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.190450] pnp 00:02: [io 0x0070-0x0071] [ 0.190466] pnp 00:02: [irq 8] [ 0.190519] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.190537] pnp 00:03: [io 0x0061] [ 0.190590] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.190608] pnp 00:04: [io 0x00f0-0x00ff] [ 0.190618] pnp 00:04: [irq 13] [ 0.190673] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.191621] pnp 00:05: [io 0x03f0-0x03f5] [ 0.191625] pnp 00:05: [io 0x03f7] [ 0.191631] pnp 00:05: [irq 6] [ 0.191635] pnp 00:05: [dma 2] [ 0.191735] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.192731] pnp 00:06: [io 0x0010-0x001f] [ 0.192735] pnp 00:06: [io 0x0022-0x003f] [ 0.192738] pnp 00:06: [io 0x0044-0x005f] [ 0.192741] pnp 00:06: [io 0x0062-0x0063] [ 0.192744] pnp 00:06: [io 0x0065-0x006f] [ 0.192747] pnp 00:06: [io 0x0072-0x007f] [ 0.192750] pnp 00:06: [io 0x0080] [ 0.192753] pnp 00:06: [io 0x0084-0x0086] [ 0.192755] pnp 00:06: [io 0x0088] [ 0.192758] pnp 00:06: [io 0x008c-0x008e] [ 0.192761] pnp 00:06: [io 0x0090-0x009f] [ 0.192764] pnp 00:06: [io 0x00a2-0x00bf] [ 0.192767] pnp 00:06: [io 0x00e0-0x00ef] [ 0.192770] pnp 00:06: [io 0x04d0-0x04d1] [ 0.192773] pnp 00:06: [io 0x0800-0x087f] [ 0.192776] pnp 00:06: [io 0x0000-0xffffffff disabled] [ 0.192779] pnp 00:06: [io 0x0480-0x04bf] [ 0.192783] pnp 00:06: [mem 0xfed20000-0xfed8ffff] [ 0.192786] pnp 00:06: [mem 0xff380000-0xffefffff] [ 0.192888] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193041] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.193045] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.193125] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.193186] pnp 00:08: [io 0x0060] [ 0.193190] pnp 00:08: [io 0x0064] [ 0.193197] pnp 00:08: [irq 1] [ 0.193257] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.193361] pnp 00:09: [irq 12] [ 0.193420] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.193836] pnp 00:0a: [io 0x0000-0xffffffff disabled] [ 0.193840] pnp 00:0a: [io 0x0680-0x06ff] [ 0.193843] pnp 00:0a: [io 0x0295-0x0296] [ 0.193925] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.194266] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.194271] pnp 00:0b: [mem 0x000c0000-0x000dffff] [ 0.194274] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.194278] pnp 00:0b: [mem 0x00100000-0x7fffffff] [ 0.194281] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.194372] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.194710] pnp: PnP ACPI: found 12 devices [ 0.194713] ACPI: ACPI bus type pnp unregistered [ 0.194718] PnPBIOS: Disabled by ACPI PNP [ 0.194737] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.194742] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.194746] system 00:06: [io 0x0480-0x04bf] has been reserved [ 0.194750] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.194754] system 00:06: [mem 0xff380000-0xffefffff] has been reserved [ 0.194763] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.194767] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.194776] system 00:0a: [io 0x0680-0x06ff] has been reserved [ 0.194780] system 00:0a: [io 0x0295-0x0296] has been reserved [ 0.194788] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.194793] system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.194797] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.194801] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.194805] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.232675] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] [ 0.232684] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) [ 0.232689] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.232692] pci 0000:00:01.0: bridge window [io disabled] [ 0.232698] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff] [ 0.232703] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xefdfffff pref] [ 0.232711] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.232715] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.232722] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.232727] pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefefffff pref] [ 0.232749] pci 0000:00:1e.0: setting latency timer to 64 [ 0.232754] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.232758] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.232761] pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfe9fffff] [ 0.232765] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xefdfffff pref] [ 0.232769] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.232772] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.232775] pci_bus 0000:02: resource 2 [mem 0xefe00000-0xefefffff pref] [ 0.232778] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.232781] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.232863] NET: Registered protocol family 2 [ 0.232975] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.233397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.233959] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.234393] TCP: Hash tables configured (established 131072 bind 65536) [ 0.234396] TCP reno registered [ 0.234401] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.234418] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.234634] NET: Registered protocol family 1 [ 0.234784] pci 0000:01:00.0: Boot video device [ 0.234798] PCI: CLS 0 bytes, default 64 [ 0.234884] Unpacking initramfs... [ 0.563407] Freeing initrd memory: 11384k freed [ 0.573413] audit: initializing netlink socket (disabled) [ 0.573439] type=2000 audit(1309460245.568:1): initialized [ 0.590082] highmem bounce pool size: 64 pages [ 0.590091] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.590331] VFS: Disk quotas dquot_6.5.2 [ 0.590381] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.590546] msgmni has been set to 426 [ 0.590824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.590863] io scheduler noop registered [ 0.590868] io scheduler deadline registered [ 0.590893] io scheduler cfq registered (default) [ 0.592234] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 5120k, total 131072k [ 0.592238] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.592241] vesafb: protected mode interface info at c000:dcd0 [ 0.592244] vesafb: pmi: set display start = c00cdd06, set palette = c00cdd70 [ 0.592246] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.592269] vesafb: scrolling: redraw [ 0.592273] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.592898] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.592905] bootsplash: silentjpeg size 245922 bytes [ 0.621130] bootsplash: ...found (1280x1024, 255920 bytes, v3). [ 0.711313] Console: switching to colour frame buffer device 156x60 [ 0.799821] fb0: VESA VGA frame buffer device [ 0.799934] ERST: Table is not found! [ 0.799968] isapnp: Scanning for PnP cards... [ 1.110243] isapnp: No Plug & Play device found [ 1.110539] Non-volatile memory driver v1.3 [ 1.110543] Linux agpgart interface v0.103 [ 1.110805] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.116861] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 1.116961] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 1.154806] Fixed MDIO Bus: probed [ 1.154918] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.157635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.157645] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.157804] mice: PS/2 mouse device common for all mice [ 1.157924] cpuidle: using governor ladder [ 1.157927] cpuidle: using governor menu [ 1.158294] TCP cubic registered [ 1.158358] NET: Registered protocol family 10 [ 1.158872] lo: Disabled Privacy Extensions [ 1.159216] Registering the dns_resolver key type [ 1.159279] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 1.159295] Using IPI No-Shortcut mode [ 1.159449] PM: Checking hibernation image partition /dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part1 [ 1.176538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.327974] psmouse serio1: ID: 10 00 64 [ 2.031412] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 2.033963] PM: Hibernation image not present or could not be loaded. [ 2.033985] registered taskstats version 1 [ 2.034222] Magic number: 15:606:1000 [ 2.034235] pnp1: hash matches [ 2.034256] pnp 00:02: hash matches [ 2.034380] Freeing unused kernel memory: 428k freed [ 2.034775] Write protecting the kernel text: 4112k [ 2.034859] Write protecting the kernel read-only data: 2868k [ 2.111223] libata version 3.00 loaded. [ 2.135252] ata_piix 0000:00:1f.1: version 2.13 [ 2.135285] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.135341] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.135924] scsi0 : ata_piix [ 2.136117] scsi1 : ata_piix [ 2.138923] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 2.138927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 2.138968] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.138978] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 2.139039] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.139540] scsi2 : ata_piix [ 2.139672] scsi3 : ata_piix [ 2.139756] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc400 irq 18 [ 2.139760] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xc408 irq 18 [ 2.303213] ata4.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133 [ 2.303219] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.303477] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100 [ 2.303483] ata1.00: 488397168 sectors, multi 16: LBA48 [ 2.308256] ata4.00: configured for UDMA/133 [ 2.332279] ata1.00: configured for UDMA/100 [ 2.332455] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 2.332708] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.332830] sd 0:0:0:0: [sda] Write Protect is off [ 2.332835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.332888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.337295] sda: sda1 sda2 sda3 [ 2.337748] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.476339] ata2.00: ATAPI: ASUS DRW-1608P2S, 1.41, max UDMA/66 [ 2.476346] ata2.01: ATAPI: ASUS DRW-22B2L, 1.01, max UDMA/66 [ 2.492205] ata2.00: configured for UDMA/66 [ 2.508159] ata2.01: configured for UDMA/66 [ 2.521655] scsi 1:0:0:0: CD-ROM ASUS DRW-1608P2S 1.41 PQ: 0 ANSI: 5 [ 2.525263] scsi 1:0:1:0: CD-ROM ASUS DRW-22B2L 1.01 PQ: 0 ANSI: 5 [ 2.525573] scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5 [ 2.525767] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.525895] sd 3:0:0:0: [sdb] Write Protect is off [ 2.525900] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.525953] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.532894] sdb: sdb1 [ 2.533233] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.555898] ACPI: acpi_idle registered with cpuidle [ 2.568049] udev[87]: starting version 166 [ 2.780764] usbcore: registered new interface driver usbfs [ 2.780809] usbcore: registered new interface driver hub [ 2.785778] rtc_cmos 00:02: RTC can wake from S4 [ 2.787095] usbcore: registered new device driver usb [ 2.796524] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.796564] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.831171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.831233] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.831269] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.831276] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.831321] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.852148] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.856060] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.856100] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00 [ 2.860631] uhci_hcd: USB Universal Host Controller Interface driver [ 2.868025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.868084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.868089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.868092] usb usb1: Product: EHCI Host Controller [ 2.868095] usb usb1: Manufacturer: Linux 2.6.37.6-0.5-default ehci_hcd [ 2.868098] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.868335] hub 1-0:1.0: USB hub found [ 2.868346] hub 1-0:1.0: 8 ports detected [ 2.868542] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.868563] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.868568] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.868584] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.888099] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000 [ 2.888159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.888163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.888167] usb usb2: Product: UHCI Host Controller [ 2.888170] usb usb2: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.888173] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.888464] hub 2-0:1.0: USB hub found [ 2.888476] hub 2-0:1.0: 2 ports detected [ 2.888654] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.888667] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.888672] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.888685] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.896074] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 2.896127] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.896131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.896135] usb usb3: Product: UHCI Host Controller [ 2.896138] usb usb3: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.896141] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.896445] hub 3-0:1.0: USB hub found [ 2.896457] hub 3-0:1.0: 2 ports detected [ 2.896593] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.896604] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.896609] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.896621] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.908898] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 [ 2.908974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.908981] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.908986] usb usb4: Product: UHCI Host Controller [ 2.908990] usb usb4: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.908994] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.909957] hub 4-0:1.0: USB hub found [ 2.909969] hub 4-0:1.0: 2 ports detected [ 2.910425] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.910441] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.910448] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.910464] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.920074] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00 [ 2.920134] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.920138] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.920142] usb usb5: Product: UHCI Host Controller [ 2.920145] usb usb5: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd [ 2.920148] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.920400] hub 5-0:1.0: USB hub found [ 2.920411] hub 5-0:1.0: 2 ports detected [ 3.182224] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 3.182231] PM: Basic memory bitmaps created [ 3.193645] PM: Basic memory bitmaps freed [ 3.271104] PM: Starting manual resume from disk [ 3.271109] PM: Hibernation image partition 8:1 present [ 3.271111] PM: Looking for hibernation image. [ 3.271409] PM: Image not found (code -22) [ 3.271412] PM: Hibernation image not present or could not be loaded. [ 3.414405] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 3.497739] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 3.532405] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 3.713756] usb 4-1: New USB device found, idVendor=03f0, idProduct=1405 [ 3.713762] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12 [ 3.713766] usb 4-1: Product: HP Scanjet Scanner [ 3.713769] usb 4-1: Manufacturer: Hewlett-Packard [ 3.713772] usb 4-1: SerialNumber: CN39DS24B1 [ 5.201647] preloadtrace: systemtap: 1.4/0.149, base: f8d38000, memory: 30data/39text/13ctx/13net/282alloc kb, probes: 34 [ 6.081291] udev[381]: starting version 166 [ 6.211104] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.211228] ACPI: Power Button [PWRB] [ 6.211349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.211430] ACPI: Power Button [PWRF] [ 6.408054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.592639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.837118] Floppy drive(s): fd0 is 1.44M [ 6.845179] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.853641] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.853739] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.853829] scsi 1:0:1:0: Attached scsi generic sg2 type 5 [ 6.855265] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 6.856578] FDC 0 is a post-1991 82077 [ 6.859820] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 6.859890] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 6.918247] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 6.918335] 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.919431] 8139too 0000:02:05.0: eth0: RealTek RTL8139 at 0xf9112c00, 00:25:22:10:ff:bb, IRQ 22 [ 7.085253] intel_rng: FWH not detected [ 7.104656] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.104664] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.104939] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.112966] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.113200] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 7.256666] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.285842] WARNING! power/level is deprecated; use power/control instead [ 7.412782] iTCO_vendor_support: vendor-support=0 [ 7.442719] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.442816] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 7.686461] IR NEC protocol handler initialized [ 7.764029] intel8x0_measure_ac97_clock: measured 55546 usecs (2676 samples) [ 7.764034] intel8x0: clocking to 48000 [ 7.830792] nvidia: module license 'NVIDIA' taints kernel. [ 7.830798] Disabling lock debugging due to kernel taint [ 8.383945] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.383958] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.384228] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.28 Wed Sep 29 09:47:25 PDT 2010 [ 8.406543] IR RC5(x) protocol handler initialized [ 8.415617] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 8.415777] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 8.415900] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.523438] IR RC6 protocol handler initialized [ 8.537462] IR JVC protocol handler initialized [ 8.574795] IR Sony protocol handler initialized [ 8.592355] lirc_dev: IR Remote Control driver registered, major 252 [ 8.594856] IR LIRC bridge handler initialized [ 8.690880] Linux video capture interface: v2.00 [ 8.812827] bttv: driver version 0.9.18 loaded [ 8.812833] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 8.812929] bttv: Bt8xx card found (0). [ 8.812956] bttv 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.812972] bttv0: Bt878 (rev 17) at 0000:02:01.0, irq: 22, latency: 32, mmio: 0xefefe000 [ 8.813032] bttv0: detected: Leadtek WinFast VC 100 [card=114], PCI subsystem ID is 107d:6607 [ 8.813038] bttv0: using: Winfast VC100 [card=114,autodetected] [ 8.813094] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 8.813136] bt878 #0 [sw]: Test OK [ 8.813293] bttv0: tuner absent [ 8.813422] bttv0: registered device video0 [ 8.813498] bttv0: registered device vbi0 [ 8.813521] bttv0: PLL: 28636363 => 35468950 .. ok [ 9.358413] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k [ 10.052528] device-mapper: uevent: version 1.0.3 [ 10.052863] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 10.758172] kjournald starting. Commit interval 15 seconds [ 10.758640] EXT3-fs (sda3): using internal journal [ 10.758648] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 10.808371] fuse init (API version 7.15) [ 13.202335] microcode: CPU0 sig=0xf49, pf=0x4, revision=0x3 [ 13.404523] microcode: CPU1 sig=0xf49, pf=0x4, revision=0x3 [ 13.407958] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 13.608175] powernow: This module only works with AMD K7 CPUs [ 15.377446] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 18.440910] /dev/vmmon[1606]: Module vmmon: registered with major=10 minor=165 [ 18.440921] /dev/vmmon[1606]: Module vmmon: initialized [ 18.633012] /dev/vmci[1614]: VMCI: Driver initialized. [ 18.633220] /dev/vmci[1614]: Module vmci: registered with major=10 minor=59 [ 18.633226] /dev/vmci[1614]: Module vmci: initialized [ 19.074002] ppdev: user-space parallel port driver [ 19.491046] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 19.491066] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 19.491115] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 19.775844] /dev/vmnet: open called by PID 1735 (vmnet-bridge) [ 19.775859] /dev/vmnet: hub 0 does not exist, allocating memory. [ 19.775909] /dev/vmnet: port on hub 0 successfully opened [ 19.775954] bridge-eth0: up [ 19.775962] bridge-eth0: attached [ 21.114504] /dev/vmnet: open called by PID 1744 (vmnet-dhcpd) [ 21.114521] /dev/vmnet: hub 1 does not exist, allocating memory. [ 21.114556] /dev/vmnet: port on hub 1 successfully opened [ 21.259137] /dev/vmnet: open called by PID 1746 (vmnet-netifup) [ 21.259155] /dev/vmnet: port on hub 1 successfully opened [ 21.786442] /dev/vmnet: open called by PID 1802 (vmnet-dhcpd) [ 21.786460] /dev/vmnet: hub 8 does not exist, allocating memory. [ 21.786510] /dev/vmnet: port on hub 8 successfully opened [ 22.216706] /dev/vmnet: open called by PID 1806 (vmnet-natd) [ 22.216725] /dev/vmnet: port on hub 8 successfully opened [ 22.282399] /dev/vmnet: open called by PID 1807 (vmnet-netifup) [ 22.282418] /dev/vmnet: port on hub 8 successfully opened [ 24.077611] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 24.840614] w83627hf: Found W83627HF chip at 0x290 [ 27.440028] /dev/vmmon[1743]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445434613446110699 new 18445434613443758144 attempts 1 [ 29.911470] bootsplash: status on console 0 changed to on [ 44.634972] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 __________________________ -- Szágyi Károly www.fotokaresz.hu www.myopensuse.hu