Bonjour a tous, Cela fait quelques jours que j'essaye de mettre en place DRBD sur 2 machines de test mais je bloque toujours au meme endroits. La config est la suivante : Sur pc406-139 : 2 disques : sda1 -> / , sda6 -> /usr , sdb1 -> utilisé pour DRBD (/home), eth0 -> 134.214.xxx.xxx , eth2 -> 192.168.24.11 Sur pc406-127 : 2 disques : sda1 -> / , sda6 -> /usr , sdb1 -> utilisé pour DRBD (/home), eth0 -> 134.214.xxx.xxx, eth1 -> 192.168.24.10 Le fichier /etc/drbd.conf est identique sur les deux machines global { dialog-refresh 1; usage-count no; minor-count 5; } common { } resource r0 { protocol C; startup { become-primary-on both; } disk { on-io-error detach; } net { allow-two-primaries; after-sb-0pri discard-least-changes; after-sb-1pri violently-as0p; after-sb-2pri violently-as0p; rr-conflict violently; } syncer { rate 10M; } on pc406-127 { device /dev/drbd0; disk /dev/sdb1; address 192.168.24.10:7788; meta-disk internal; } on pc406-139 { device /dev/drbd0; disk /dev/sdb1; address 192.168.24.11:7788; meta-disk internal; } } pc406-139:~ # drbdadm create-md r0 You want me to create a v08 style flexible-size internal meta data block. There appears to be a v08 flexible-size internal meta data block already in place on /dev/sdb1 at byte offset 37580959744 Do you really want to overwrite the existing v08 meta-data? [need to type 'yes' to confirm] yes Writing meta data... initializing activity log NOT initialized bitmap New drbd meta data block successfully created. pc406-139:~ # drbdadm attach r0 0: Failure: (114) Lower device is already claimed. This usually means it is mounted. Command 'drbdsetup 0 disk /dev/sdb1 /dev/sdb1 internal --set-defaults -- create-device --on-io-error=detach' terminated with exit code 10 pc406-139:~ # cat /proc/drbd version: 8.3.7 (api:88/proto:86-92) srcversion: 04F43AA72D62F7D4F0CB048 0: cs:Unconfigured Le probleme est que je ne vois pas à quoi le device est monté. Le probleme est le meme sur pc406-127 Quelqu'un à déjà rencontré se problème ? -- Fabien CHAUDIER Departement Biosciences 11 av. Jean Capelle 69621 Villeurbanne cedex Tél. : 04 72 43 89 96 Fax : 04 72 43 85 11 ------------------------------------ Are You Environmentalist ? -- To unsubscribe, e-mail: opensuse-fr+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-fr+help@opensuse.org