He hecho lo que dice emiliano, es decir, /etc/init.d/network restart y me sale esto: Fijo:/home/Vicente # /etc/init.d/network restart Shutting down network interfaces: eth0 eth0 No configuration found for eth0 Nevertheless the interface will be shut down. eth0 configuration: done wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) done Shutting down service network . . . . . . . . . . . . . done. Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: lo ERROR: command 'iwconfig lo mode Ad-Hoc' returned Error for wireless request "Set Mode" (8B06) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo nick Fijo' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key open 0123-4567-89' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo essid CASA' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device lo ; Operation not supported. done eth0 eth0 No configuration found for eth0 unused wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) wlan0 warning: using NO encryption wlan0 IP address: 192.168.1.10/24 done ra0 Interface ra0 is not available failed Setting up service network . . . . . . . . . . . . . . done. ¿Qué le pasa a lo? Me tiene negro.
Vicente González Valle wrote:
He hecho lo que dice emiliano, es decir, /etc/init.d/network restart y me sale esto:
Probaste a quitar el parametro ese extraño q te salia en el fichero ifcfg-lo?
Fijo:/home/Vicente # /etc/init.d/network restart Shutting down network interfaces: eth0 eth0 No configuration found for eth0 Nevertheless the interface will be shut down. eth0 configuration: done wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) done Shutting down service network . . . . . . . . . . . . . done. Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: lo ERROR: command 'iwconfig lo mode Ad-Hoc' returned Error for wireless request "Set Mode" (8B06) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo nick Fijo' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key open 0123-4567-89' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo essid CASA' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device lo ; Operation not supported. done eth0 eth0 No configuration found for eth0 unused wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) wlan0 warning: using NO encryption wlan0 IP address: 192.168.1.10/24 done ra0 Interface ra0 is not available failed Setting up service network . . . . . . . . . . . . . . done.
¿Qué le pasa a lo? Me tiene negro.
Pues ni idea, no habia visto mensajes asi nunca, prueba lo que te comenté mas arriba y nos cuentas
El jue, 14-04-2005 a las 19:37 +0200, Emiliano Sutil escribió:
Vicente González Valle wrote:
He hecho lo que dice emiliano, es decir, /etc/init.d/network restart y me sale esto:
Probaste a quitar el parametro ese extraño q te salia en el fichero ifcfg-lo?
Fijo:/home/Vicente # /etc/init.d/network restart Shutting down network interfaces: eth0 eth0 No configuration found for eth0 Nevertheless the interface will be shut down. eth0 configuration: done wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) done Shutting down service network . . . . . . . . . . . . . done. Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: lo ERROR: command 'iwconfig lo mode Ad-Hoc' returned Error for wireless request "Set Mode" (8B06) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo nick Fijo' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key off' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo key open 0123-4567-89' returned Error for wireless request "Set Encode" (8B2A) : SET failed on device lo ; Operation not supported. ERROR: command 'iwconfig lo essid CASA' returned Error for wireless request "Set ESSID" (8B1A) : SET failed on device lo ; Operation not supported. done eth0 eth0 No configuration found for eth0 unused wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) wlan0 warning: using NO encryption wlan0 IP address: 192.168.1.10/24 done ra0 Interface ra0 is not available failed Setting up service network . . . . . . . . . . . . . . done.
¿Qué le pasa a lo? Me tiene negro.
Pues ni idea, no habia visto mensajes asi nunca, prueba lo que te comenté mas arriba y nos cuentas
Parece ser que a la hora de configurar lo miraba en un fichero que esta en el mismo directorio que se llama Wireless e intentaba ejecutar lo que allí decía. Lo he quitado y ya no hay problema para que introduzca lo de entrada. ¿Por qué miraría allí? ¿Tendrá que ver con el hecho de que la Wireless funciona cuando le da la gana, casi nunca, y luego se cuelga? Echarme un cable con la wireless, por fa. De todas formas gracias por todo.
El 2005-04-14 a las 18:53 +0200, Vicente González Valle escribió:
He hecho lo que dice emiliano, es decir, /etc/init.d/network restart y me sale esto:
Mmm. Una petición: Cuando contestes a alguien, no lo hagas metiendo un correo nuevo; busca el correo de Emiliano y le contestas. Hace un rato acabo de contestarte preguntándote que cual era el resultado de ese comando; pero si hubieras puesto tu correo como respuesta lo hubiera visto inmediatamente y me lo hubiera ahorrado. ¿Fale? :-)
Fijo:/home/Vicente # /etc/init.d/network restart Shutting down network interfaces:
Esto es la fase de "apagado" de la red.
eth0 eth0 No configuration found for eth0 Nevertheless the interface will be shut down. eth0 configuration: done wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) done Shutting down service network . . . . . . . . . . . . . done. Hint: you may set mandatory devices in /etc/sysconfig/network/config
Hay una linea en "/etc/sysconfig/network/config" que pone: MANDATORY_DEVICES="" Pero como en mio está en blanco, no es el caso para "lo". Fíjate que arriba está diciendo que no ha encontrado la configuración de eth0, pero que sin embargo la cerrará. Algo raro tienes.
Setting up network interfaces: lo
Aquí está arrancando "lo".
ERROR: command 'iwconfig lo mode Ad-Hoc' returned Error for wireless request "Set Mode" (8B06) : SET failed on device lo ; Operation not supported.
Y aquí está reportado el error. Y es muy raro, porque está diciendo que al poner el comando "iwconfig lo mode Ad-Hoc" le dice que no está soportado; pero lo trata como un dispositivo "wireless". Eso es muy raro. Me da la sospecha que has puesto algo de la interfaz "lo" en la wireless.
eth0 eth0 No configuration found for eth0 unused
No puede arrancar la eth0, no hay configuración para ella. ¿La tuviste y la quitaste?
wlan0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) wlan0 warning: using NO encryption
wlan sin encriptación. Ojo, que cualquiera te puede "esnifar". -- Saludos Carlos Robinson
El 2005-04-14 a las 18:53 +0200, Vicente González Valle escribió:
He hecho lo que dice emiliano, es decir, /etc/init.d/network restart y me sale esto:
Otra idea. La interfaz "lo" en realidad la levanta "/etc/init.d/boot.localnet". La secuencia sería parar la red (rcnetwork stop) y entonces intentar levantar la interfaz "lo", con "/etc/init.d/boot.localnet restart". Y a ver que errores saltan. También, como dije antes, mira en /var/log/boot.msg. -- Saludos Carlos Robinson
Supongo que habrás leído el mensaje que mandé después de los tuyos. No se la razón por la que tomaba lo por una wireless, aunque cuando daba iwconfig ponía no wireless. La eth0 es la que funciona cuando conecto a internet con el modem eagleusb para adsl de wanadoo. De hecho cuando estoy en internet e intento modificar algo en la tarjeta de red, por ejemplo los dns, estos están controlados por eagle. Bueno, si sigo mirando, el boot.msg desde que hice el cambio en el archivo wirelles ya arranca sin problemas, pero me escama mucho el resultado de /sbin/ip route, que es el siguiente si no estoy en internet: Fijo:/home/Vicente # /sbin/ip route 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.10 169.254.0.0/16 dev wlan0 scope link 127.0.0.0/8 dev lo scope link Si estoy en internet me da: Fijo:/home/Vicente # /sbin/ip route 192.168.153.1 dev ppp0 proto kernel scope link src 83.43.134.26 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.10 169.254.0.0/16 dev wlan0 scope link 127.0.0.0/8 dev lo scope link default via 192.168.153.1 dev ppp0 De todo lo que más me escama es 169.254.0.0/16 que aparece en ambos. ¿Se os ocurre algo? ¿Puede impedir esto que funcione la red inalámbrica? Gracias de antemano.
participants (3)
-
Carlos E. R.
-
Emiliano Sutil
-
Vicente González Valle