El comando "dmesg" da como respuesta lo siguiente: Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 11, latency: 32, mmio: 0xef003000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00a4fff3 [init] i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: bt878 #0 [sw] passed test. tveeprom(bttv internal): Huh, no eeprom present (err=-121)? bttv0: using tuner=20 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) by bt878 #0 [sw] tuner: type already set to 20, ignoring request for 14 tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok msp3400: Unknown parameter `simple' load_module: err 0xfffffffe (dont worry) Disabled Privacy Extensions on device cd8ed800(sit0)
-- Vicente González Valle Profesor de secundaria de Matemáticas Badajoz