Oído cocina, en cuanto tenga un rato (y me atreva) me pongo con lo del kernel. A ver si así puedo reinstalar con ACPI activado y puedo apagar el ordenador normalmente, sin darle al botón gordo cuando se desmonta todo el sistema. De todas maneras, ¡ya he resuelto lo de la grabadora! Al final era una chorrada, tenía la secuencia de arranque como sigue: floppy-cd rom-hard disk. La he cambiado a floppy-hard disk-cd rom y solucionado, ya reconoce la grabadora (si alguien me puede explicar por qué pasa eso, que me lo diga). Bueno, gracias. PD: otro problema resuelto gracias a la lista, sois unos cracks. --- Juan Erbes <jerbes@arnet.com.ar> escribió:
Gerardo Serrano wrote:
Hola, después de que me ayudaseis a recuperar mi SuSE 9.2 x86_64 tras desactivar ACPI, me he puesto con el tema de conseguir rescatar mi grabadora de DVD. He reinstalado el sistema con ACPI disabled y va muy bien, pero mi grabadora sigue sin encontrarla. Ayer se me ocurrió arrancar pasándole al inicio pci=noacpi y ¡voilà! ahí estaba la grabadora (me la reconocía como grabadora de CD, pero el caso es que estaba). Cuando vuelvo a arrancar sin poner ese parámetro, pues nada. A ver si alguien me podría decir cómo hacer que SuSE reconozca mi grabadora.
Actualiza el kernel a la ultima versión de SuSE, y probablemente lo soluciones (salió ayer). Ten cuidado con la creación del symlink de /boot/initrd y que este apunta al que corresponde al kernel nuevo. Verificalo bien antes de reiniciar.
SUSE Linux 9.2: - The kernel installation routines did not call depmod for the modules in the -nongpl RPMs, so they could not be loaded. This lead to non working USB modem drivers and similar. This problem was fixed.
- A Problem with mounting iPods over FireWire was fixed.
- A data corruption problem in the megaraid driver was fixed.
- A pageattr overflow condition in the memory subsystem and missing TLB flush if multiple pages were passed were fixed.
- Allow reading from zeropage with O_DIRECT/rawio.
- Do not restart the system on ACPI events after power down. (Make it no longer start on opening the lid of just shutdown laptops for instance.)
- New memory imbalance handling handling by Andrea leading to better Out Of Memory (OOM) handling was added.
2) solution/workaround
Please install the fixed packages, there is no workaround.
3) special instructions and notes
SPECIAL INSTALL INSTRUCTIONS: ============================== The following paragraphs will guide you through the installation process in a step-by-step fashion. The character sequence "****" marks the beginning of a new paragraph. In some cases, the steps outlined in a particular paragraph may or may not be applicable to your situation. Therefore, please make sure to read through all of the steps below before attempting any of these procedures. All of the commands that need to be executed are required to be run as the superuser (root). Each step relies on the steps before it to complete successfully.
**** Step 1: Determine the needed kernel type
Please use the following command to find the kernel type that is installed on your system:
rpm -qf /boot/vmlinuz
Following are the possible kernel types (disregard the version and build number following the name separated by the "-" character)
k_deflt # default kernel, good for most systems. k_i386 # kernel for older processors and chip sets k_athlon # kernel made specifically for AMD Athlon(tm) family processors k_psmp # kernel for Pentium-I dual processor systems k_smp # kernel for SMP systems (Pentium-II and above) k_smp4G # kernel for SMP systems which supports a maximum of 4G of RAM kernel-64k-pagesize kernel-bigsmp kernel-default kernel-smp
**** Step 2: Download the package for your system
Please download the kernel RPM package for your distribution with the name as indicated by Step 1. The list of all kernel rpm packages is appended below. Note: The kernel-source package does not contain a binary kernel in bootable form. Instead, it contains the sources that the binary kernel rpm packages are created from. It can be used by administrators who have decided to build their own kernel. Since the kernel-source.rpm is an installable (compiled) package that contains sources for the linux kernel, it is not the source RPM for the kernel RPM binary packages.
The kernel RPM binary packages for the distributions can be found at the locations below ftp://ftp.suse.com/pub/suse/i386/update/.
8.1/rpm/i586 8.2/rpm/i586 9.0/rpm/i586 9.1/rpm/i586 9.2/rpm/i586
After downloading the kernel RPM package for your system, you should verify the authenticity of the kernel rpm package using the methods as listed in section 3) of each SUSE Security Announcement.
**** Step 3: Installing your kernel rpm package
Install the rpm package that you have downloaded in Steps 3 or 4 with the command rpm -Uhv --nodeps --force <K_FILE.RPM> where <K_FILE.RPM> is the name of the rpm package that you downloaded.
Warning: After performing this step, your system will likely not be able to boot if the following steps have not been fully followed.
If you run SUSE LINUX 8.1 and haven't applied the kernel update (SUSE-SA:2003:034), AND you are using the freeswan package, you also need to update the freeswan rpm as a dependency as offered by YOU (YaST Online Update). The package can be downloaded from
ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/
**** Step 4: configuring and creating the initrd
The initrd is a ramdisk that is loaded into the memory of your system together with the kernel boot image by the bootloader. The kernel uses the content of this ramdisk to execute commands that must
=== message truncated === ______________________________________________ Renovamos el Correo Yahoo!: ¡250 MB GRATIS! Nuevos servicios, más seguridad http://correo.yahoo.es