Y este es el segundo de los discos quijote:/home/nacho # smartctl -a /dev/sdb smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.159-73-default] (SUSE RPM) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3500418AS Serial Number: 9VMW53E6 LU WWN Device Id: 5 000c50 02d6a946b Firmware Version: CC46 User Capacity: 500.107.862.016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Oct 23 16:23:33 2018 CEST ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 83) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 75749760 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 092 092 020 Old_age Always - 8584 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 56554601 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11876 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4291 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295032862 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 069 053 045 Old_age Always - 31 (Min/Max 20/35) 194 Temperature_Celsius 0x0022 031 047 000 Old_age Always - 31 (0 16 0 0 0) 195 Hardware_ECC_Recovered 0x001a 025 017 000 Old_age Always - 75749760 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 23659 (206 172 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 907490457 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2349126410 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 11874 - # 2 Extended offline Completed without error 00% 11831 - # 3 Extended offline Completed without error 00% 11762 - # 4 Extended offline Interrupted (host reset) 10% 11645 - # 5 Extended offline Interrupted (host reset) 70% 11609 - # 6 Extended offline Completed without error 00% 11567 - # 7 Extended offline Interrupted (host reset) 40% 11504 - # 8 Extended offline Interrupted (host reset) 50% 11411 - # 9 Extended offline Completed without error 00% 11321 - #10 Extended offline Interrupted (host reset) 90% 11205 - #11 Extended offline Completed without error 00% 11128 - #12 Extended offline Interrupted (host reset) 00% 11033 - #13 Extended offline Interrupted (host reset) 00% 10965 - #14 Extended offline Interrupted (host reset) 00% 10876 - #15 Extended offline Interrupted (host reset) 00% 10851 - #16 Extended offline Interrupted (host reset) 00% 10819 - #17 Extended offline Completed without error 00% 8779 - #18 Extended offline Completed without error 00% 6066 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. quijote:/home/nacho # El 22/10/18 a las 13:29, Carlos E. R. escribió:
On 22/10/2018 11.25, Nacho wrote:
Bueno, resuelto el primer escollo, que procesador comprar, creo que ya lo tengo claro, el elegido es el AMD Ryzen 5 2400G, voy a intentar proveerlo de 32 gb de ram, aunque esta sera la ultima decisión en función de a cuanto ascienda la suma a desembolsar.
Le pienso añadir un disco SSD de 120 gb para el SO (me ha parecido leer en la lista que mejor no usar BRTFS) ¿en que debo fijarme a la hora de elegir uno?
No, lo que yo digo es que si pones btrfs necesitas el triple de espacio que pondrías con ext4.
Hombre, lo ideal sería - no estoy seguro del nombre - mSATA o M.2. Si es el tipo correcto la velocidad es brutal. Es direccionamiento directo desde el bus pci, casi como si fuera memoria.
En cuanto a los discos voy a utilizar los dos que tengo ahora, son dos discos de 500 gb cada uno, Seagate Barracuda, los dos tipo SATA, que aunque ya tienen unos años, aun no me han dado ningún fallo, aunque creo que deberia pasarles un chequeo a ver como estan realmente....
smartctl --test=long /dev/device
Esperar dos o tres horas, y
smartctl -a /dev/device
-- openSUSE Leap 42.2 Versión de KDE Plasma 5.8.3 Versión del Kernel 4.4.46-11-default Procesador: 4xIntel Core 2 Quad CPU Q8200@ 2.33 GHZ Memoria 3,9 GiB de RAM Tarjeta Grafica NVIDIA GeForce 9600 GT/PCIe/SSE2