Hola, En /var/log/messages me aparecen los siguientes mensaje de error: linux rcpowersaved: CPU frequency scaling is not supported by your processor. linux rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning. linux rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available linux [powersave]: ERROR (CPUFreq_Userspace:42) Could not set userspace governor, seems as if the cpufreq_userspace module is not loaded. linux [powersave]: ERROR (read_line:43) Could not open file for linux [powersave]: ERROR (read_line:43) Could not open file for reading: '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq' linux [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq: error: No such file or directory! linux [powersave]: ERROR (read_line:43) Could not open file for reading: '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq' linux [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq: error: No such file or directory! linux [powersave]: WARNING (getMinMaxSpeeds:349) Speedstepping not supported! Was the correct cpufreq module loaded? linux [powersave]: WARNING (initFreqsViaTesting:377) Could not read min and max speed linux [powersave]: ERROR (PM_Interface:231) Cannot create cpufreq objects Se trata de un servidor con dos procesadores Xeon (físicos) y soporte emt64, por lo que SuSE 10.0 (x86_64 - smp) me ve 4 micros. No sé cuál sería la mejor opción en este caso, si se puede desactivar algo (gestión de energía, perfiles de energía...) o si es recomendable mantener esta configuración a pesar de los errores que aparecen. ¿Alguna idea? No se trata de un equipo portátil por eso me extraña ese error. Saludos, -- Camaleón