kernel:[ 1132.162512] Critical temperature reached (121 C), shutting down
Die Meldung "kernel:[ 1132.162512] Critical temperature reached (121 C), shutting down" soll lt. diversen Postings ein Kernelproblem sein und das Problem wurde schon vor Jahren berichtet. Eventuell ist ein fehlender Pin bei einem Kabel dafür verantwortlich, sodass die Daten nicht korrekt ausgelesen werden. Installiert ist 2.6.31.12-0.2-default (Opensuse 11.2) Hier sind die weiteren Daten des Rechners: http://www.smolts.org/client/show/pub_de5ac227-d011-438c-8f2c-cbfac07a8e04 Der Rechner ist ganz neu aufgesetzt, da umpartitioniert wurde und noch nicht einmal fertig konfiguriert. Das Bios zeigt die Temperaturen im grünen Bereich, um die 50°C. Was kann ich dagegen machen, dass der Rechner nicht runterfährt? Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo, Am Don, 08 Jul 2010, Al Bogner schrieb:
Die Meldung "kernel:[ 1132.162512] Critical temperature reached (121 C), shutting down" soll lt. diversen Postings ein Kernelproblem sein und das Problem wurde schon vor Jahren berichtet. Eventuell ist ein fehlender Pin bei einem Kabel dafür verantwortlich, sodass die Daten nicht korrekt ausgelesen werden.
Was ist das für ein MoBo? Bzw. was für ein Sensor-Chip? Siehe /etc/sysconfig/lm_sensors. Wenn du das weißt, kannst du in /etc/sensors.conf (sensors3.conf?) ggfs. Anpassungen machen. HTH, -dnh -- Don't take life too seriously, you ain't getting out alive anyway... -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Fri, 9 Jul 2010 21:23:25 +0200 schrieb David Haller <dnh@opensuse.org>:
Hallo,
Am Don, 08 Jul 2010, Al Bogner schrieb:
Die Meldung "kernel:[ 1132.162512] Critical temperature reached (121 C), shutting down" soll lt. diversen Postings ein Kernelproblem sein und das Problem wurde schon vor Jahren berichtet. Eventuell ist ein fehlender Pin bei einem Kabel dafür verantwortlich, sodass die Daten nicht korrekt ausgelesen werden.
Was ist das für ein MoBo? Bzw. was für ein Sensor-Chip? Siehe /etc/sysconfig/lm_sensors. Wenn du das weißt, kannst du in /etc/sensors.conf (sensors3.conf?) ggfs. Anpassungen machen.
Hallo David, auf das Problem bin ich gekommen, weil ich mir elementOS für meinen noch ungebauten HTPC anschauen wollte: http://www.elementmypc.com/main/index.php Blöder Name, nach element lässt sich so schlecht suchen. Ich habe bereits 2 Bugreports geschrieben: https://bugs.launchpad.net/opensuse/+source/acpi/+bug/314001?comments=all grummel, ich finde den bei bugzilla nicht mehr und Google auch nicht, aber egal. System Info: #1 Manufacturer: "VIA Technologies, Inc." Product: "KT600-8237" UUID: b86c6c8d500000000000000000000000 Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "http://www.abit.com.tw/" Product: "KV7-V(VIA KT600-8237)" Version: "1.x" system.firmware.vendor = 'Phoenix Technologies, LTD' system.firmware.version = '6.00 PG' system.firmware.release_date = '05/19/2005' sensors acpitz-virtual-0 Adapter: Virtual device temp1: +35.5°C (crit = +95.0°C) Driver `w83627hf': * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9) Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): n To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe w83627hf /usr/bin/sensors -s #----cut here---- cat /etc/sysconfig/lm_sensors # Generated by sensors-detect on Thu Jul 8 21:36:07 2010 ## Path: Hardware/Sensors ## Description: Defines the modules to used ## Type: string ## ServiceRestart: lm_sensors ## Default: "" # # This file is sourced by /etc/init.d/lm_sensors and defines the modules to # be loaded/unloaded. # # The format of this file is a shell script that simply defines variables: # HWMON_MODULES for hardware monitoring driver modules, and optionally # BUS_MODULES for any required bus driver module (for example for I2C or SPI). HWMON_MODULES="w83627hf" # For compatibility reasons, modules are also listed individually as variables # MODULE_0, MODULE_1, MODULE_2, etc. # You should use BUS_MODULES and HWMON_MODULES instead if possible. MODULE_0=w83627hf Danach findest du sensors.conf und sensors3.conf Al /etc/sensors.conf chip "lm78-*" "lm78-j-*" "lm79-*" "w83781d-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 -(210/60.4)*@ , -@/(210/60.4) compute in6 -(90.9/60.4)*@ , -@/(90.9/60.4) chip "lm75-*" chip "sis5595-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) chip "w83782d-*" "w83627hf-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" label in7 "V5SB" label in8 "VBat" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) chip "w83783s-*" label in0 "VCore 1" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 chip "w83697hf-*" label in0 "VCore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" label in7 "V5SB" label in8 "VBat" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) chip "w83627thf-*" "w83637hf-*" ignore in5 ignore in6 label in0 "VCore" label in1 "+12V" label in2 "+3.3V" label in3 "+5V" label in4 "-12V" label in7 "V5SB" label in8 "VBat" compute in1 ((28/10)+1)*@, @/((28/10)+1) compute in3 ((34/51)+1)*@, @/((34/51)+1) compute in4 (5.14*@)-14.91, (@+14.91)/5.14 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) label temp1 "M/B Temp" label temp2 "CPU Temp" label fan2 "CPU Fan" chip "w83792d-*" label in0 "VCoreA" label in1 "VCoreB" label in2 "VIN0" label in3 "VIN1" label in4 "VIN2" label in5 "VIN3" label in6 "5VCC" label in7 "5VSB" label in8 "VBAT" label fan1 "Fan1" label fan2 "Fan2" label fan3 "Fan3" label fan4 "Fan4" label fan5 "Fan5" label fan6 "Fan6" label fan7 "Fan7" label temp1 "Temp1" label temp2 "Temp2" label temp3 "Temp3" chip "w83793-*" label in0 "VCoreA" label in1 "VCoreB" label in2 "Vtt" label in5 "+3.3V" label in6 "+12V" label in7 "+5V" label in8 "5VSB" label in9 "VBAT" compute in6 12*@ , @/12 label temp1 "CPU1 Temp" label temp2 "CPU2 Temp" chip "as99127f-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 -(240/60.4)*@ , -@/(240/60.4) compute in6 -(90.9/60.4)*@ , -@/(90.9/60.4) label temp1 "M/B Temp" label temp2 "CPU Temp" chip "gl518sm-*" label vdd "+5V" label vin1 "+3.3V" label vin2 "+12V" label vin3 "Vcore" compute vin2 (197/47)*@ , @/(197/47) chip "gl520sm-*" label vdd "+5V" label vin1 "+3.3V" label vin2 "+12V" label vin3 "Vcore" label vin4 "-12V" compute vin2 (197/47)*@ , @/(197/47) compute vin4 (5*@)-(4*vdd) , (@+4*vdd)/5 chip "lm80-*" label in0 "+5V" label in1 "VTT" label in2 "+3.3V" label in3 "+Vcore" label in4 "+12V" label in5 "-12V" label in6 "-5V" compute in0 (24/14.7 + 1) * @ , @ / (24/14.7 + 1) compute in2 (22.1/30 + 1) * @ , @ / (22.1/30 + 1) compute in3 (2.8/1.9) * @, @ * 1.9/2.8 compute in4 (160/30.1 + 1) * @, @ / (160/30.1 + 1) compute in5 (160/35.7)*(@ - in0) + @, (@ + in0 * 160/35.7)/ (1 + 160/35.7) compute in6 (36/16.2)*(@ - in0) + @, (@ + in0 * 36/16.2) / (1 + 36/16.2) chip "maxilife-cg-*" "maxilife-co-*" "maxilife-as-*" label fan1 "HDD Fan" label fan2 "PCI Fan" label fan3 "CPU Fan" ignore fan4 label temp2 "PCI Temp" label temp4 "HDD Temp" label temp5 "CPU Temp" ignore temp6 label vid1 "V+12" ignore vid5 compute vid1 6.337*@ , @/6.337 chip "maxilife-cg-*" ignore temp1 label temp3 "BX Temp" label vid2 "Vcpu1" label vid3 "Vcpu2" ignore vid4 chip "maxilife-co-*" label temp1 "CPU 1 Temp" label temp3 "CPU 2 Temp" label vid2 "Vcpu1" label vid3 "Vcpu2" label vid4 "VcacheL2" chip "maxilife-as-*" ignore temp1 ignore temp3 label vid2 "Vcpu" ignore vid3 ignore vid4 chip "maxilife-nba-*" label fan1 "CPU Fan" label fan2 "PCI Fan" label fan3 "HDD Fan" label fan4 "Heat Sink Fan" label temp1 "CPU 1 Temp" label temp2 "CPU 2 Temp" label temp3 "PCI/Ambient Temp" label temp4 "HDD Temp" label temp5 "Motherboard Temp" label temp6 "CPU Reference Temp" label vid1 "V+12" label vid2 "Vcpu1" label vid3 "Vcpu2" label vid4 "VcacheL2" label vid5 "V-12" chip "via686a-*" label "2.0V" "CPU core" label "2.5V" "+2.5V" label "3.3V" "I/O" label "5.0V" "+5V" label "12V" "+12V" label fan1 "CPU Fan" label fan2 "P/S Fan" label temp1 "SYS Temp" label temp2 "CPU Temp" label temp3 "SBr Temp" chip "mtp008-*" label in0 "VCore1" label in1 "+3.3V" label in2 "+12V" label in3 "Vcore2" ignore in4 label in5 "-12V" label in6 "Vtt" label fan1 "CPU1 Fan" label fan2 "CPU2 Fan" label fan3 "fan3" label temp1 "CPU1 Temp" label temp2 "CPU2 Temp" ignore temp3 compute in2 @ * 38 / 10, @ * 10 / 38 compute in5 (@ * 36 - 118.61) / 7, (118.61 + 7 * @) / 36 chip "adm1025-*" "ne1619-*" label in0 "+2.5V" label in1 "VCore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" label temp1 "CPU Temp" label temp2 "M/B Temp" chip "lm87-*" label "2.5V" "+2.5V" label Vccp1 "VCore" label "3.3V" "+3.3V" label "5V" "+5V" label "12V" "+12V" label fan1 "CPU Fan" label temp1 "M/B Temp" label CPU_Temp "CPU Temp" chip "adm9240-*" "ds1780-*" "lm81-*" chip "adm1024-*" label fan1 "CPU1 fan" label fan2 "CPU2 fan" label temp "SYS Temp" label temp1 "CPU2 Temp" label temp2 "CPU1 Temp" ignore "2.5V" # This register is also used for temp2 ignore "Vccp1" ignore "Vccp2" chip "it87-*" "it8712-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" label in7 "Stdby" label in8 "VBat" ignore vid compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((30/10) +1)*@ , @/((30/10) +1) compute in5 (7.67 * @) - 27.36 , (@ + 27.36) / 7.67 compute in6 (4.33 * @) - 13.64 , (@ + 13.64) / 4.33 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) label temp1 "M/B Temp" label temp2 "CPU Temp" label temp3 "Temp3" chip "it8716-*" label in0 "VCore" label in1 "VDDR" label in2 "+3.3V" # VCC3 label in3 "+5V" # VCC label in4 "+12V" label in7 "5VSB" # VCCH label in8 "VBat" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((30/10)+1)*@ , @/((30/10)+1) compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) chip "fscpos-*" label temp1 "Temp1/CPU" label temp2 "Temp2/MB" label temp3 "Temp3/AUX" label fan1 "Fan1" label fan2 "Fan2" label fan3 "Fan3" label volt12 "+12V" label volt5 "+5V" label voltbatt "Battery" chip "fscscy-*" label temp1 "Temp1/CPU0" label temp2 "Temp2/CPU1" label temp3 "Temp3/MB" label temp4 "Temp4/AUX" label fan1 "Fan1/CPU0" label fan2 "Fan2/CPU0" label fan3 "Fan3" label fan4 "Fan4" label fan5 "Fan5" label fan6 "Fan6" label volt12 "+12V" label volt5 "+5V" label voltbatt "+3.3V" chip "fscher-*" label temp1 "Temp1/CPU" label temp2 "Temp2/MB" label temp3 "Temp3/AUX" label fan1 "Fan1/PS" label fan2 "Fan2/CPU" label fan3 "Fan3/AUX" label in0 "+12V" label in1 "+5V" label in2 "Battery" compute in0 (@ * (49 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (49 * 33) compute in1 (@ * (20 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (20 * 33) compute in2 (@ * (10 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (10 * 33) chip "pcf8591-*" ignore ain_conf label ch0 "Chan. 0" label ch1 "Chan. 1" label ch2 "Chan. 2" label ch3 "Chan. 3" ignore aout_enable label aout "Output" chip "adm1021-*" "adm1023-*" "max1617-*" "max1617a-*" "thmc10-*" "lm84-*" "gl523sm-*" "mc1066-*" label temp "Board Temp" label remote_temp "CPU Temp" chip "lm83-*" label temp1 "M/B Temp" label temp2 "D1 Temp" label temp3 "CPU Temp" label temp4 "D3 Temp" chip "max1619-*" label temp1 "M/B Temp" label temp2 "CPU Temp" chip "lm90-*" "adm1032-*" "lm86-*" "max6657-*" "adt7461-*" "max6680-*" label temp1 "M/B Temp" label temp2 "CPU Temp" label tcrit1 "M/B Crit" label tcrit2 "CPU Crit" chip "lm99-*" label temp1 "G/C Temp" label temp2 "GPU Temp" label tcrit1 "G/C Crit" label tcrit2 "GPU Crit" compute temp2 @+16, @-16 chip "lm63-*" label temp1 "M/B Temp" label temp2 "CPU Temp" label temp2_crit "CPU Crit" label fan1 "CPU Fan" chip "vt1211-*" ignore temp5 ignore temp6 ignore temp7 label in0 "+3.3V" label in1 "+2.5V" label in2 "VCore" label in3 "+5V" label in4 "+12V" label in5 "+3.3V" label temp1 "CPU Temp" label temp2 "Int Temp" label fan1 "Case Fan" label fan2 "CPU Fan" compute in0 @ * (1 + 6.8 / 10), @ / (1 + 6.8 / 10) compute in1 @ * (1 + 2 / 10), @ / (1 + 2 / 10) compute in3 @ * (1 + 14 / 10), @ / (1 + 14 / 10) compute in4 @ * (1 + 47 / 10), @ / (1 + 47 / 10) set in5_min 3.3 * 0.95 set in5_max 3.3 * 1.05 compute temp1 (@ - 73.869) / 0.9528, (@ * 0.9528) + 73.869 compute temp3 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) compute temp4 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) compute temp5 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) compute temp6 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) compute temp7 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) chip "vt8231-*" label in1 "+2.5V" label in2 "VCore" label in3 "+5V" label in4 "+12V" label in5 "+3.3V" label temp1 "CPU Temp" label temp2 "M/B Temp" compute in1 @ * (1 + 2 / 10), @ / (1 + 2 / 10) compute in3 @ * (1 + 14 / 10), @ / (1 + 14 / 10) compute in4 @ * (1 + 47 / 10), @ / (1 + 47 / 10) compute temp1 (@ - 65) / 0.9686, (@ * 0.9686) + 65 compute temp2 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) compute temp3 1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \ 2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) chip "bmc-*" chip "smsc47m1-*" chip "smsc47m192-*" label in0 "+2.5V" label in1 "VCore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" label in6 "+1.5V" label in7 "+1.8V" label temp1 "Chip Temp" label temp2 "CPU Temp" label temp3 "Sys Temp" chip "asb100-*" label in0 "VCore 1" label in1 "VCore 2" ignore in1 label in2 "+3.3V" label in3 "+5V" compute in3 1.68 * @ , @ / 1.68 label in4 "+12V" compute in4 3.8 * @ , @ / 3.8 label in5 "-12V (reserved)" compute in5 -@ * 3.97 , -@ / 3.97 label in6 "-5V (reserved)" compute in6 -@ * 1.666 , -@ / 1.666 label temp1 "M/B Temp" label temp2 "CPU Temp (Intel)" label temp3 "Power Temp" label temp4 "CPU Temp (AMD)" label fan1 "CPU Fan" label fan2 "Chassis Fan" label fan3 "Power Fan" chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*" label in0 "V1.5" # AGP on Intel S845WD1-E label in1 "VCore" label in2 "V3.3" label in3 "V5" label in4 "V12" label temp1 "CPU Temp" label temp2 "Board Temp" label temp3 "Remote Temp" label fan1 "CPU_Fan" label pwm1 "CPU_PWM" label pwm2 "Fan2_PWM" label pwm3 "Fan3_PWM" chip "pc87366-*" label in7 "Vsb" label in8 "Vdd" label in9 "Vbat" label in10 "AVdd" compute in7 @*2, @/2 compute in8 @*2, @/2 compute in10 @*2, @/2 set in7_min 3.0 set in7_max 3.6 set in8_min 3.0 set in8_max 3.6 set in10_min 3.0 set in10_max 3.6 label temp1 "CPU0 Temp" label temp1_crit "CPU0 Crit" label temp2 "CPU1 Temp" label temp2_crit "CPU1 Crit" label temp3 "S-IO Temp" label temp3_crit "S-IO Crit" ignore temp4 ignore temp5 ignore temp6 compute temp4 3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \ in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15)))) compute temp5 3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \ in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15)))) compute temp6 3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \ in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15)))) chip "adm1030-*" label temp1 "SYS Temp" label temp2 "CPU Temp" label temp1_crit "SYS Crit" label temp2_crit "CPU Crit" label fan1 "CPU Fan" chip "adm1031-*" label temp1 "SYS Temp" label temp2 "CPU Temp" label temp3 "AUX Temp" label temp1_crit "SYS Crit" label temp2_crit "CPU Crit" label temp3_crit "AUX Crit" label fan1 "CPU Fan" label fan2 "Case Fan" chip "w83l785ts-*" label temp1 "CPU Diode" chip "lm92-*" label temp "CPU Temp" chip "w83627ehf-*" "w83627dhg-*" label in0 "VCore" label in2 "AVCC" label in3 "3VCC" label in7 "VSB" label in8 "VBAT" compute in1 @*(1+(56/10)), @/(1+(56/10)) compute in6 @*(1+(22/10)), @/(1+(22/10)) label fan1 "Case Fan" label fan2 "CPU Fan" label fan3 "Aux Fan" label temp1 "Sys Temp" label temp2 "CPU Temp" label temp3 "AUX Temp" chip "f71805f-*" label in0 "+3.3V" label in1 "Vtt1.2V" label in2 "Vram" label in3 "Vchip" label in4 "+5V" label in5 "+12V" label in6 "Vcc1.5V" label in7 "Vcore" label in8 "5VSB" compute in2 @*(1+100/100), @/(1+100/100) compute in3 @*(1+100/47), @/(1+100/47) compute in4 @*(1+200/47), @/(1+200/47) compute in5 @*(1+200/20), @/(1+200/20) compute in8 @*(1+200/47), @/(1+200/47) set in0_min 3.0 set in0_max 3.6 label fan1 "CPU Fan" label fan2 "Sys Fan" label fan3 "Aux Fan" label temp1 "CPU Temp" label temp2 "Sys Temp" label temp3 "Aux Temp" chip "abituguru-*" label in0 "CPU Core Voltage" label in1 "DDR Voltage" label in2 "DDR VTT Voltage" label in3 "NB Voltage" label in4 "SB Voltage" label in5 "HyperTransport Voltage" label in6 "AGP VDDQ Voltage" label in7 "ATX +5V" compute in7 @*1.788 , @/1.788 label in8 "ATX +3.3V" compute in8 @*1.248 , @/1.248 label in9 "Standby Voltage (+5V)" compute in9 @*1.788 , @/1.788 label in10 "3VDual Voltage" compute in10 @*1.248 , @/1.248 label temp1 "CPU Temperature" label temp2 "SYS Temperature" label temp3 "PWM Temperature" ignore temp4 ignore temp5 ignore temp6 ignore temp7 label fan1 "CPU FAN Speed" label fan2 "NB FAN Speed" label fan3 "SYS FAN Speed" label fan4 "AUX1 FAN Speed" label fan5 "AUX2 FAN Speed" ignore fan6 chip "k8temp-*" label temp1 "Core0 Temp" label temp2 "Core0 Temp" label temp3 "Core1 Temp" label temp4 "Core1 Temp" chip "dme1737-*" label in0 "V5stby" label in1 "Vccp" label in2 "V3.3" label in3 "V5" label in4 "V12" label in5 "V3.3stby" label in6 "Vbat" label temp1 "RD1 Temp" label temp2 "Int Temp" label temp3 "CPU Temp" label fan1 "CPU_Fan" label fan2 "Fan2" label fan3 "Fan3" label fan4 "Fan4" label fan5 "Fan5" label fan6 "Fan6" label pwm1 "CPU_PWM" label pwm2 "Fan2_PWM" label pwm3 "Fan3_PWM" label pwm5 "Fan5_PWM" label pwm6 "Fan6_PWM" chip "f71882fg-*" label temp1 "CPU" label temp2 "System" ignore temp3 label fan1 "CPU" label fan2 "System" label fan3 "Power" label fan4 "Aux" label in0 "3.3V" label in1 "Vcore" label in2 "Vdimm" label in3 "Vchip" label in4 "+5V" label in5 "12V" label in6 "5VSB" label in7 "3VSB" label in8 "Battery" compute in0 (@ * 2), (@ / 2) compute in2 (@ * 2), (@ / 2) compute in3 (@ * 2), (@ / 2) compute in4 (@ * 5.25), (@ / 5.25) compute in5 (@ * 12.83), (@ / 12.83) compute in6 (@ * 5.25), (@ / 5.25) compute in7 (@ * 2), (@ / 2) compute in8 (@ * 2), (@ / 2) chip "adm1022-*" "thmc50-*" label temp "M/B Temp" label remote_temp "CPU Temp" /etc/sensors3.conf chip "lm78-*" "lm79-*" "lm80-*" label temp1 "M/B Temp" chip "w83792d-*" label in0 "VcoreA" label in1 "VcoreB" label in6 "+5V" label in7 "5VSB" label in8 "Vbat" set in6_min 5.0 * 0.90 set in6_max 5.0 * 1.10 set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.0 * 1.10 chip "w83793-*" label in0 "VcoreA" label in1 "VcoreB" label in7 "+5V" label in8 "5VSB" label in9 "Vbat" set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 set in8_min 5.0 * 0.90 set in8_max 5.0 * 1.10 set in9_min 3.0 * 0.90 set in9_max 3.0 * 1.10 chip "via686a-*" label in0 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 chip "adm1025-*" "ne1619-*" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 label temp1 "CPU Temp" label temp2 "M/B Temp" chip "lm87-*" "adm1024-*" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 label temp1 "M/B Temp" label temp2 "CPU Temp" chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*" label in8 "Vbat" chip "fscpos-*" "fscher-*" label in0 "+12V" label in1 "+5V" label in2 "Vbat" label temp1 "CPU Temp" label temp2 "M/B Temp" label temp3 "Aux Temp" chip "fscscy-*" label in0 "+12V" label in1 "+5V" label in2 "+3.3V" label temp1 "CPU0 Temp" label temp2 "CPU1 Temp" label temp3 "M/B Temp" label temp4 "Aux Temp" chip "vt1211-*" label in5 "+3.3V" label temp2 "SIO Temp" chip "vt8231-*" label in5 "+3.3V" chip "smsc47m192-*" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 label temp1 "SIO Temp" chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" "emc6d100-*" "emc6d102-*" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 label temp2 "M/B Temp" chip "pc87365-*" "pc87366-*" label in7 "3VSB" label in8 "VDD" label in9 "Vbat" label in10 "AVDD" compute in7 @*2, @/2 compute in8 @*2, @/2 compute in10 @*2, @/2 set in7_min 3.0 set in7_max 3.6 set in8_min 3.0 set in8_max 3.6 set in10_min 3.0 set in10_max 3.6 label temp3 "SIO Temp" set temp3_min 0 set temp3_max 70 set temp3_crit 85 chip "adm1030-*" "adm1031-*" label temp1 "M/B Temp" chip "w83627ehf-*" "w83627dhg-*" label in0 "Vcore" label in2 "AVCC" label in3 "VCC" label in7 "3VSB" label in8 "Vbat" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 set in7_min 3.3 * 0.90 set in7_max 3.3 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.0 * 1.10 chip "f71805f-*" label in0 "+3.3V" set in0_min 3.3 * 0.90 set in0_max 3.3 * 1.10 chip "f71872f-*" label in0 "+3.3V" label in9 "Vbat" label in10 "3VSB" set in0_min 3.3 * 0.90 set in0_max 3.3 * 1.10 set in9_min 3.0 * 0.90 set in9_max 3.0 * 1.10 set in10_min 3.3 * 0.90 set in10_max 3.3 * 1.10 chip "k8temp-*" label temp1 "Core0 Temp" label temp2 "Core0 Temp" label temp3 "Core1 Temp" label temp4 "Core1 Temp" chip "dme1737-*" label in0 "5VSB" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in0_min 5.0 * 0.90 set in0_max 5.0 * 1.10 set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "sch311x-*" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "sch5027-*" label in0 "5VSB" label in1 "Vcore" label in2 "+3.3V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in0_min 5.0 * 0.90 set in0_max 5.0 * 1.10 set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "f71882fg-*" label in0 "+3.3V" label in7 "3VSB" label in8 "Vbat" compute in0 @*2, @/2 compute in7 @*2, @/2 compute in8 @*2, @/2 chip "f8000-*" label in0 "+3.3V" label in1 "3VSB" label in2 "Vbat" compute in0 @*2, @/2 compute in1 @*2, @/2 compute in2 @*2, @/2 -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo, Am Fre, 09 Jul 2010, Al Bogner schrieb:
schrieb David Haller <dnh@opensuse.org>: Product: "KV7-V(VIA KT600-8237)"
Ah, ok.
Driver `w83627hf': * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9)
Die sensors3?.conf hättest du nicht mailen sollen, die sind überall gleich.
chip "w83782d-*" "w83627hf-*" label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "-12V" label in6 "-5V" label in7 "V5SB" label in8 "VBat" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
Da müßtest du halt noch die Temperaturen ergänzen. -dnh -- "Getting a penguin to pee on demand is _messy_." -- Linus Torvalds -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (2)
-
Al Bogner -
David Haller