könnte mir jemand sagen wie man eine Soundblaster 32 unter Linux zum laufen kriegt(bei,sind alle versuche fehlgeschlagen)

Am 3. Juli habe ich das schon mal beschrieben: --------schnipp---------------------------------------------- Also... im Kernel: # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_PAS is not set CONFIG_SOUND_SB=m CONFIG_SOUND_ADLIB=m # CONFIG_SOUND_GUS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_PSS is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_OPL3SA2 is not set # CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_SOFTOSS is not set CONFIG_SOUND_YM3812=m # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_UART6850 is not set # # Additional low level sound drivers # CONFIG_LOWLEVEL_SOUND=y # CONFIG_ACI_MIXER is not set CONFIG_AWE32_SYNTH=m # CONFIG_AEDSP16 is not set in /etc/conf.modules: #alias char-major-14 off #alias sound off #alias midi off #***************************************************************************** # module : sb.o Soundblaster 16, SB Pro + Clones # Also needed for AWE32/64 # # Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster # and in /usr/src/linux/drivers/sound/sb.c . # # Possible configuration : # alias char-major-14 sb alias midi awe_wave # post-install sb /sbin/modprobe "-k" "adlib_card" post-install awe_wave /usr/local/bin/sfxload /usr/share/synthgm.sbk options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 # options adlib_card io=0x388 # #***************************************************************************** in /sbin/init.d/boot.local: modprobe sb modprobe awe_wave Die /etc/isapnp.conf könnte so aussehen: # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING (CONFIGURE CTL00e4/68273843 (LD 0 (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (SIZE 16) (BASE 0x0220)) (IO 1 (SIZE 2) (BASE 0x0330)) (IO 2 (SIZE 4) (BASE 0x0388)) (NAME "CTL00e4/68273843[0]{Audio}") (ACT Y) )) (CONFIGURE CTL00e4/68273843 (LD 1 # (IO 0 (SIZE 8) (BASE 0x0200)) (NAME "CTL00e4/68273843[1]{Game}") # (ACT Y) )) (CONFIGURE CTL00e4/68273843 (LD 2 (IO 0 (SIZE 4) (BASE 0x0620)) (IO 1 (BASE 0x0A20)) (IO 2 (BASE 0x0E20)) (NAME "CTL00e4/68273843[2]{WaveTable}") (ACT Y) )) (WAITFORKEY) Besser ist natürlich, Du erzeugst sie selber :-) Die Miditools awesfx-0.4.3.tgz und awemidi-0.4.2b-1.i386.rpm findest Du sicherlich irgendwo über "Linux MIDI & Sound": http://www.bright.net/~dlphilp/linuxsound/ Für das kommerzielle OSS/Linux besteht also keine Notwendigkeit! Ich hoffe das hilft Dir weiter ..? --------schnapp---------------------------------------------- Das bezieht sich auf Kernel 2.2.10 und SuSE 6.1. Carsten