Kernel bootet nicht
![](https://seccdn.libravatar.org/avatar/40ed7d34fc73b605768d679de495920e.jpg?s=120&d=mm&r=g)
Hat jemand nen Tip ? Mein neu gebrannter Kernel (2.2.13, SuSE 6.3) bootet nicht mit lilo (auch nicht mit loadlin). der bootvorgang endet immer bei: LILO boot: Loading... "Uncompressing Linux... ok. booting the Kernel" Und das wars dann...die Maschine steht ! Die Festplatte arbeitet noch dabei noch etwa 5-10 s, dann is vorbei !! Ein Standard-Kernel läuft problemlos. Früher selbstgebrannte Kernels (1.2.x - 2.0.x) liefen bis jetzt mit dieser Hardware (Gigabyte Pentium-Motherboard, EIDE-Platten u. CDROM, Diamond 2 MB Grafik, 2x 3C905) immer anstandlos. Das Kernel-brennen muß sein. Der Rechner wird zur Firewall (appl. level gateway). Die Kernel-Optionen werden dabei auf minimal gestellt. Lediglich optionen die absolut notwendig sind wurden gewählt (siehe unten). Kernelgroesse ist 370 KB. Verwendet wird das Paket lx_suse. Wer kann mir helfen ?? Ist es ein PCI-Problem ? Das Verhalten tritt bei zwei unterschiedlichen Rechnern auf. Gruß Thomas Verwendete Kernel-Optionen: # # Automatically generated by make menuconfig: don't edit # # # Language for Kernel Configuration # CONFIG_CONFIGLANG_ENGLISH=y # CONFIG_CONFIGLANG_GERMAN is not set # # Code maturity level options # # CONFIG_EXPERIMENTAL is not set # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M686 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # General setup # # CONFIG_BIGMEM is not set CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_RT is not set # CONFIG_PCI_QUIRKS is not set # CONFIG_PCI_OLD_PROC is not set # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PARPORT is not set # CONFIG_APM is not set # # Plug and Play support # CONFIG_PNP=y # # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_IDECD_SLOTS is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_AEC6210 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_LVM is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_DEV_HD is not set # # Networking options # # CONFIG_PACKET is not set # CONFIG_NETLINK is not set # CONFIG_FIREWALL is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_ALIAS=y CONFIG_SYN_COOKIES=y # CONFIG_INET_RARP is not set CONFIG_SKB_LARGE=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # # SCSI support # # CONFIG_SCSI is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # CONFIG_ARCNET=m # CONFIG_ARCNET_ETH is not set # CONFIG_ARCNET_1051 is not set # CONFIG_ARCNET_COM90xx is not set # CONFIG_ARCNET_COM90xxIO is not set # CONFIG_ARCNET_RIM_I is not set # CONFIG_ARCNET_COM20020 is not set CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set # CONFIG_NET_SB1000 is not set # CONFIG_PPPOX is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_BC90X=y # CONFIG_VORTEX is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_RADIO is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Filesystems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_NFS_FS is not set # CONFIG_SUNRPC is not set # CONFIG_LOCKD is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
![](https://seccdn.libravatar.org/avatar/76dfb043cb4021683f26faff9dd99c54.jpg?s=120&d=mm&r=g)
Thomas Ehweiner wrote:
Hat jemand nen Tip ?
Mein neu gebrannter Kernel (2.2.13, SuSE 6.3) bootet nicht mit lilo (auch nicht mit loadlin). der bootvorgang endet immer bei:
LILO boot: Loading... "Uncompressing Linux... ok. booting the Kernel"
im normalfall liegt daß daran, daß du kein PCI-Support (oder sonstwas was vor dem Booten gebraucht wird) nicht einkompiliert hast
Und das wars dann...die Maschine steht ! Die Festplatte arbeitet noch dabei noch etwa 5-10 s, dann is vorbei !!
und wenn du den Kernel auf eine Diskette dd'st (dd if=kernel of=/dev/fd0 bs=512)???
Ein Standard-Kernel läuft problemlos. Früher selbstgebrannte Kernels (1.2.x - 2.0.x) liefen bis jetzt mit dieser Hardware (Gigabyte Pentium-Motherboard, EIDE-Platten u. CDROM, Diamond 2 MB Grafik, 2x 3C905) immer anstandlos.
Villeicht doch eine Option aus versehen wegselektiert? Das ist auch mir mal passiert und hatte das gleiche ergbenis...
Das Kernel-brennen muß sein. Der Rechner wird zur Firewall (appl. level gateway). Die Kernel-Optionen werden dabei auf minimal gestellt. Lediglich optionen die absolut notwendig sind wurden gewählt (siehe unten). Kernelgroesse ist 370 KB.
Da siehst du. Vielleicht ist eine Option dir unwihtig erschienen
Verwendet wird das Paket lx_suse.
Wer kann mir helfen ?? Ist es ein PCI-Problem ? Das Verhalten tritt bei zwei unterschiedlichen Rechnern auf.
Ich tippe auf PCI, das Problem hatte ich nämlich auch. Du hast bestimmt vergessen es einzubauen
# # Automatically generated by make menuconfig: don't edit #
# # Language for Kernel Configuration # CONFIG_CONFIGLANG_ENGLISH=y # CONFIG_CONFIGLANG_GERMAN is not set
# # Code maturity level options # # CONFIG_EXPERIMENTAL is not set
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M686 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y
# # General setup # # CONFIG_BIGMEM is not set CONFIG_NET=y CONFIG_PCI=y
also PCI ist drin
# CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_RT is not set # CONFIG_PCI_QUIRKS is not set # CONFIG_PCI_OLD_PROC is not set # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PARPORT is not set # CONFIG_APM is not set
# # Plug and Play support # CONFIG_PNP=y
# # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_IDECD_SLOTS is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_RZ1000 is not set
Vielleicht liegt es bei den Beiden? Bei mir geht es auch ohne CONFIG_BLK_DEV_CMD640 nicht
CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_AEC6210 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_LVM is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # # CONFIG_PACKET is not set # CONFIG_NETLINK is not set # CONFIG_FIREWALL is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_ALIAS=y CONFIG_SYN_COOKIES=y # CONFIG_INET_RARP is not set CONFIG_SKB_LARGE=y # CONFIG_IPX is not set # CONFIG_ATALK is not set
# # SCSI support # # CONFIG_SCSI is not set
Villeicht hast du SCSI hardware und keinen Treiber drin (hast ja nicht erwähnt)
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # CONFIG_ARCNET=m # CONFIG_ARCNET_ETH is not set # CONFIG_ARCNET_1051 is not set # CONFIG_ARCNET_COM90xx is not set # CONFIG_ARCNET_COM90xxIO is not set # CONFIG_ARCNET_RIM_I is not set # CONFIG_ARCNET_COM20020 is not set CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set # CONFIG_NET_SB1000 is not set # CONFIG_PPPOX is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_BC90X=y # CONFIG_VORTEX is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_RADIO is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Filesystems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_NFS_FS is not set # CONFIG_SUNRPC is not set # CONFIG_LOCKD is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set
--------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
cu RvB -- Pro-Linux -- Rene van Bevern HomePage : http://neptune.spaceports.com/~rvb Pro-Linux: http://www.pro-linux.de _,-'-,_,-'-,_,-'-,_,-'-,_,-'-,_,-'-,_,-'-,_,-'-,_ --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (2)
-
RvB@pro-linux.de
-
tehweiner@gmx.net