Sorry, muß mich korrigieren. Steht auch Inetd drinne. -- ---------------------------------------------------- Was nicht fliegen kann, stürzt auch nicht ab....... Stefan Eggert - ICQ UIN: 117498296 ----------------------------------------------------

Matthias Strack schrieb:

At 10:47 18.04.2002 +0200, Stefan Eggert wrote:

...

Sorry, muß mich korrigieren. Steht auch Inetd drinne.

Na anscheinend nicht:

Apr 18 10:19:50 pc-websrv01 proftpd[13598]: pc-websrv01.netz - ProFTPD 1.2.2 standalone mode SHUTDOWN

sonst würde da nicht standalone stehen ;)

Da stehts nochmal ;-) ServerName "powered by SuSE Linux" ServerType inetd #ServerType standalone ServerAdmin ftpadm@localhost

Hi! Hier die Proftpd.conf. In /usr/local/etc steht nichts, ist ein leeres verzeichnis. Wen nich den Server auf Standalone stelle, klappt er ja. Nur aus der Inetd net. Alle Eintäge sind genau wie bei Dir. # This is a basic ProFTPD configuration file. It establishes a single # server and a single anonymous login. It assumes that you have a # user/group "nobody"/"nogroup" for normal operation and anon. # !!! PLEASE read the documentation of proftpd !!! # # You can find the documentation in /usr/doc/packages/proftpd/, # http://www.proftpd.org/ and don't forget to read carefully # and _follow_ hints on http://www.proftpd.net/security.html. ServerName "powered by SuSE Linux" ServerType inetd #ServerType standalone ServerAdmin ftpadm@localhost MasqueradeAddress seggert.d2g.com # # uncomment, if you want to hide the servers name: # ServerIdent on "pc-websrv01 - Location Germany. Wellcome" DeferWelcome off DefaultServer on # Enable PAM for authentication... # AuthPAM on # Setting this directive to on will cause authentication to fail # if PAM authentication fails. The default setting, off, allows # other modules and directives such as AuthUserFile and friends # to authenticate users. # #AuthPAMAuthoritative off # This directive allows you to specify the PAM service name used # in authentication (default is "proftpd" on SuSE Linux). # You have to setup the service in the /etc/pam.d/. # AuthPAMConfig proftpd # Port 21 is the standard FTP port. Port 21 # disable listen on 0.0.0.0:21 - the port (and IP) should # be specified explicitly in each VirtualHost definition # #Port 0 # listen for each (additional) address explicitly that is # specified (via Bind and Port) in a VirtualHost definition # #SocketBindTight on # Umask 022 is a good standard umask to prevent new dirs # and files from being group and world writable. Umask 022 # Set the user and group that the server normally runs at. User nobody Group nogroup # Normally, we want files to be overwriteable. AllowOverwrite on HiddenStor on #HideNoAccess on </Directory> # protect .ftpaccess and similar - see also PathDenyFilter # # <Limit ALL> # DenyAll # IgnoreHidden on # </Limit> #</Directory> # It is a very good idea to allow only filenames containing normal # alphanumeric characters for uploads (and not shell code...); # see also the PathDenyFilter option #PathAllowFilter ".*/[a-zA-Z0-9]+$" #PathAllowFilter ".*/[a-zA-Z0-9~ \*\/,_.-]+$" # Do not allow to pass printf-Formats (see also AllowFilter option): DenyFilter "%" # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Performance: skip DNS resolution when we process the logs... #UseReverseDNS off # Turn off Ident lookups IdentLookups off # Set the maximum number of seconds a data connection is allowed # to "stall" before being aborted. #TimeoutStalled 300 # Where do we put the pid files? ScoreboardPath /var/run/proftpd # # Logging options # TransferLog /var/log/xferlog # Some logging formats # #LogFormat default "%h %l %u %t \"%r\" %s %b" #LogFormat auth "%v [%P] %h %t \"%r\" %s" #LogFormat write "%h %l %u %t \"%r\" %s %b" # Log file/dir access #ExtendedLog /var/log/proftpd.access_log WRITE,READ write # Record all logins #ExtendedLog /var/log/proftpd.auth_log AUTH auth # do not change root if the user is also in the users group... # #DefaultRoot ~/public_html public,!users DefaultRoot ~ # Limit login attempts #MaxLoginAttempts 3 # Users needs a valid shell #RequireValidShell yes # # Use special Auth files instead.... # #AuthUserFile /var/proftpd/authfiles/passwd #AuthGroupFile /var/proftpd/authfiles/group # # Use LDAP server - see README.LDAP # #LDAPServer "localhost" #LDAPPrefix "dc=your,dc=domain,dc=top" #LDAPDN "cn=YourDNUser,dc=your,dc=domain,dc=top" #LDAPDNPass "YourDNUserPassword" # The ratio directives take four numbers: file ratio, initial file # credit, byte ratio, and initial byte credit. Setting either ratio # to 0 disables that check. # # The directives are HostRatio (matches FQDN -- wildcards are allowed # in this one), AnonRatio (matches password entered in an anon login, # usually an email address), UserRatio (accepts "*" for 'any user'), # and GroupRatio. Matches are looked for in that order. # # Some examples: # # Ratios on # enable module # UserRatio ftp 0 0 0 0 # HostRatio anyhost.domain.top 0 0 0 0 # leech access (default) # GroupRatio proftpd 100 10 5 100000 # 100:1 files, 10 file cred # AnonRatio auser@domain.top 1 0 1 0 # 1:1 ratio, no credits # UserRatio * 5 5 5 50000 # special default case # # Setting "Ratios on" without configuring anything else will enable # leech mode: it logs activity and sends status messages to the ftp # client, but doesn't restrict traffic. # # uncomment for anonymous...: # # # # After anonymous login, daemon runs as: # User ftp # Group public # # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # # Limit the maximum number of# # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin msgs/welcome.msg # DisplayFirstChdir .message # # # Deny write operations to all directories, underneath root-dir # # Default is to allow, so we don't need a <Limit> for read operations. # # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # # Only uploads into incomming directory are allowed... # #<Directory incoming> # # # # Umask 017 # # # # # ... so deny read/write # # <Limit READ WRITE DIRS> # # DenyAll # # </Limit> # # # # # ... allow file storing, but not other writes # # <Limit STOR CWD CDUP> # # AllowAll # # </Limit> # # # #</Directory> # #</Anonymous> ~ ~ ~ ~ anonymous logins # MaxClients 10 # # Paranoia logging level.... ##ExtendedLog /var/log/proftpd.paranoid_log ALL default # ---------------------------------------------------- Was nicht fliegen kann, stürzt auch nicht ab....... Stefan Eggert - ICQ UIN: 117498296 ----------------------------------------------------