AW: Scanner-SCSI Karte laeuft!
Hallo Uli!
Hast Du diese Ressourcen fuer die Karte ueber isapnp zugewiesen? Ja, hab ich. Ich habe den Vorschlag, IRQ 4 zu benutzen abgelehnt und in IRQ 3 geändert, da auf IRQ 3 meine PCI-Netzwerkkarte liegt. Ich habe jetzt aber wieder IRQ 4 eingetragen.
fertig hast!!) und sieh Dir deren Inhalt an (Wird die Karte erkannt? Welche Adressen / IRQs werden vorgeschlagen?). IRQ 4,I/O 0x220
die Meldungen in xterm oder kvt, wenn Du daraus xscanimage aufrufst. Dort sollte naemlich zu sehen sein, ob sane den Scanner nun findet. Wenn ich in xterm 'xscanimage' eintippe, bekomme ich keine Rückmeldung, d.h. es kommt die Bash wenn ich nach einer Zeit mit CTRL+C abbreche.
Und nochmals: Geduld bei geladenem SCSI-Modul, xscanimage braucht dann laenger fuer den Start. Ich habe 15 min gewartet; sollte doch reichen, oder?!
belegt ist. Eventuell ist es ein abgebrochenes xscanimage, das Du waehrend der Erkennungsphase mit ctrl+c abgeschossen hast. Also, die Ausgabe von ps deutet nicht darauf hin...
Ich habe aber beim warten folgende Fehlermeldung in /var/log/messages sehen können: Jan 14 17:27:22 Linux_PII kernel: scsi1 : at port 0x220 irq 4 options CAN_QUEUE=16 CMD_PER_LUN=2 release=1 generic options AUTOPROBE_IRQ AUTOSENSE USLEEP, USLEEP_POLL=1 USLEEP_SLEEP=20 generic release=7 Jan 14 17:27:22 Linux_PII kernel: scsi1 : Generic NCR5380/53C400 Driver Jan 14 17:27:22 Linux_PII kernel: scsi : 2 hosts. Jan 14 17:27:39 Linux_PII kernel: scsi : 1 host. Jan 14 17:27:46 Linux_PII kernel: scsi1 : at port 0x220 irq 4 options CAN_QUEUE=16 CMD_PER_LUN=2 release=1 generic options AUTOPROBE_IRQ AUTOSENSE USLEEP, USLEEP_POLL=1 USLEEP_SLEEP=20 generic release=7 Jan 14 17:27:46 Linux_PII kernel: scsi1 : Generic NCR5380/53C400 Driver Jan 14 17:27:46 Linux_PII kernel: scsi : 2 hosts. Jan 14 17:27:46 Linux_PII kernel: Vendor: UMAX Model: Astra 1200S Rev: V1.1 Jan 14 17:27:46 Linux_PII kernel: Type: Scanner ANSI SCSI revision: 02 Jan 14 17:27:46 Linux_PII kernel: Detected scsi generic sgb at scsi1, channel 0, id 0, lun 0 Jan 14 17:30:00 Linux_PII /USR/SBIN/CRON[344]: (root) CMD (make -s -C /var/yp) Jetzt geht's los: Jan 14 17:38:04 Linux_PII kernel: scsi : aborting command due to timeout : pid 43, scsi1, channel 0, id 0, lun 0 Read (10) 00 82 00 00 00 00 00 1f 00 Jan 14 17:38:04 Linux_PII kernel: scsi1 : aborting command Jan 14 17:38:04 Linux_PII kernel: scsi1 : destination target 0, lun 0 Jan 14 17:38:04 Linux_PII kernel: command = Read (10) 00 82 00 00 00 00 00 1f 00 Jan 14 17:38:04 Linux_PII kernel: NCR5380 : coroutine isn't running. Jan 14 17:38:04 Linux_PII kernel: STATUS_REG: 45 ,PARITY,BSY,IO Jan 14 17:38:04 Linux_PII kernel: BASR: 00 Jan 14 17:38:04 Linux_PII kernel: ICR: 00 Jan 14 17:38:04 Linux_PII kernel: MODE: 00 Jan 14 17:38:04 Linux_PII kernel: scsi1 : REQ not asserted, phase unknown. Jan 14 17:38:04 Linux_PII kernel: Jan 14 17:38:04 Linux_PII kernel: NCR5380 core release=7. Generic5380 release 1 Jan 14 17:38:04 Linux_PII kernel: Base Addr: 0x00000 io_port: 0220 IRQ: 4. Jan 14 17:38:04 Linux_PII kernel: NCR5380 : coroutine isn't running. Jan 14 17:38:04 Linux_PII kernel: scsi1 : destination target 0, lun 0 Jan 14 17:38:04 Linux_PII kernel: command = 40 (0x28)00 82 00 00 00 00 00 1f 00 Jan 14 17:38:04 Linux_PII kernel: scsi1: issue_queue Jan 14 17:38:04 Linux_PII kernel: scsi1: disconnected_queue Jan 14 17:38:04 Linux_PII kernel: Jan 14 17:38:04 Linux_PII kernel: scsi1 : aborting command Jan 14 17:38:04 Linux_PII kernel: scsi1 : destination target 0, lun 0 Jan 14 17:38:04 Linux_PII kernel: command = Read (10) 00 82 00 00 00 00 00 1f 00 Jan 14 17:38:04 Linux_PII kernel: NCR5380 : coroutine isn't running. Jan 14 17:38:04 Linux_PII kernel: STATUS_REG: 45 ,PARITY,BSY,IO Jan 14 17:38:04 Linux_PII kernel: BASR: 00 Jan 14 17:38:04 Linux_PII kernel: ICR: 00 Jan 14 17:38:04 Linux_PII kernel: MODE: 00 Jan 14 17:38:04 Linux_PII kernel: scsi1 : REQ not asserted, phase unknown. Jan 14 17:38:04 Linux_PII kernel: Jan 14 17:38:04 Linux_PII kernel: NCR5380 core release=7. Generic5380 release 1 Jan 14 17:38:04 Linux_PII kernel: Base Addr: 0x00000 io_port: 0220 IRQ: 4. Jan 14 17:38:04 Linux_PII kernel: NCR5380 : coroutine isn't running. Jan 14 17:38:04 Linux_PII kernel: scsi1 : destination target 0, lun 0 Jan 14 17:38:04 Linux_PII kernel: command = 40 (0x28)00 82 00 00 00 00 00 1f 00 Jan 14 17:38:04 Linux_PII kernel: scsi1: issue_queue Jan 14 17:38:04 Linux_PII kernel: scsi1: disconnected_queue Kannst Du damit was anfagen? Vielen Dank für Deine Bemühungen! Ciao, Meini. -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux
participants (1)
-
meinhard.schneider@gus.de