Hallo David,
hier Nachtrag zu meiner Mail von vorhin (19:30:58 h):
Am 15.07.02, 16:32:02, schrieb David Haller
On Sun, 14 Jul 2002, Bernd Stäglich wrote:
Am 14.07.02, 22:22:55, schrieb David Haller
Lass doch bitte mal den ganzen GUI-Krempel (also KonCD) weg und nimm cdrecord usw.
Audio-CDs kannst du mit cdda2wav oder cdparanoia (und ein paar anderen Tools) auslesen, in ein oder meherere .wavs, die du dann mit cdrecord wieder als tracks brennen kannst...
noch mal zur Infromation: meine Gerätenrn sind jetzt: cdrecorder=hdc=sr0=scd0 sowie cdrom=hdd=sr1=scd1, jeweils mit Links auf /dev/cdrecorder und /dev/cdrom. Einmal hat xcdroast gut alles (!) durchgezogen. Nach dem Einsatz von KonCD (was natürlich schon wieder nicht funktionierte), funktionierte dann auch xcdroast nicht mehr und jetzt auch nicht mal mehr cdrecord auf der Konsole! Du hast doch dir englische Fehlermeldungen gewünscht. Nachfolgend jetzt das gesamte Protokoll vom (nicht gelungenen 'Brennen' über xcdroast uund direkt über die Konsole. Kannst du (oder jemand anders von der Liste) was mit den Protokollmeldungen anfangen und mir sagen, wo's bei cdrecord plötzlich hakt? Bin jetzt endgültig ziemlich ratlos! Bei meinen noch nicht beantworteten Fragen der Mail hätte ich auch gern noch mal Rat. So und nun die Protokolle Ciao /Bernd Brenntest über Konsole: /test/brenner> cdrecord -v speed=24 dev=0,0,0 -pad -audio audio.wav Cdrecord 1.11a19 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 0 = CD-DA scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.22 Using libscg version 'schily-0.6' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W2410A' Revision : '1.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 2394336 = 2338 KB FIFO size : 4194304 = 4096 KB Track 01: audio 34 MB (03:26.00) no preemp Total size: 34 MB (03:26.00) = 15450 sectors Lout start: 34 MB (03:28/00) = 15450 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11077 (97:34/23) ATIP start of lead out: 336075 (74:43/00) speed low: 4 speed high: 8 power mult factor: 2 6 recommended erase/write power: 5 A2 values: 14 A4 4A Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Trying to clear drive status. cdrecord: Drive needs to reload the media to return to proper status. Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1151280 Starting to write CD/DVD at speed 10 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 240s Writing time: 11.304s Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 480s cmd finished after 0.000s timeout 480s Fixating time: 0.001s cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. Brenntest über xcdroast: Calling: /usr/X11R6/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" fs=4096k driveropts=burnproof -v -useinfo speed=24 -dao -eject -pad -audio "/home/<user>/test/brenner/audio.wav" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.22 pregap1: -1 Cdrecord 1.11a19 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 0 = CD-DA Using libscg version 'schily-0.6' Driveropts: 'burnproof' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W2410A' Revision : '1.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 2394336 = 2338 KB FIFO size : 4194304 = 4096 KB cdrecord: Drive needs to reload the media to return to proper status. Track 01: audio 34 MB (03:26.00) no preemp Total size: 34 MB (03:26.00) = 15450 sectors Lout start: 34 MB (03:28/00) = 15450 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11077 (97:34/23) ATIP start of lead out: 336075 (74:43/00) speed low: 4 speed high: 8 power mult factor: 2 6 recommended erase/write power: 5 A2 values: 14 A4 4A Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Trying to clear drive status. Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1151280 Starting to write CD/DVD at speed 10 in write mode for single session. ##########0 seconds. Operation starts. Waiting for reader process to fill input buffer ... cdrecord: Turning BURN-Free on input buffer ready. BURN-Free is OFF. Performing OPC... Sending CUE sheet... cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 240s cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 2 at -150 cdrecord: Input/output error. write_g1: scsi sendcmd: no error write track pad data: error after 0 bytes CDB: 2A 00 FF FF FF 6A 00 00 1B 00 BFree: 2338 K BSize: 2338 K status: 0x2 (CHECK CONDITION) Starting new track at sector: 0 Sense Bytes: F0 00 05 00 00 11 94 0A 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 4500 (valid) cmd finished after 6.746s timeout 200s cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 07 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x07 (write error - recovery needed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 0 bytes cdrecord: Input/output error. flush cache: scsi sendcmd: no error Writing time: 23.000s CDB: 35 00 00 00 00 00 00 00 00 00 Fixating... status: 0x2 (CHECK CONDITION) Trouble flushing the cache Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Fixating time: 0.001s Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s
participants (1)
-
Bernd Stäglich