Hallo Liste, warum, weiss ich nicht. Aber das booten dauert etwas zu lange und am Anfang sieht man das hier. Liegt es an der Festplatte?: <3>[ 21.704030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen <3>[ 21.704209] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in <3>[ 21.704210] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 <3>[ 21.704211] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <3>[ 21.704721] ata2.00: status: { DRDY } <6>[ 21.704812] ata2: hard resetting link <6>[ 22.162025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>[ 22.166236] ata2.00: configured for UDMA/33 <6>[ 22.166884] ata2: EH complete <4>[ 42.704017] ata2: limiting SATA link speed to 1.5 Gbps <3>[ 42.704021] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen <3>[ 42.704196] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in <3>[ 42.704197] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 <3>[ 42.704198] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <3>[ 42.704699] ata2.00: status: { DRDY } <6>[ 42.704789] ata2: hard resetting link <6>[ 43.162021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <6>[ 43.166847] ata2.00: configured for UDMA/33 <6>[ 43.167230] ata2: EH complete <4>[ 63.704018] ata2.00: limiting speed to UDMA/25:PIO4 <3>[ 63.704021] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen <3>[ 63.704196] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in <3>[ 63.704197] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 <3>[ 63.704199] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <3>[ 63.704700] ata2.00: status: { DRDY } <6>[ 63.704790] ata2: hard resetting link <6>[ 64.162022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) <6>[ 64.166848] ata2.00: configured for UDMA/25 <6>[ 64.167230] ata2: EH complete <4>[ 84.704017] ata2.00: limiting speed to PIO4 <3>[ 84.704021] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen <3>[ 84.704195] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in <3>[ 84.704197] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 <3>[ 84.704198] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <3>[ 84.704699] ata2.00: status: { DRDY } von 21.xxxxxx zu 42.xxxxxx zu 63.xxxxxx zu 84.xxxxxx huepft OpenSuSE sehr langsam. Ich schaetze jeder Huepfer dauert 30 Sekunden. Warum ist das so ??? Wird die Festplatte nicht richtig unterstuetzt ??? Was kann ich machen um das zu beschleunigen ??? Fuer Erklaerung besten Dank. Gruss. Val. cv.schmitt@gmail.com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org