Xine: Start von DVD nicht möglich
Hallo zusammen ... ich habe unter Suse 8.0 (KDE 3.0.1) über Yast2 xine installiert und die entsprechenden Rechte für den Benutzer vergeben (Lesen + Ausführen). Das Abspielen von DVDs ist jedoch nicht möglich. Ausser einem schwarzen Video-Output passiert nach Anwahl und Start der DVD nichts. Nach längerer Hilfesuche in HowTos und FAQs komme ich jetzt leider nicht mehr weiter. Könnt Ihr mir bitte weiterhelfen? Vielen Dank im voraus. André -- André Kunzelmann taiko@bushi-do.de - http://www.bushi-do.de/
Am Samstag, 8. Juni 2002 02:59 schrieb André Kunzelmann:
ich habe unter Suse 8.0 (KDE 3.0.1) über Yast2 xine installiert und die entsprechenden Rechte für den Benutzer vergeben (Lesen + Ausführen). Das Abspielen von DVDs ist jedoch nicht möglich. Ausser einem schwarzen Video-Output passiert nach Anwahl und Start der DVD nichts.
Welche xine-Version ist es denn (aktuell ist 0.9.10)? Welches Plugin verwendest Du zum abspielen der DVD (das beiliegende DVD Modul kann nur unverschlüsselte DVDs abspielen)? Welche Fehlermeldung erscheint, wenn Du xine von der Konsole aus startest? Schon mal die Version von meiner Homepage versucht? Dort liegen auch die nötigen dvdcss und dvdread libraries und plugins für verschlüsselte DVDs. -- Machs gut | http://www.iiv.de/schwinde/buerger/tremmel/ Manfred | http://www.knightsoft-net.de
Am Samstag, 8. Juni 2002 04:31 schrieb Manfred Tremmel:
Welche xine-Version ist es denn (aktuell ist 0.9.10)? Welches Plugin verwendest Du zum abspielen der DVD (das beiliegende DVD Modul kann nur unverschlüsselte DVDs abspielen)?
Hallo .... ich habe es mittlerweile mit der Version von Deiner Homepage ausprobiert. Ich habe alle Pakete (Source-RPM) mit 'rpm -i [FILE]' installiert. Ich kann dann das Programm starten.
Welche Fehlermeldung erscheint, wenn Du xine von der Konsole aus startest?
Der Aufruf 'xine' (oder 'xine dvd://VTS_01_1.VOB') in der Konsole erzeugt keine Fehlermeldung. Das Programm startet und es erscheint das xine-Logo im Video-Output-Fenster. Ich wähle danach das DVD-Laufwerk an File sowieso und betätige die Start-Taste. Danach verschwindet das xine-Logo im Output-Fenster und es bleibt schwarz. Da ich noch sehr wenig Ahnung habe, gehe ich davon aus, dass ich bei der Installation vielleicht etwas falsch mache. Nachdem ich die heruntergeladenen Dateien mit 'rpm -i' installiert habe, müßte es doch funktionieren? Die Software startet ja schließlich auch. Oder muss ich ppc und i686 Dateien auch noch installieren (ich glaube nicht)? -- André Kunzelmann taiko@bushi-do.de - http://www.bushi-do.de/
Am Samstag, 8. Juni 2002 19:43 schrieb André Kunzelmann:
ich habe es mittlerweile mit der Version von Deiner Homepage ausprobiert. Ich habe alle Pakete (Source-RPM) mit 'rpm -i [FILE]' installiert. Ich kann dann das Programm starten.
Die Source-RPMs mit rpm -i zu installieren ergiebt noch keine lauffähige Version, sondern nur installierte Source-files auf der Platte. Wenn, dann musst Du die neu compilieren mit 'rpm --rebuild [FILE]'. Wenn Du das nicht willst, lösch /usr/src/packages/SOURCES/* und /usr/src/packages/SPECS/* und hol Dir die anderen Pakete.
Der Aufruf 'xine' (oder 'xine dvd://VTS_01_1.VOB') in der Konsole erzeugt keine Fehlermeldung. Das Programm startet und es erscheint das xine-Logo im Video-Output-Fenster. Ich wähle danach das DVD-Laufwerk an File sowieso und betätige die Start-Taste. Danach verschwindet das xine-Logo im Output-Fenster und es bleibt schwarz.
Das DVD-Plugin kann keine verschlüsselten DVDs wiedergeben, Du brauchst eines der anderen vier Plugins d4d, d5d, dmd oder dvdnav, damit Du verschlüsselte DVDs schaun kannst (und die libdvdcss und libdvdread).
Da ich noch sehr wenig Ahnung habe, gehe ich davon aus, dass ich bei der Installation vielleicht etwas falsch mache. Nachdem ich die heruntergeladenen Dateien mit 'rpm -i' installiert habe, müßte es doch funktionieren? Die Software startet ja schließlich auch.
Nein, Source-RPMs bringen dich nur vorwärts, wenn Du selbst compilieren willst.
Oder muss ich ppc und i686 Dateien auch noch installieren (ich glaube nicht)?
Doch, die i686 Pakete enthalten ausführbare Programme und Bibliotheken für Prozessoren ab dem PentiumPro (also alles was >= 200 MHz hat und Intelcomptibel ist, auch AMD, VIA oder sonstwas, solange mit MMX). Die ppc Pakete enthalten ausführbare Programme und Bibliotheken für PowerPC basierende Computer (also primär Apple PowerMacs), die werden Dir vermutlich nichts bringen. -- Machs gut | http://www.iiv.de/schwinde/buerger/tremmel/ Manfred | http://www.knightsoft-net.de
Am Samstag, 8. Juni 2002 22:02 schrieb Manfred Tremmel:
Die Source-RPMs mit rpm -i zu installieren ergiebt noch keine lauffähige Version, sondern nur installierte Source-files auf der Platte. Wenn, dann musst Du die neu compilieren mit 'rpm --rebuild [FILE]'. Wenn Du das nicht willst, lösch /usr/src/packages/SOURCES/* und /usr/src/packages/SPECS/* und hol Dir die anderen Pakete.
Hallo ... ich bin diesen Anweisungen gefolgt und habe mir alle i686-Pakete heruntergeladen. Beim Aufruf von 'rpm -i xine-lib1-0.9.10-2.i868.rpm' kommt dann folgende Fehlermeldung und das Paket wird nicht installiert: error: failed dependencies: libXv.so.1 is needed by xine-lib1-0.9.10-2 libXxf86dga.so.1 is needed by xine-lib1-0.9.10-2 libXxf86vm.so.1 is needed by xine-lib1-0.9.10-2 libxvidcore.so is needed by xine-lib1-0.9.10-2 Was hat das jetzt zu bedeuten? Fehlen mir da die aufgeführten libs? Wo bekomme ich die dann wiederum her. Ich habe mal gesucht, konnte aber nichts finden. Das der Umstieg von Win auf Lin Probleme mit sich bringt, habe ich erwartet, aber dass ich es nicht einmal schaffe ein Programm zu installieren, hätte ich nicht gedacht :-( Wäre sehr nett, wenn mir da nochmals jemand helfen könnte. Danke im voraus ... André -- André Kunzelmann taiko@bushi-do.de - http://www.bushi-do.de/
Hallo, at Sun, 9 Jun 2002 13:08:02 +0200 André Kunzelmann wrote:
Beim Aufruf von 'rpm -i xine-lib1-0.9.10-2.i868.rpm' kommt dann folgende Fehlermeldung und das Paket wird nicht installiert:
error: failed dependencies: libXv.so.1 is needed by xine-lib1-0.9.10-2 libXxf86dga.so.1 is needed by xine-lib1-0.9.10-2 libXxf86vm.so.1 is needed by xine-lib1-0.9.10-2 libxvidcore.so is needed by xine-lib1-0.9.10-2
Was hat das jetzt zu bedeuten? Fehlen mir da die aufgeführten libs?
Genau das heisst es.
Wo bekomme ich die dann wiederum her.
<schussinsblaue> Sieht mir nach XFree Libs aus. </schussinsblaue>
Ich habe mal gesucht, konnte aber nichts finden.
Bei mir liegen ähnliche Libs in /usr/X11R6/lib rum. Gruß Michael -- Homepage http://macbyte.info/ | Registered Linux User #228306 Phone/Fax +49 7000 MACBYTE | http://counter.li.org GNU GPG-Key ID 0140F88B | ICQ #151172379 +Webdesign #Don't send HTML coded Mails# PHP Development+
Am Sonntag, 9. Juni 2002 13:08 schrieb André Kunzelmann:
xine-lib1-0.9.10-2.i868.rpm' kommt dann folgende Fehlermeldung und das Paket wird nicht installiert:
error: failed dependencies: libXv.so.1 is needed by xine-lib1-0.9.10-2 libXxf86dga.so.1 is needed by xine-lib1-0.9.10-2 libXxf86vm.so.1 is needed by xine-lib1-0.9.10-2 libxvidcore.so is needed by xine-lib1-0.9.10-2
Hallo, ich hatte das gleiche Problem. Die fehlenden libs werden vom Paket "XFree86-combat-libs" zur Verfügung gestellt. Gruss Holger
Hallo Andre, André Kunzelmann wrote on Sonntag, 9. Juni 2002 13:08 about Re: Xine: Start von DVD nicht möglich:
ich bin diesen Anweisungen gefolgt und habe mir alle i686-Pakete heruntergeladen. Beim Aufruf von 'rpm -i xine-lib1-0.9.10-2.i868.rpm' kommt dann folgende Fehlermeldung und das Paket wird nicht installiert:
error: failed dependencies: libXv.so.1 is needed by xine-lib1-0.9.10-2 libXxf86dga.so.1 is needed by xine-lib1-0.9.10-2 libXxf86vm.so.1 is needed by xine-lib1-0.9.10-2 libxvidcore.so is needed by xine-lib1-0.9.10-2
Was hat das jetzt zu bedeuten? Fehlen mir da die aufgeführten libs?
Genau: Die ersten drei gehören zum Paket xshared, das Du auf Deiner SuSE finden müßtest. Das letzte zu xvid, ich habe es von der Quelle, von der ich auch meinen xine immer hole. Wenn Du solche Dateien suchst, kannst Du ja einfach erstmal Deine SuSE-CD nehmen. Nimm z. B. den mc als Dateimanager und schaue Dir damit die Datei archives.gz im Hauptverzeichnis der CD an. Mit F7 gibst Du die gewünschte Datei als Suchbegriff ein. Wenn eine solche Datei auf der SuSE enthalten ist, springt der mc Dateiviewer auf die datei. Nun blätterst Du ein wenig zurück, bis der Name des Paketes erscheint. Was nicht auf der SuSE enthalten ist, mußt Du Dir dann im Netz besorgen.
Wo bekomme ich die dann wiederum her. Ich habe mal gesucht, konnte aber nichts finden. Das der Umstieg von Win auf Lin Probleme mit sich bringt, habe ich erwartet, aber dass ich es nicht einmal schaffe ein Programm zu installieren, hätte ich nicht gedacht :-(
Lernt man alles. Es ist unter Linux anders als unter Win. Bei Linux bringt ein Anwendungsprogramm nicht allgemeine Bibliotheken mit. IMHO hat das auch gravierende Nachteile, wie man unter Win immer wieder erleben darf.
Wäre sehr nett, wenn mir da nochmals jemand helfen könnte.
Hier wird jedem geholfen. :-)) [Werbung on] :-))))))) Hier hole ich immer meine Xine-Pakete und alles was man dazu braucht: http://cambuca.ldhs.cetuc.puc-rio.br/~jcm/skyblade/ier wird jedem geholfen. [Werbung off] -- Gruss Marcus Marcus Roeckrath -- Vikarsbusch 8 -- D-48308 Senden -- Germany Phone : +49-2536-9944 -- Mailer/BBS/Fax : +49-2536-9943 (V34, X75) FidoNet: 2:2449/523 E-Mail : marcus.roeckrath@gmx.de WWW : http://home.foni.net/~marcusroeckrath/
participants (5)
-
André Kunzelmann
-
Holger Karcher
-
Manfred Tremmel
-
Marcus Roeckrath
-
Michael Raab