Hi nochmal, ich hatte gestern gepostet, daß ich keine Module laden könne, weil das Device (ISDN, SOUND) busy ist. Ohne etwas zu tun erhalte ich nun für meine Teledat 150 PCI- IRQ 10-Port oxdf80 u.a. Meldungen. Soweit war ich bisher noch nicht gekommen... Start: Feb 9 22:31:27 gandalf kernel: ISDN subsystem Rev: 1.91/1.79/1.95/1.58/1.17/1.3 loaded Feb 9 22:31:27 gandalf kernel: HiSax: Linux Driver for passive ISDN cards Feb 9 22:31:27 gandalf kernel: HiSax: Version 3.3c (module) Feb 9 22:31:27 gandalf kernel: HiSax: Layer1 Revision 2.36 Feb 9 22:31:27 gandalf kernel: HiSax: Layer2 Revision 2.20 Feb 9 22:31:27 gandalf kernel: HiSax: TeiMgr Revision 2.13 Feb 9 22:31:27 gandalf kernel: HiSax: Layer3 Revision 2.10 Feb 9 22:31:27 gandalf kernel: HiSax: LinkLayer Revision 2.39 Feb 9 22:31:27 gandalf kernel: HiSax: Approval certification valid Feb 9 22:31:27 gandalf kernel: HiSax: Approved with ELSA Quickstep series cards Feb 9 22:31:27 gandalf kernel: HiSax: Approval registration numbers: Feb 9 22:31:27 gandalf kernel: HiSax: German D133361J CETECOM ICT Services GmbH Feb 9 22:31:27 gandalf kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Feb 9 22:31:27 gandalf kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Feb 9 22:31:27 gandalf kernel: HiSax: Total 1 card defined Feb 9 22:31:27 gandalf kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) Feb 9 22:31:27 gandalf kernel: HiSax: AVM driver Rev. 2.11 Feb 9 22:31:27 gandalf kernel: AVM A1: Byte at f780 is ff Feb 9 22:31:27 gandalf kernel: AVM A1: Byte at f783 is ff Feb 9 22:31:27 gandalf kernel: AVM A1: Byte at f782 is ff Feb 9 22:31:27 gandalf kernel: AVM A1: Byte at f780 is ff Feb 9 22:31:27 gandalf kernel: HiSax: AVM A1 config irq:10 cfg:0xF780 Feb 9 22:31:27 gandalf kernel: HiSax: isac:0xF380/0xEF80 Feb 9 22:31:27 gandalf kernel: HiSax: hscx A:0xE380/0xDF80 hscx B:0xEB80/0xE780 Feb 9 22:31:27 gandalf kernel: AVM A1: ISAC version (ff): 2085 V2.3 Feb 9 22:31:27 gandalf kernel: AVM A1: HSCX version A: ??? B: ??? Feb 9 22:31:27 gandalf kernel: AVM A1: wrong HSCX versions check IO address Feb 9 22:31:27 gandalf kernel: HiSax: Card AVM A1 not installed ! Feb 9 22:31:27 gandalf kernel: ISDN-subsystem unloaded [...] und nachdem ich wie in der Liste vorgeschlagen wurde bei PCI-Karten nichts einzustellen folgendes: Feb 9 22:34:43 gandalf kernel: ISDN subsystem Rev: 1.91/1.79/1.95/1.58/1.17/1.3 loaded Feb 9 22:34:44 gandalf kernel: HiSax: Linux Driver for passive ISDN cards Feb 9 22:34:44 gandalf kernel: HiSax: Version 3.3c (module) Feb 9 22:34:44 gandalf kernel: HiSax: Layer1 Revision 2.36 Feb 9 22:34:44 gandalf kernel: HiSax: Layer2 Revision 2.20 Feb 9 22:34:44 gandalf kernel: HiSax: TeiMgr Revision 2.13 Feb 9 22:34:44 gandalf kernel: HiSax: Layer3 Revision 2.10 Feb 9 22:34:44 gandalf kernel: HiSax: LinkLayer Revision 2.39 Feb 9 22:34:44 gandalf kernel: HiSax: Approval certification valid Feb 9 22:34:44 gandalf kernel: HiSax: Approved with ELSA Quickstep series cards Feb 9 22:34:44 gandalf kernel: HiSax: Approval registration numbers: Feb 9 22:34:44 gandalf kernel: HiSax: German D133361J CETECOM ICT Services GmbH Feb 9 22:34:44 gandalf kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Feb 9 22:34:44 gandalf kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Feb 9 22:34:44 gandalf kernel: HiSax: Warning - no protocol specified Feb 9 22:34:44 gandalf kernel: HiSax: Note! module load syntax has changed. Feb 9 22:34:44 gandalf kernel: HiSax: using protocol EURO Feb 9 22:34:44 gandalf kernel: HiSax: Total 0 card defined Feb 9 22:34:44 gandalf kernel: ISDN-subsystem unloaded Feb 9 22:35:05 gandalf su: (to root) root on /dev/pts/1 Feb 9 22:35:31 gandalf kernel: CSLIP: code copyright 1989 Regents of the University of California Feb 9 22:35:31 gandalf kernel: ISDN subsystem Rev: 1.91/1.79/1.95/1.58/1.17/1.3 loaded Feb 9 22:35:31 gandalf kernel: HiSax: Linux Driver for passive ISDN cards Feb 9 22:35:31 gandalf kernel: HiSax: Version 3.3c (module) Feb 9 22:35:31 gandalf kernel: HiSax: Layer1 Revision 2.36 Feb 9 22:35:31 gandalf kernel: HiSax: Layer2 Revision 2.20 Feb 9 22:35:31 gandalf kernel: HiSax: TeiMgr Revision 2.13 Feb 9 22:35:31 gandalf kernel: HiSax: Layer3 Revision 2.10 Feb 9 22:35:31 gandalf kernel: HiSax: LinkLayer Revision 2.39 Feb 9 22:35:31 gandalf kernel: HiSax: Approval certification valid Feb 9 22:35:31 gandalf kernel: HiSax: Approved with ELSA Quickstep series cards Feb 9 22:35:31 gandalf kernel: HiSax: Approval registration numbers: Feb 9 22:35:31 gandalf kernel: HiSax: German D133361J CETECOM ICT Services GmbH Feb 9 22:35:31 gandalf kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Feb 9 22:35:31 gandalf kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Feb 9 22:35:31 gandalf kernel: HiSax: Total 1 card defined Feb 9 22:35:31 gandalf kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) Feb 9 22:35:31 gandalf kernel: HiSax: AVM driver Rev. 2.11 Feb 9 22:35:31 gandalf kernel: HiSax: AVM A1 hscx A fifo port 0 already in use Feb 9 22:35:31 gandalf kernel: HiSax: Card AVM A1 not installed ! Feb 9 22:35:31 gandalf kernel: ISDN-subsystem unloaded --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
On Don, 10 Feb 2000, Korb, Jochen wrote:
Ohne etwas zu tun erhalte ich nun für meine Teledat 150 PCI- IRQ 10-Port
dabei handelt es sich meines wissens um eine normale Fritz!Card ... hast du in der rc.config (oder unter /etc/rc.config.d/) diese karte auch so angegeben - welche Distri (version) hast du, und welchen kernel hast du installiert ? hast du im kernel auch die ISDN-Unterstützung dazu kompiliert ? MfG, Joerg. -- LinuxHaus Stuttgart | Tel.: +49 (7 11) 2 85 19 05 Henner, Reyer & Nickels, Datentechnik GbR | D2: +49 (1 72) 7 35 31 09 | Fax: +49 (7 11) 5 78 06 92 Linux, Netzwerke, Webhosting & Support | http://lihas.de --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
"Korb, Jochen" schrieb:
Hi nochmal,
ich hatte gestern gepostet, daß ich keine Module laden könne, weil das Device (ISDN, SOUND) busy ist.
Ohne etwas zu tun erhalte ich nun für meine Teledat 150 PCI- IRQ 10-Port oxdf80 u.a. Meldungen.
[ Meldungen umweltfreundlich entsorgt ] nur mal ein schuß ins blaue: versuch mal hisax mit type=27 und proto=2 zu starten. Ich gehe doch recht in der Annahme, daß du eine Fritz!Card PCI (AVM A1) hast oder? Daniel "Fengor" Brachmann --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (3)
-
9d@cosmosdirekt.de
-
jhe@lihas.de
-
Jochen.Korb@detecon.com