Hallo Ich habe Probleme mit der Haupauge WinTV-PCI-FM SuSE 7.0 Kernel 2.2.16 X-Free 4.0 Elsa Winner 2000 AVI3D (Virge) Ich kann zwar den Ton empfangen, aber ich sehe unter KWINTV und XAWTV nur ein schwarzes Bild. modules.conf alias char-major-81 bttv pre-install bttv; modprobe -k msp3400; modprobe -k tuner type=5 options bttv card=10 pll=1 radio=1 options tuner type=5 Die Parameter konnte ich aus älteren Postimgs und HOW-TOs entnehmen können. Mit dem "Original" aus modules.conf und den obigen Parametern habe ich es mit den selben Ergebnissen auch schon probiert. in /var/log/messages finde ich dann un 3 13:34:29 gargamel kernel: Linux video capture interface: v1.00 Jun 3 13:34:29 gargamel kernel: i2c-core.o: i2c core module Jun 3 13:34:29 gargamel kernel: i2c-algo-bit.o: i2c bit algorithm module Jun 3 13:34:29 gargamel kernel: bttv: driver version 0.7.35 loaded Jun 3 13:34:29 gargamel kernel: bttv: using 2 buffers with 2080k (4160k total) for capture Jun 3 13:34:29 gargamel kernel: bttv: Bt8xx card found (0). Jun 3 13:34:29 gargamel kernel: bttv0: Brooktree Bt878 (rev 17) bus: 0, devfn: 88, irq: 9, memory: 0xe78Jun 3 13:34:29 gargamel kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for eeprom @ 0xa0... found Jun 3 13:34:29 gargamel kernel: bttv0: card id: Hauppauge WinTV (0x13eb0070) => card=10 Jun 3 13:34:29 gargamel kernel: bttv0: model: BT878(Hauppauge new (bt878)) [insmod option] Jun 3 13:34:29 gargamel kernel: bttv0: Hauppauge eeprom: tuner=Philips FM1216 (5) Jun 3 13:34:29 gargamel kernel: bttv0: Hauppauge msp34xx: reset line init Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found Jun 3 13:34:29 gargamel kernel: i2c-core.o: adapter unregistered: bt848 #0 Jun 3 13:34:29 gargamel kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found Jun 3 13:34:29 gargamel kernel: i2c-core.o: driver i2c msp3400 driver registered. Jun 3 13:34:29 gargamel kernel: msp3400: init: chip=MSP3415D-B3, has NICAM support Jun 3 13:34:29 gargamel kernel: msp3410: daemon started Jun 3 13:34:29 gargamel kernel: bttv0: i2c attach [MSP3415D-B3] Jun 3 13:34:29 gargamel kernel: i2c-core.o: client [MSP3415D-B3] registered to adapter [bt848 #0](pos. 0Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for TDA8425 @ 0x82... not found Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for TDA985x @ 0xb6... not found Jun 3 13:34:29 gargamel kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jun 3 13:34:29 gargamel kernel: i2c-core.o: driver i2c TV tuner driver registered. Jun 3 13:34:29 gargamel kernel: tuner: chip found @ 0x61 Jun 3 13:34:29 gargamel kernel: bttv0: i2c attach [Philips PAL] Jun 3 13:34:29 gargamel kernel: i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 1Jun 3 13:34:29 gargamel kernel: bttv0: PLL: 28636363 => 35468950 ... ok Doch wenn ich den Sender Wechseln will erscheint dort Jun 3 13:37:43 gargamel kernel: bttv0: irq: SCERR risc_count=08ea0020 Jun 3 13:37:43 gargamel kernel: bttv0: aiee: error loops Jun 3 13:37:51 gargamel kernel: bttv0: resetting chip Jun 3 13:37:51 gargamel kernel: bttv0: PLL: 28636363 => 35468950 ... ok Ich hoffe, dass ich das Problem genau genug beschrieben habe. TIA Robert