Hotplug, Automatismus, SuSE 9.2
Hallo beisammen. Da ich absolut gegen automatisches Mounten via subfs etc. bin, habe ich bei einer SuSE 9.2 diesen Automatismus z.B. in /etc/sysconfig/hotplug abgestellt. Wenn ich nun meinen USB-Stick einstecke, wird lediglich ein Eintrag fuer /etc/fstab generiert sowie ein entsprechendes Verzeichnis unter /media und ein Device-Knoten... (By the way: welcher tiefere Sinn steckt denn dahinter, ein Device-Knoten wie /dev/sda1 per udev generieren zu lassen und dann wieder zu entfernen? Das tut sich mir ehrlich gesagt gerade nicht auf. Naja.) Soweit so gut, ich kann also den Stick als User genau dann mounten und umounten, wenn ich es moechte. Leider war das aber noch nicht alles: denn nach jedem Einstecken des Sticks oeffnet sich ein Fenster, das mir den Inhalt von /media/<name> zeigen moechte, wobei <name> der automatisch generierte Name (siehe oben) ist. Das Fenster ist nun zwangsweise immer leer (weil ich ja von Hand mounte und zu dem Zeitpunkt, wo das Fenster aufgeht, noch gar nichts unter /media/<name> gemountet wurde *tusch*). Dieser Automatismus (by the way: warum gibt es keinen Crosslink, sodass erkannt wird, dass das automatische Mounten in /etc/sysconfig/hotplug abgestellt wurde? Bug oder Feature?) macht also noch weniger Sinn als die anderen davor (die konnte ich bisher aber wenigstens abstellen)... Wer oder was ist nun fuer dieses Fenster zustaendig und wie kann das abgestellt werden? Waere nett, wenn mich jemand in die richtige Richtung stossen koennte. Vielen Dank. Gruesse aus London, Th. PS: Bei alten SuSE Versionen brauchte man immer ein bissl Zeit, nach einer Installation alle Features zu aktivieren. Heute braucht man noch mehr Zeit, alle unnoetigen Features nach einer Installation wieder zu deaktivieren :-) PPS: Ja, wahrscheinlich bin ich ein Dinosaurier...
Thomas Hertweck schrieb:
Waere nett, wenn mich jemand in die richtige Richtung stossen koennte. Vielen Dank.
Nicht getestet, glaube aber: Suseplugger im KDE in der Iconleiste, einrichten, 5. Textfeld von oben. Das mal deaktivieren.
Gruesse aus London, Th.
Gruss zurück. :-)
PS: Bei alten SuSE Versionen brauchte man immer ein bissl Zeit, nach einer Installation alle Features zu aktivieren. Heute braucht man noch mehr Zeit, alle unnoetigen Features nach einer Installation wieder zu deaktivieren :-)
Hmmm, ja, schon, aber ich versuche mich daran zu gewöhnen... ;-)
PPS: Ja, wahrscheinlich bin ich ein Dinosaurier...
Willkommen im Club! :-) -- Bye, Tobias
Hallo! Am Mittwoch, 16. März 2005 00:21 schrieb Thomas Hertweck:
Da ich absolut gegen automatisches Mounten via subfs etc. bin, habe ich bei einer SuSE 9.2 diesen Automatismus z.B. in /etc/sysconfig/hotplug abgestellt. Wenn ich nun meinen USB-Stick einstecke, wird lediglich ein Eintrag fuer /etc/fstab generiert sowie ein entsprechendes Verzeichnis unter /media und ein Device-Knoten... (By the way: welcher tiefere Sinn steckt denn dahinter, ein Device-Knoten wie /dev/sda1 per udev generieren zu lassen und dann wieder zu entfernen? Das tut sich mir ehrlich gesagt gerade nicht auf.
Das hat mich auch gewundert...
Naja.) Soweit so gut, ich kann also den Stick als User genau dann mounten und umounten, wenn ich es moechte. Leider war das aber noch nicht alles: denn nach jedem Einstecken des Sticks oeffnet sich ein Fenster, das mir den Inhalt von /media/<name> zeigen moechte, wobei <name> der automatisch generierte Name (siehe oben) ist. Das Fenster ist nun zwangsweise immer leer (weil ich ja von Hand mounte und zu dem Zeitpunkt, wo das Fenster aufgeht, noch gar nichts unter /media/<name> gemountet wurde *tusch*). Dieser Automatismus (by the way: warum gibt es keinen Crosslink, sodass erkannt wird, dass das automatische Mounten in /etc/sysconfig/hotplug abgestellt wurde? Bug oder Feature?) macht also noch weniger Sinn als die anderen davor (die konnte ich bisher aber wenigstens abstellen)... Wer oder was ist nun fuer dieses Fenster zustaendig und wie kann das abgestellt werden? Waere nett, wenn mich jemand in die richtige Richtung stossen koennte. Vielen Dank.
Das macht der Suse-Plugger. Wenn Du den killst ist es vorbei mit den blöden Fenstern.... Mit kde3.4 findet sich auf dem Desktop eine "Einrichtungsdatei" "Arbeitsplatz". (Je erinnert mich an was...) Damit lassen sich dann (oder im Konqueror über devices:/) diese Dinger mounten, also per klick, na ja...
Gruesse aus London, Th.
PS: Bei alten SuSE Versionen brauchte man immer ein bissl Zeit, nach einer Installation alle Features zu aktivieren. Heute braucht man noch mehr Zeit, alle unnoetigen Features nach einer Installation wieder zu deaktivieren :-) PPS: Ja, wahrscheinlich bin ich ein Dinosaurier...
Das ist wohl unser aller Schicksal... Gruß Harald
Harald Huthmann wrote:
[...] Das macht der Suse-Plugger. Wenn Du den killst ist es vorbei mit den blöden Fenstern....
Ah, habs gefunden. Unter "configure" koennte man sogar - wie Tobias schrieb, vielen Dank - einzelne Events abschalten. Verhindere nun einfach das automatische Laden von suseplugger beim Start, dann hat sich das erledigt.
Mit kde3.4 findet sich auf dem Desktop eine "Einrichtungsdatei" "Arbeitsplatz". (Je erinnert mich an was...)
Da gibt's tatsaechlich ein "Arbeitsplatz" Icon? Ich verstehe es langsam nicht mehr. Linux (SuSE, Desktop, wie auch immer man das nennen will) und KDE werden echt immer Windows-aehnlicher und verlieren ihr Profil. Automatische passwortlose User-Logins per default, automatisches subfs-Mounten, usw. usw. Jetzt werden schon die Namen geklont. Mir gefaellt's ehrlich gesagt nicht, aber der Markt verlangt so etwas wohl, und wie immer gibt das Geld den Ausschlag...
Damit lassen sich dann (oder im Konqueror über devices:/) diese Dinger mounten, also per klick, na ja...
Konqueror habe ich hier noch nie wirklich absichtlich zum Arbeiten gestartet. Ich mounte und arbeite (kopiere) hpts. in einem ganz normalen xterm. Danke fuer die Hilfe. Th.
participants (3)
-
Harald Huthmann
-
Thomas Hertweck
-
Tobias Abt