dauermount Suse 9.2 MO Laufwerk SCSI Sound Hotplug

23 Jun 2005

      Ich hatte das Problem schon einmal gepostet, es kam aber kein Vorschlag

Eigentlich ist das Problem das sporadische Nichtmounten 
meines SCSI-MO-Laufwerks und ich vermute, es gibt 
ein Zusammenhang zwischen Hotplug, SCSI und Sound

Symptome: 

Das SCSI MO-Laufwerk "mounted nur mit Schluckauf" 
unter Suse 9.2 -kernel 2.6,

d.h. ich binde über mount ein, und das 
Laufwerk läuft und läuft und läuft
bis zum Herunterfahren des Rechners.
Selbst "kill 9 Prozess hilft nicht.

Booten unter Suse 9.0, Kernel 2.4 klappt, Sound nie getestet.
Treiber tmscsim
SCSI Scanner, DVD und das CD-ROM funktionieren
!!! Hotplug ist ausgeschaltet, da mit Hotplug das MO-Laufwerk anlief und
überhaupt nicht zu stoppen war.

Hardware AMD64 unter 32bit, KDE Oberfläche
ATA hda ist für Redmond
SATA für Linux
CD-Recorder bzw als CD-ROM an /dev/hdc.
der Rest ist an SCSI, Adapter Tekram DC390.

Ach Audio-Sound geht nur bei /dev/hdc und ich vermute, 
da gibt es einen Zusammenhang.

Redmont zickt nicht bei Audio über SCSI,  
weiß aber auch nichts von SATA.

Gruß
Peter

es folgt fstab und der interessante Teil von /var/log/messages bis zum 
Reboot

=======================

Suse 9.0  - AMD64 32bit alle Patches über Yast

/dev/sdb8	/	 ext3		defaults			1 1

devpts	/dev/pts	devpts     mode=0620,gid=5		0 0
proc		/proc		proc       defaults			0 0
usbdevfs	/proc/bus/usb	usbdevfs	noauto			0 0

/dev/cdrecorder	/media/cdrecorder	auto	ro,noauto,user,exec	0 0
/dev/cdrom	/media/cdrom	auto	ro,noauto,user,exec	0 0
/dev/dvd	/media/dvd		auto	ro,noauto,user,exec	0 0
/dev/dvd11	/media/cd_scsi	auto	ro,noauto,user,exec	0 0

/dev/sda1	/media/mo_lin	ext2	noauto,user,noexec,sync		0 0
/dev/hda5	/media/win_d	vfat	noauto,user,noexec,sync		0 0

------------------------------------

Suse 9.2 AMD64 32bit alle Patches über Yast

/dev/sdb6	/	reiserfs	acl,user_xattr		1 1

devpts	/dev/pts	devpts	mode=0620,gid=5	0 0
proc		/proc		proc		defaults			0 0
usbfs		/proc/bus/usb	usbfs	noauto			0 0
sysfs		/sys		sysfs		noauto			0 0

/dev/cdrecorder	/media/cdrecorder	auto	ro,noauto,user,exec	0 0
/dev/cdrom	/media/cdrom		auto	ro,noauto,user,exec	0 0
/dev/dvd	/media/dvd			auto	ro,noauto,user,exec	0 0
/dev/dvd11	/media/cd_scsi		auto	ro,noauto,user,exec	0 0

/dev/sda1	/media/mo_lin	ext2	noauto,user,noexec,sync		0 0

====================================

Jun 20 08:05:50 lux su: (to root) peter on /dev/pts/4
Jun 20 08:05:50 lux su: pam_unix2: session started for user root, 
service su 
Jun 20 08:06:30 lux kernel: SCSI device sda: 310352 2048-byte hdwr 
sectors (636 MB)
Jun 20 08:06:30 lux kernel: sda: Write Protect is off
Jun 20 08:06:30 lux kernel: sda: Mode Sense: 7f 03 10 08
Jun 20 08:06:30 lux kernel: SCSI device sda: drive cache: write back
Jun 20 08:06:30 lux kernel: SCSI device sda: 310352 2048-byte hdwr 
sectors (636 MB)
Jun 20 08:06:30 lux kernel: sda: Write Protect is off
Jun 20 08:06:30 lux kernel: sda: Mode Sense: 7f 03 10 08
Jun 20 08:06:30 lux kernel: SCSI device sda: drive cache: write back
Jun 20 08:06:30 lux kernel:  sda:<3>DC390: pSRB == pTmpSRB! (TagQ 
Error?) (02-0)
Jun 20 08:07:01 lux kernel: DC390: Abort command (pid 30011, Device 
02-00)
Jun 20 08:07:01 lux kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Jun 20 08:07:01 lux kernel: DC390: AdpaterStatus: 00, SRB Status 00
Jun 20 08:07:01 lux kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
0891c410
Jun 20 08:07:01 lux kernel: DC390: Register dump: SCSI block:
Jun 20 08:07:01 lux kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Jun 20 08:07:01 lux kernel: DC390:  000000   1a   11   c4   00   8a   17   
48   08   84
Jun 20 08:07:01 lux kernel: DC390: FIFO: 00 00 00 00 00 00 00 00 00 00
Jun 20 08:07:01 lux kernel: DC390: Register dump: DMA engine:
Jun 20 08:07:01 lux kernel: DC390: Cmd   STrCnt    SBusA    WrkBC    
WrkAC Stat SBusCtrl
Jun 20 08:07:01 lux kernel: DC390:  80 00000020 00463e00 00000000 
00463e20   00 03185300
Jun 20 08:07:01 lux kernel: DC390: Register dump: PCI Status: 0200
Jun 20 08:07:01 lux kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Jun 20 08:07:01 lux kernel: DC390: Aborted pid 30011
Jun 20 08:07:01 lux kernel: DC390: Abort command (pid 30030, Device 
00-00)
Jun 20 08:07:31 lux kernel: DC390: Abort command (pid 30030, Device 
00-00)
Jun 20 08:07:41 lux kernel: DC390: Target 2: Sync transfer 5.0 MHz, 
Offset 10
Jun 20 08:07:41 lux kernel: DC390: Target 0: Sync transfer 10.0 MHz, 
Offset 8
Jun 20 08:07:41 lux kernel: DC390: pSRB == pTmpSRB! (TagQ Error?) (02-0)
Jun 20 08:08:13 lux kernel: DC390: Abort command (pid 30124, Device 
02-00)
Jun 20 08:08:13 lux kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Jun 20 08:08:13 lux kernel: DC390: AdpaterStatus: 00, SRB Status 00
Jun 20 08:08:13 lux kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
2081c410
Jun 20 08:08:13 lux kernel: DC390: Register dump: SCSI block:
Jun 20 08:08:13 lux kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Jun 20 08:08:13 lux kernel: DC390:  00004e   1a   01   c4   00   8a   17   
48   08   84
Jun 20 08:08:13 lux kernel: DC390: FIFO: 00 00 00 00 00 00 00 00 00 00
Jun 20 08:08:13 lux kernel: DC390: Register dump: DMA engine:
Jun 20 08:08:13 lux kernel: DC390: Cmd   STrCnt    SBusA    WrkBC    
WrkAC Stat SBusCtrl
Jun 20 08:08:13 lux kernel: DC390:  80 00000060 1fe533fc 0000004c 
1fe53410   00 03185300
Jun 20 08:08:13 lux kernel: DC390: Register dump: PCI Status: 0200
Jun 20 08:08:13 lux kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Jun 20 08:08:13 lux kernel: DC390: Aborted pid 30124
Jun 20 08:08:13 lux kernel: DC390: Abort command (pid 30134, Device 
00-00)
Jun 20 08:08:43 lux kernel: DC390: Abort command (pid 30134, Device 
00-00)
Jun 20 08:08:53 lux kernel: DC390: Target 2: Sync transfer 5.0 MHz, 
Offset 10
Jun 20 08:08:53 lux kernel: DC390: Target 0: Sync transfer 10.0 MHz, 
Offset 8
Jun 20 08:08:53 lux kernel: DC390: pSRB == pTmpSRB! (TagQ Error?) (02-0)
Jun 20 08:09:25 lux kernel: DC390: Abort command (pid 30226, Device 
02-00)
Jun 20 08:09:25 lux kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Jun 20 08:09:25 lux kernel: DC390: AdpaterStatus: 00, SRB Status 00
Jun 20 08:09:25 lux kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
2081c410
Jun 20 08:09:25 lux kernel: DC390: Register dump: SCSI block:
Jun 20 08:09:25 lux kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Jun 20 08:09:25 lux kernel: DC390:  00004e   1a   01   c4   00   8a   17   
48   08   84
Jun 20 08:09:25 lux kernel: DC390: FIFO: 00 00 00 00 00 00 00 00 00 00
Jun 20 08:09:25 lux kernel: DC390: Register dump: DMA engine:
Jun 20 08:09:25 lux kernel: DC390: Cmd   STrCnt    SBusA    WrkBC    
WrkAC Stat SBusCtrl
Jun 20 08:09:25 lux kernel: DC390:  80 00000060 1fe533fc 0000004c 
1fe53410   00 03185300
Jun 20 08:09:25 lux kernel: DC390: Register dump: PCI Status: 0200
Jun 20 08:09:25 lux kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Jun 20 08:09:25 lux kernel: DC390: Aborted pid 30226
Jun 20 08:09:25 lux kernel: DC390: Abort command (pid 30236, Device 
00-00)
Jun 20 08:09:55 lux kernel: DC390: Abort command (pid 30236, Device 
00-00)
Jun 20 08:10:05 lux kernel: DC390: Target 2: Sync transfer 5.0 MHz, 
Offset 10
Jun 20 08:10:05 lux kernel: DC390: Target 0: Sync transfer 10.0 MHz, 
Offset 8
Jun 20 08:10:05 lux kernel: DC390: pSRB == pTmpSRB! (TagQ Error?) (02-0)
Jun 20 08:10:31 lux init: Switching to runlevel: 2
Jun 20 08:10:31 lux xinetd[7193]: Exiting...
Jun 20 08:10:32 lux su: pam_unix2: session finished for user root, 
service su 
Jun 20 08:10:32 lux gconfd (peter-7745): Signal 1 erhalten, 
ordungsgemä�237es Herunterfahren
Jun 20 08:10:32 lux gconfd (peter-7745): Signal 15 erhalten, 
ordungsgemä�237es Herunterfahren
Jun 20 08:10:32 lux gconfd (peter-7745): Beenden
Jun 20 08:10:32 lux kdm: :0[7212]: pam_unix2: session finished for user 
peter, service xdm 
Jun 20 08:10:32 lux sshd[7021]: Received signal 15; terminating.
Jun 20 08:10:32 lux SuSEfirewall2: Firewall rules unloaded.
Jun 20 08:10:33 lux su: pam_unix2: session finished for user root, 
service su 
Jun 20 08:10:37 lux kernel: DC390: Abort command (pid 30353, Device 
02-00)
Jun 20 08:10:37 lux kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Jun 20 08:10:37 lux kernel: DC390: AdpaterStatus: 00, SRB Status 00
Jun 20 08:10:37 lux kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
2081c410
Jun 20 08:10:37 lux kernel: DC390: Register dump: SCSI block:
Jun 20 08:10:37 lux kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Jun 20 08:10:37 lux kernel: DC390:  00004e   1a   01   c4   00   8a   17   
48   08   84
Jun 20 08:10:37 lux kernel: DC390: FIFO: 00 00 00 00 00 00 00 00 00 00
Jun 20 08:10:37 lux kernel: DC390: Register dump: DMA engine:
Jun 20 08:10:37 lux kernel: DC390: Cmd   STrCnt    SBusA    WrkBC    
WrkAC Stat SBusCtrl
Jun 20 08:10:37 lux kernel: DC390:  80 00000060 1fe533fc 0000004c 
1fe53410   00 03185300
Jun 20 08:10:37 lux kernel: DC390: Register dump: PCI Status: 0200
Jun 20 08:10:37 lux kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Jun 20 08:10:37 lux kernel: DC390: Aborted pid 30353
Jun 20 08:10:37 lux kernel: DC390: Abort command (pid 30370, Device 
00-00)
Jun 20 08:11:07 lux kernel: DC390: Abort command (pid 30370, Device 
00-00)
Jun 20 08:11:17 lux kernel: DC390: Target 2: Sync transfer 5.0 MHz, 
Offset 10
Jun 20 08:11:17 lux kernel: DC390: Target 0: Sync transfer 10.0 MHz, 
Offset 8
Jun 20 08:11:17 lux kernel: DC390: pSRB == pTmpSRB! (TagQ Error?) (02-0)
Jun 20 08:11:47 lux init: Switching to runlevel: 1
Jun 20 08:11:47 lux kernel: DC390: Abort command (pid 30724, Device 
02-00)
Jun 20 08:11:47 lux kernel: DC390: SRB: Xferred 00000000, Remain 
00000000, State 00000000, Phase 01
Jun 20 08:11:47 lux kernel: DC390: AdpaterStatus: 00, SRB Status 00
Jun 20 08:11:47 lux kernel: DC390: Status of last IRQ (DMA/SC/Int/IRQ): 
2081c410
Jun 20 08:11:47 lux kernel: DC390: Register dump: SCSI block:
Jun 20 08:11:47 lux kernel: DC390: XferCnt  Cmd Stat IntS IRQS FFIS Ctl1 
Ctl2 Ctl3 Ctl4
Jun 20 08:11:47 lux kernel: DC390:  00004e   1a   01   c4   00   8a   17   
48   08   84
Jun 20 08:11:47 lux kernel: DC390: FIFO: 00 00 00 00 00 00 00 00 00 00
Jun 20 08:11:47 lux kernel: DC390: Register dump: DMA engine:
Jun 20 08:11:47 lux kernel: DC390: Cmd   STrCnt    SBusA    WrkBC    
WrkAC Stat SBusCtrl
Jun 20 08:11:47 lux kernel: DC390:  80 00000060 1fe530fc 0000004c 
1fe53110   00 03185300
Jun 20 08:11:47 lux kernel: DC390: Register dump: PCI Status: 0200
Jun 20 08:11:47 lux kernel: DC390: In case of driver trouble read 
Documentation/scsi/tmscsim.txt
Jun 20 08:11:47 lux kernel: DC390: Aborted pid 30724
Jun 20 08:11:53 lux smpppd[5117]: terminating on signal 15
Jun 20 08:11:54 lux kernel: ALSA sound/core/memory.c:71: Not freed 
snd_alloc_kmalloc = 4100
Jun 20 08:11:54 lux kernel: ALSA sound/core/memory.c:80: kmalloc(820) 
from e1a023de not freed
Jun 20 08:11:54 lux last message repeated 4 times
Jun 20 08:11:54 lux kernel: Kernel logging (proc) stopped.
Jun 20 08:11:54 lux kernel: Kernel log daemon terminating.
Jun 20 08:11:55 lux exiting on signal 15

Peter Mc Donough

tags

participants (1)