Hallo, habe sane-1.0.1 kompiliert. Es wird bei mir aber kein xscanimage erzeugt - und bei make install wird auch nicht versucht das zu installieren. Es liegt ein xscanimage.c im source code vor. Ich habe das ganze Installationsverzeichnis rekursiv nach xscanimage durchsucht. scanimage dagegen wird erzeugt. BTW: in ./configure gibts den Hinweis: *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. gtk-config gibts wirklich nicht!! Aber dafür ..../man/gtk-config.1.gz - es scheint da also irgendwo was schiefgelaufen zu sein!?!? $ locate gtk-config /usr/man/allman/man1/gtk-config.1.gz Alle Pakete mit gkt: rpm -qa | grep gtk -i gtkn-1.2.1-4 perl_gtk-0.5120-0 gtk-1.0.6-36 aber keines will mit .../man/gtk-config.1.gz etwas zu tun haben: gerlach@rex:~ > rpm -q --whatprovides gkt-config.1.gz no package provides gkt-config.1.gz Auch einzeln mit rpm -ql die obigen pakete durchsucht brachte kein gtk-config* zutage. man gtk-config erzählt etwas von gtk+ - das gibts aber nirgends ! Was für ein gtk brauche ich da ????? In yast find ich kein gtk-Paket, das sinnvoll aussieht. make ==== make läuft problemlos durch und ausser einer kurzen Beschäftigung mit gtk-config.1.gz ist von gtk nicht die Rede ?!?! Kein Fehler sonst - aber auch kein xscanimage im gesamten Kompilierungsverzeichnis. Auch make install installiert kein xscanimage - und meldet auch keinen Fehler. nach erfolgreichem make: gerlach@rex:~/install/sane-1.0.1 > find -iname "*scanim*" -exec ls -l {} \; -rw-r--r-- 1 199 501 34141 Mar 5 1999 ./frontend/scanimage.c -rw-r--r-- 1 199 501 43551 Apr 3 1999 ./frontend/xscanimage.c -rw-r--r-- 1 root root 48436 Feb 2 11:13 ./frontend/scanimage.o -rwxr-xr-x 1 root root 47753 Feb 2 11:13 ./frontend/.libs/scanimage -rwxr-xr-x 1 root root 3032 Feb 2 11:13 ./frontend/scanimage -rw-r--r-- 1 199 501 7087 Mar 5 1999 ./doc/scanimage.man -rw-r--r-- 1 199 501 4822 May 14 1998 ./doc/xscanimage.man -rw-r--r-- 1 root root 7107 Feb 2 11:14 ./doc/scanimage.1 -rw-r--r-- 1 root root 4841 Feb 2 11:14 ./doc/xscanimage.1 -rw-r--r-- 1 199 501 30274 Dec 18 1997 ./japi/Jscanimage.java Jemand eine Idee wie ich xscanimage erhalte ? thx Ekkard, Suse 6.1 Hintergrund: habe vor ein paar Wochen das paket sane-1.0.1.tar.gz gesaugt und einfach über das Suse-rpm-Paket sane-1.0.0-27 drüberinstalliert - und zwar auf /usr (nicht /usr/local, wusste damals noch nicht dass die unterschiedlichen Verzeichnisse Absicht sind.) Mein Scanner lief, aber er lief schlecht, den gescannte Farbbilder haben horizontale bunte feine Farbstreifen. Jetzt habe ich gemerkt, dass ich mit 2 evtl interferierenden Paketen arbeite und das der Grund sein könnte für die schlechten scans. Habe also das rpm-Paket deinstalliert und das gesaugte Paket sane-1.0.1.tar.gz neu konfiguriert (diesmal alles gelassen, also auf /usr/local) , kompiliert mit make und installiert mit make install. Jedoch fehlt jetzt xscanimage, s.o. !! KEIN Fehler bei der Kompilierung, kein Fehler beim installieren!! Wo ist xscanimage ??? --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
On 02-Feb-2000 Ekkard Gerlach wrote:
man gtk-config erzählt etwas von gtk+ - das gibts aber nirgends ! Was für ein gtk brauche ich da ????? In yast find ich kein gtk-Paket, das sinnvoll aussieht.
Gibt es nicht auf der Suse ein gtkdevel-Paket? Kann leider berade nicht nachschauen, aber irgendwie habe ich da so etwas in Erinnerung. Gruss, Heinz. -- E-Mail: Heinz W. Pahlke <h.pahlke@berlin.de> Date: 02-Feb-2000 Time: 13:15:36 This message was sent by XFMail via S.u.S.E. Linux 6.2 --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Am Mit, 02 Feb 2000 schrieb Ekkard Gerlach:
man gtk-config erzählt etwas von gtk+ - das gibts aber nirgends ! Was für ein gtk brauche ich da ?????
ftp://ftp.gtk.org/pub/gtk/v1.2/ Ciao, Bjørn -- o_) Bjoern Buerger http://bbuerger.home.pages.de .-. _/\ .--------------------------------------------------- --/---\-/(/-' Linux User Group Braunschweig (LUG - BS) `-' http://www.tu-bs.de/initiativen/LUG/ --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo, den gtk-Fehler bekomme ich nicht ohne großen Aufwand weg. Es wird xscanimage einfach nicht erzeugt wegen alter libs etc. *********************************************************** Hat wer sane-1.0.1 am laufen oder einfach nur installiert über ein rpm -Paket ? Dann tu mir doch den Gefallen und maile mir (komprimiert mit bzip2) das /usr/X11R6/bin/xscanimage !!! Es sind das nur noch 130K. Vielleicht kann ich dann mit dieser Krux farbig scannen. Wäre nett ! (Bitte nur nach Vorankündigung mailen , ich brauche es nur einmal ..) ************************************************************ tia Ekkard --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Ekkard Gerlach wrote:
habe sane-1.0.1 kompiliert. Es wird bei mir aber kein xscanimage erzeugt
[..]
BTW: in ./configure gibts den Hinweis: *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. gtk-config gibts wirklich nicht!! Aber dafür ..../man/gtk-config.1.gz - es scheint da also irgendwo was schiefgelaufen zu sein!?!?
Du brauchst nicht nur die Libs sondern auch die Header etc!
Alle Pakete mit gkt: rpm -qa | grep gtk -i gtkn-1.2.1-4 perl_gtk-0.5120-0 gtk-1.0.6-36
Du brauchst neben dem gtkn noch das Dev Packet, bei mir sieht das so aus: gtk-1.2.6-1 gtkdev-1.2.6-1 Im gtkdev steht das gtk-config Script. Wenn Du glib und gtk selber kompilieren willst oder musst: ist eigentlich vollkommen problemlos!
man gtk-config erzählt etwas von gtk+ - das gibts aber
gtk+ - so nennt sich das Gtk.
nirgends ! Was für ein gtk brauche ich da ????? In yast find ich kein gtk-Paket, das sinnvoll aussieht.
Welche SuSE setzt Du ein?
make ==== make läuft problemlos durch und ausser einer kurzen Beschäftigung mit gtk-config.1.gz ist von gtk nicht die Rede ?!?! Kein Fehler sonst - aber auch kein xscanimage im gesamten Kompilierungsverzeichnis. Auch make install installiert kein xscanimage - und meldet auch keinen Fehler.
Das reicht auch :-) xscanimage (xsane ist uebrigends um ein vielfaches besser, siehe Link auf der sane Homepage) braucht das gtk. Wenn das nicht gefunden wird, wird xscanimage nicht kompiliert. -- mfg Thomas Mueller - http://tmueller.home.pages.de --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (4)
-
b.buerger@tu-bs.de
-
h.pahlke@berlin.de
-
SPS_Gerlach@online.de
-
tmm@bigfoot.de