opensuse 12.1 (64-bit): Problem mit ati (Fglrx) Grafik-Treiber
Hallo Liste Habe folgende Hardware: HP Notebook dv7-b50ez: -Intel® Core™ i7-2670QM Prozessor -AMD Radeon HD 6770M (2048 MB) -> verwendeter Treiber: Fglrx (Catalyst 11.2) Bin bei der Installation des Treibers gem. http://en.opensuse.org/SDB:ATI_drivers vorgegangen. Folgende Fehlermeldung erscheint bei # startx WW fglrx: no matching device section for instance (BusID PCI:0@1:0:0) found EE No device detected Hat jemand evtl. eine funktionierende /etc/X11/xorg.conf (mit fglrx und mit Screen-Section)? Vielen Dank und freundlicher Gruss Jörg -- NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie! Jetzt informieren: http://www.gmx.net/de/go/freephone -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hallo Jörg, On Wednesday, 11.January.2012 08:17:49 Jörg Kühne wrote:
Bin bei der Installation des Treibers gem. http://en.opensuse.org/SDB:ATI_drivers vorgegangen.
Also quasi nach der Installation aticonfig --initial aufgerufen? Roman -- Roman Fietze Telemotive AG Buero Muehlhausen Breitwiesen 73347 Muehlhausen Tel.: +49(0)7335/18493-45 http://www.telemotive.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hallo Roman Genau so. Gruss Jörg -------- Original-Nachricht --------
Datum: Wed, 11 Jan 2012 09:40:16 +0100 Von: Roman Fietze
An: opensuse-de@opensuse.org Betreff: Re: opensuse 12.1 (64-bit): Problem mit ati (Fglrx) Grafik-Treiber
Hallo Jörg,
On Wednesday, 11.January.2012 08:17:49 Jörg Kühne wrote:
Bin bei der Installation des Treibers gem. http://en.opensuse.org/SDB:ATI_drivers vorgegangen.
Also quasi nach der Installation
aticonfig --initial
aufgerufen?
Roman
-- Roman Fietze Telemotive AG Buero Muehlhausen Breitwiesen 73347 Muehlhausen Tel.: +49(0)7335/18493-45 http://www.telemotive.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
-- NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie! Jetzt informieren: http://www.gmx.net/de/go/freephone -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am Mittwoch, den 11.01.2012, 11:14 +0100 schrieb "Jörg Kühne":
Hallo Roman
Genau so.
Gruss Jörg
Ich schicke hier mal meine xorg.conf. Ist aber nur die, welche auch vom AMD Treiber angelegt wird. xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Optimus o.ä. hat das Notebook nicht zufällig - oder ? -- MfG Richi PS: Auf PMs wird von mir nicht reagiert. -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hallo Richi Vielen Dank für den das xorg.conf. Seit Neuestem habe ich ein Segmentation fault,vgl. xorg.0.log Switch to AMD [ 184.100] drmOpenDevice: node name is /dev/dri/card0 [ 184.100] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.101] drmOpenDevice: node name is /dev/dri/card0 [ 184.101] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: drmOpenMinor returns 10 [ 184.101] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.101] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 184.101] (==) fglrx(0): RGB weight 888 [ 184.101] (==) fglrx(0): Default visual is TrueColor [ 184.101] (**) fglrx(0): Option "Tiling" "off" [ 184.101] (**) fglrx(0): Option "LinearFramebuffer" "on" [ 184.101] (**) fglrx(0): Option "Shadow" "off" [ 184.101] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) [ 184.101] (**) fglrx(0): ChipID override: 0x0116 [ 184.101] (**) fglrx(0): ChipRev override: 9 [ 184.101] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2)" [ 184.101] Backtrace: [ 184.101] 0: X (xorg_backtrace+0x26) [0x462396] [ 184.102] 1: X (0x400000+0x66919) [0x466919] [ 184.102] 2: /lib64/libpthread.so.0 (0x7fab450d1000+0xfd00) [0x7fab450e0d00] [ 184.102] 3: /usr/lib64/xorg/modules/drivers/intel_drv.so (0x7fab4153b000+0x10112) [0x7fab4154b112] [ 184.102] 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPxPreInit+0x119) [0x7fab41d4e399] [ 184.102] 5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPreInit+0x2079) [0x7fab41d23829] [ 184.103] 6: X (InitOutput+0x834) [0x475f54] [ 184.103] 7: X (0x400000+0x27113) [0x427113] [ 184.103] 8: /lib64/libc.so.6 (__libc_start_main+0xed) [0x7fab4404823d] [ 184.103] 9: X (0x400000+0x275bd) [0x4275bd] [ 184.103] Segmentation fault at address (nil) [ 184.103] Vielen Dank für die Hilfe Gruss Jörg -------- Original-Nachricht --------
Datum: Wed, 11 Jan 2012 19:03:53 +0100 Von: Richard Kraut
An: opensuse-de@opensuse.org Betreff: Re: opensuse 12.1 (64-bit): Problem mit ati (Fglrx) Grafik-Treiber
Am Mittwoch, den 11.01.2012, 11:14 +0100 schrieb "Jörg Kühne":
Hallo Roman
Genau so.
Gruss Jörg
Ich schicke hier mal meine xorg.conf. Ist aber nur die, welche auch vom AMD Treiber angelegt wird.
xorg.conf:
Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection
Section "Module" EndSection
Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection
Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection
Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Optimus o.ä. hat das Notebook nicht zufällig - oder ?
--
MfG Richi
PS: Auf PMs wird von mir nicht reagiert.
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
-- NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie! Jetzt informieren: http://www.gmx.net/de/go/freephone -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am Mittwoch, den 11.01.2012, 19:24 +0100 schrieb "Jörg Kühne":
Vielen Dank für den das xorg.conf. Seit Neuestem habe ich ein Segmentation fault,vgl. xorg.0.log
Switch to AMD
???
[ 184.100] drmOpenDevice: node name is /dev/dri/card0 [ 184.100] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.101] drmOpenDevice: node name is /dev/dri/card0 [ 184.101] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: drmOpenMinor returns 10 [ 184.101] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.101] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 184.101] (==) fglrx(0): RGB weight 888 [ 184.101] (==) fglrx(0): Default visual is TrueColor [ 184.101] (**) fglrx(0): Option "Tiling" "off" [ 184.101] (**) fglrx(0): Option "LinearFramebuffer" "on" [ 184.101] (**) fglrx(0): Option "Shadow" "off" [ 184.101] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[ 184.101] (**) fglrx(0): ChipID override: 0x0116 [ 184.101] (**) fglrx(0): ChipRev override: 9 [ 184.101] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2)" ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Hier sollte eigentlich der AMD Grafikchip angesprochen werden. Der ATI-Treiber funktioniert nicht mit Intel-Grafikchips.
[ 184.101] Backtrace: [ 184.101] 0: X (xorg_backtrace+0x26) [0x462396] [ 184.102] 1: X (0x400000+0x66919) [0x466919] [ 184.102] 2: /lib64/libpthread.so.0 (0x7fab450d1000+0xfd00) [0x7fab450e0d00] [ 184.102] 3: /usr/lib64/xorg/modules/drivers/intel_drv.so (0x7fab4153b000+0x10112) [0x7fab4154b112] [ 184.102] 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPxPreInit+0x119) [0x7fab41d4e399] [ 184.102] 5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPreInit+0x2079) [0x7fab41d23829] [ 184.103] 6: X (InitOutput+0x834) [0x475f54] [ 184.103] 7: X (0x400000+0x27113) [0x427113] [ 184.103] 8: /lib64/libc.so.6 (__libc_start_main+0xed) [0x7fab4404823d] [ 184.103] 9: X (0x400000+0x275bd) [0x4275bd] [ 184.103] Segmentation fault at address (nil) [ 184.103]
Kann ich leider nichts zu sagen. Zum Vergleich sende ich mal meine Xorg.0.log (Achtung lang!) von meinem Tower PC: [ 28.535] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 28.535] X Protocol Version 11, Revision 0 [ 28.535] Build Operating System: openSUSE SUSE LINUX [ 28.536] Current Operating System: Linux TUX 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) x86_64 [ 28.536] Kernel command line: root=/dev/sda8 resume=/dev/sda5 vga=0x345 [ 28.536] Build Date: 10 November 2011 03:34:36PM [ 28.536] [ 28.536] Current version of pixman: 0.22.0 [ 28.536] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 28.536] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.536] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 11 18:39:11 2012 [ 28.688] (==) Using config file: "/etc/X11/xorg.conf" [ 28.688] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 28.688] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 28.806] (==) ServerLayout "aticonfig Layout" [ 28.806] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 28.806] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 28.806] (**) | |-->Device "aticonfig-Device[0]-0" [ 28.806] (==) Automatically adding devices [ 28.806] (==) Automatically enabling devices [ 29.203] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 29.203] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 29.203] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 29.203] (II) Loader magic: 0x7d9140 [ 29.203] (II) Module ABI versions: [ 29.203] X.Org ANSI C Emulation: 0.4 [ 29.203] X.Org Video Driver: 10.0 [ 29.203] X.Org XInput driver : 12.2 [ 29.203] X.Org Server Extension : 5.0 [ 29.203] (--) PCI:*(0:1:0:0) 1002:6739:1787:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xfd7c0000/131072, I/O @ 0x0000be00/256, BIOS @ 0x????????/131072 [ 29.204] (II) Open ACPI successful (/var/run/acpid.socket) [ 29.204] (II) "extmod" will be loaded by default. [ 29.204] (II) "dbe" will be loaded by default. [ 29.204] (II) "glx" will be loaded by default. [ 29.204] (II) "record" will be loaded by default. [ 29.204] (II) "dri" will be loaded by default. [ 29.204] (II) "dri2" will be loaded by default. [ 29.204] (II) LoadModule: "extmod" [ 29.275] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 29.283] (II) Module extmod: vendor="X.Org Foundation" [ 29.283] compiled for 1.10.4, module version = 1.0.0 [ 29.283] Module class: X.Org Server Extension [ 29.283] ABI class: X.Org Server Extension, version 5.0 [ 29.283] (II) Loading extension MIT-SCREEN-SAVER [ 29.283] (II) Loading extension XFree86-VidModeExtension [ 29.283] (II) Loading extension XFree86-DGA [ 29.283] (II) Loading extension DPMS [ 29.283] (II) Loading extension XVideo [ 29.283] (II) Loading extension XVideo-MotionCompensation [ 29.283] (II) Loading extension X-Resource [ 29.283] (II) LoadModule: "dbe" [ 29.283] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 29.286] (II) Module dbe: vendor="X.Org Foundation" [ 29.286] compiled for 1.10.4, module version = 1.0.0 [ 29.286] Module class: X.Org Server Extension [ 29.286] ABI class: X.Org Server Extension, version 5.0 [ 29.286] (II) Loading extension DOUBLE-BUFFER [ 29.286] (II) LoadModule: "glx" [ 29.286] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so [ 29.326] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 29.327] compiled for 6.9.0, module version = 1.0.0 [ 29.327] (II) Loading extension GLX [ 29.327] (II) LoadModule: "record" [ 29.327] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 29.327] (II) Module record: vendor="X.Org Foundation" [ 29.327] compiled for 1.10.4, module version = 1.13.0 [ 29.327] Module class: X.Org Server Extension [ 29.327] ABI class: X.Org Server Extension, version 5.0 [ 29.327] (II) Loading extension RECORD [ 29.327] (II) LoadModule: "dri" [ 29.328] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 29.354] (II) Module dri: vendor="X.Org Foundation" [ 29.354] compiled for 1.10.4, module version = 1.0.0 [ 29.354] ABI class: X.Org Server Extension, version 5.0 [ 29.354] (II) Loading extension XFree86-DRI [ 29.354] (II) LoadModule: "dri2" [ 29.355] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 29.355] (II) Module dri2: vendor="X.Org Foundation" [ 29.355] compiled for 1.10.4, module version = 1.2.0 [ 29.355] ABI class: X.Org Server Extension, version 5.0 [ 29.355] (II) Loading extension DRI2 [ 29.355] (II) LoadModule: "fglrx" [ 29.399] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 29.573] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 29.590] compiled for 1.4.99.906, module version = 8.92.6 [ 29.590] Module class: X.Org Video Driver [ 29.590] (II) Loading sub module "fglrxdrm" [ 29.590] (II) LoadModule: "fglrxdrm" [ 29.590] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 29.600] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 29.600] compiled for 1.4.99.906, module version = 8.92.6 [ 29.600] (II) ATI Proprietary Linux Driver Version Identifier:8.92.6 [ 29.600] (II) ATI Proprietary Linux Driver Release Identifier: 8.92 [ 29.600] (II) ATI Proprietary Linux Driver Build Date: Nov 9 2011 21:11:31 [ 29.600] (++) using VT number 7 [ 29.616] (WW) Falling back to old probe method for fglrx [ 29.723] (II) Loading PCS database from /etc/ati/amdpcsdb [ 29.761] (--) Chipset Supported AMD Graphics Processor (0x6739) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found [ 29.777] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 29.777] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 29.791] (II) AMD Video driver is signed [ 29.791] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 29.791] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 29.791] (II) fglrx(0): pEnt->device->identifier=0x80f0d0 [ 29.791] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin [ 29.792] (II) Loading sub module "vgahw" [ 29.792] (II) LoadModule: "vgahw" [ 29.793] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [ 29.803] (II) Module vgahw: vendor="X.Org Foundation" [ 29.803] compiled for 1.10.4, module version = 0.1.0 [ 29.803] ABI class: X.Org Video Driver, version 10.0 [ 29.803] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 29.803] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 29.803] (==) fglrx(0): Default visual is TrueColor [ 29.803] (**) fglrx(0): Option "DPMS" "true" [ 29.803] (==) fglrx(0): RGB weight 888 [ 29.803] (II) fglrx(0): Using 8 bits per RGB [ 29.803] (==) fglrx(0): Buffer Tiling is ON [ 29.804] (II) Loading sub module "fglrxdrm" [ 29.804] (II) LoadModule: "fglrxdrm" [ 29.804] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 29.804] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 29.804] compiled for 1.4.99.906, module version = 8.92.6 [ 29.809] ukiDynamicMajor: found major device number 251 [ 29.810] ukiDynamicMajor: found major device number 251 [ 29.810] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 29.810] ukiOpenDevice: node name is /dev/ati/card0 [ 29.810] ukiOpenDevice: open result is 11, (OK) [ 29.810] ukiOpenByBusid: ukiOpenMinor returns 11 [ 29.810] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 29.810] (==) fglrx(0): NoAccel = NO [ 29.810] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 29.810] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739) [ 29.810] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x0b00) [ 29.810] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 29.810] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 29.810] (--) fglrx(0): MMIO registers at 0xfd7c0000 [ 29.810] (--) fglrx(0): I/O port at 0x0000be00 [ 29.810] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 29.903] (II) fglrx(0): AC Adapter is used [ 29.925] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 29.926] (II) Loading sub module "vbe" [ 29.926] (II) LoadModule: "vbe" [ 29.926] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 29.927] (II) Module vbe: vendor="X.Org Foundation" [ 29.927] compiled for 1.10.4, module version = 1.1.0 [ 29.927] ABI class: X.Org Video Driver, version 10.0 [ 29.927] (II) fglrx(0): VESA BIOS detected [ 29.927] (II) fglrx(0): VbeVersion is 768, OemStringPtr is 0xc00001f4, OemVendorNamePtr is 0xc0000128, OemProductNamePtr is 0xc00000b9, OemProductRevPtr is 0xc0004c7a [ 29.927] (II) fglrx(0): VESA VBE Version 3.0 [ 29.927] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 29.927] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS [ 29.927] (II) fglrx(0): VESA VBE OEM Software Rev: 13.10 [ 29.927] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc. [ 29.927] (II) fglrx(0): VESA VBE OEM Product: BARTS [ 29.927] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 29.953] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 29.953] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5 [ 29.953] (II) fglrx(0): PCIE card detected [ 29.953] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 29.953] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 29.955] (II) fglrx(0): Using adapter: 1:0.0. [ 29.986] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) [ 29.998] (II) fglrx(0): Interrupt handler installed at IRQ 53. [ 29.998] (II) fglrx(0): RandR 1.2 support is enabled! [ 29.998] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 29.998] (==) fglrx(0): Center Mode is disabled [ 29.998] (II) Loading sub module "fb" [ 29.998] (II) LoadModule: "fb" [ 30.015] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 30.027] (II) Module fb: vendor="X.Org Foundation" [ 30.027] compiled for 1.10.4, module version = 1.0.0 [ 30.027] ABI class: X.Org ANSI C Emulation, version 0.4 [ 30.027] (II) Loading sub module "ddc" [ 30.027] (II) LoadModule: "ddc" [ 30.027] (II) Module "ddc" already built-in [ 30.266] (II) fglrx(0): Finished Initialize PPLIB! [ 30.280] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0 [ 30.280] (II) fglrx(0): Output DFP2 has no monitor section [ 30.280] (II) fglrx(0): Output DFP3 has no monitor section [ 30.280] (II) fglrx(0): Output DFP4 has no monitor section [ 30.280] (II) fglrx(0): Output CRT1 has no monitor section [ 30.292] (II) Loading sub module "ddc" [ 30.292] (II) LoadModule: "ddc" [ 30.292] (II) Module "ddc" already built-in [ 30.292] (II) fglrx(0): Connected Display0: DFP3 [ 30.292] (II) fglrx(0): Display0 EDID data --------------------------- [ 30.292] (II) fglrx(0): Manufacturer: SAM Model: 37c Serial#: 1095840306 [ 30.292] (II) fglrx(0): Year: 2008 Week: 33 [ 30.292] (II) fglrx(0): EDID Version: 1.3 [ 30.292] (II) fglrx(0): Digital Display Input [ 30.292] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 30.292] (II) fglrx(0): Gamma: 2.20 [ 30.292] (II) fglrx(0): DPMS capabilities: Off [ 30.292] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 30.292] (II) fglrx(0): First detailed timing is preferred mode [ 30.292] (II) fglrx(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605 [ 30.292] (II) fglrx(0): blueX: 0.151 blueY: 0.073 whiteX: 0.312 whiteY: 0.329 [ 30.292] (II) fglrx(0): Supported established timings: [ 30.292] (II) fglrx(0): 720x400@70Hz [ 30.292] (II) fglrx(0): 640x480@60Hz [ 30.292] (II) fglrx(0): 640x480@67Hz [ 30.292] (II) fglrx(0): 640x480@72Hz [ 30.292] (II) fglrx(0): 640x480@75Hz [ 30.292] (II) fglrx(0): 800x600@56Hz [ 30.292] (II) fglrx(0): 800x600@60Hz [ 30.292] (II) fglrx(0): 800x600@72Hz [ 30.292] (II) fglrx(0): 800x600@75Hz [ 30.292] (II) fglrx(0): 832x624@75Hz [ 30.292] (II) fglrx(0): 1024x768@60Hz [ 30.292] (II) fglrx(0): 1024x768@70Hz [ 30.292] (II) fglrx(0): 1024x768@75Hz [ 30.292] (II) fglrx(0): 1280x1024@75Hz [ 30.292] (II) fglrx(0): 1152x864@75Hz [ 30.292] (II) fglrx(0): Manufacturer's mask: 0 [ 30.292] (II) fglrx(0): Supported standard timings: [ 30.292] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 30.292] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 30.292] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 30.292] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 30.292] (II) fglrx(0): Supported detailed timing: [ 30.292] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm [ 30.292] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 [ 30.292] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 [ 30.292] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 30.292] (II) fglrx(0): Monitor name: SyncMaster [ 30.292] (II) fglrx(0): Serial No: H9XQ823801 [ 30.292] (II) fglrx(0): EDID (in hex): [ 30.292] (II) fglrx(0): 00ffffffffffff004c2d7c0332325141 [ 30.292] (II) fglrx(0): 21120103802f1e782a78f1a655489b26 [ 30.292] (II) fglrx(0): 125054bfef80b30081808140714f0101 [ 30.292] (II) fglrx(0): 0101010101017c2e90a0601a1e403020 [ 30.292] (II) fglrx(0): 3600da281100001a000000fd00384b1e [ 30.292] (II) fglrx(0): 510e000a202020202020000000fc0053 [ 30.292] (II) fglrx(0): 796e634d61737465720a2020000000ff [ 30.292] (II) fglrx(0): 00483958513832333830310a202000c0 [ 30.292] (II) fglrx(0): End of Display0 EDID data -------------------- [ 30.293] (II) fglrx(0): EDID for output DFP1 [ 30.293] (II) fglrx(0): EDID for output DFP2 [ 30.293] (II) fglrx(0): EDID for output DFP3 [ 30.293] (II) fglrx(0): Manufacturer: SAM Model: 37c Serial#: 1095840306 [ 30.293] (II) fglrx(0): Year: 2008 Week: 33 [ 30.293] (II) fglrx(0): EDID Version: 1.3 [ 30.293] (II) fglrx(0): Digital Display Input [ 30.293] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 30.293] (II) fglrx(0): Gamma: 2.20 [ 30.293] (II) fglrx(0): DPMS capabilities: Off [ 30.293] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 30.293] (II) fglrx(0): First detailed timing is preferred mode [ 30.293] (II) fglrx(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605 [ 30.293] (II) fglrx(0): blueX: 0.151 blueY: 0.073 whiteX: 0.312 whiteY: 0.329 [ 30.293] (II) fglrx(0): Supported established timings: [ 30.293] (II) fglrx(0): 720x400@70Hz [ 30.293] (II) fglrx(0): 640x480@60Hz [ 30.293] (II) fglrx(0): 640x480@67Hz [ 30.293] (II) fglrx(0): 640x480@72Hz [ 30.293] (II) fglrx(0): 640x480@75Hz [ 30.293] (II) fglrx(0): 800x600@56Hz [ 30.293] (II) fglrx(0): 800x600@60Hz [ 30.293] (II) fglrx(0): 800x600@72Hz [ 30.293] (II) fglrx(0): 800x600@75Hz [ 30.293] (II) fglrx(0): 832x624@75Hz [ 30.293] (II) fglrx(0): 1024x768@60Hz [ 30.293] (II) fglrx(0): 1024x768@70Hz [ 30.293] (II) fglrx(0): 1024x768@75Hz [ 30.293] (II) fglrx(0): 1280x1024@75Hz [ 30.293] (II) fglrx(0): 1152x864@75Hz [ 30.293] (II) fglrx(0): Manufacturer's mask: 0 [ 30.293] (II) fglrx(0): Supported standard timings: [ 30.293] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 30.293] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 30.293] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 30.293] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 30.293] (II) fglrx(0): Supported detailed timing: [ 30.293] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm [ 30.293] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 [ 30.293] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 [ 30.293] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 30.293] (II) fglrx(0): Monitor name: SyncMaster [ 30.293] (II) fglrx(0): Serial No: H9XQ823801 [ 30.293] (II) fglrx(0): EDID (in hex): [ 30.293] (II) fglrx(0): 00ffffffffffff004c2d7c0332325141 [ 30.293] (II) fglrx(0): 21120103802f1e782a78f1a655489b26 [ 30.293] (II) fglrx(0): 125054bfef80b30081808140714f0101 [ 30.293] (II) fglrx(0): 0101010101017c2e90a0601a1e403020 [ 30.293] (II) fglrx(0): 3600da281100001a000000fd00384b1e [ 30.293] (II) fglrx(0): 510e000a202020202020000000fc0053 [ 30.293] (II) fglrx(0): 796e634d61737465720a2020000000ff [ 30.293] (II) fglrx(0): 00483958513832333830310a202000c0 [ 30.293] (II) fglrx(0): Printing probed modes for output DFP3 [ 30.293] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1360x1024"x60.0 119.00 1360 1728 1760 1840 1024 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1152x864"x60.0 119.00 1152 1728 1760 1840 864 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.293] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 30.293] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 30.294] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 30.294] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 30.294] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 30.294] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 30.294] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 30.294] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 30.294] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz) [ 30.294] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz) [ 30.294] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 30.294] (II) fglrx(0): EDID for output DFP4 [ 30.294] (II) fglrx(0): EDID for output CRT1 [ 30.294] (II) fglrx(0): Output DFP1 disconnected [ 30.294] (II) fglrx(0): Output DFP2 disconnected [ 30.294] (II) fglrx(0): Output DFP3 connected [ 30.294] (II) fglrx(0): Output DFP4 disconnected [ 30.294] (II) fglrx(0): Output CRT1 disconnected [ 30.294] (II) fglrx(0): Using exact sizes for initial modes [ 30.294] (II) fglrx(0): Output DFP3 using initial mode 1680x1050 [ 30.294] (II) fglrx(0): DPI set to (96, 96) [ 30.294] (II) fglrx(0): Eyefinity capable adapter detected. [ 30.294] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected. [ 30.294] (==) fglrx(0): PseudoColor visuals disabled [ 30.294] (II) Loading sub module "ramdac" [ 30.294] (II) LoadModule: "ramdac" [ 30.294] (II) Module "ramdac" already built-in [ 30.294] (==) fglrx(0): NoDRI = NO [ 30.294] (==) fglrx(0): Capabilities: 0x00000000 [ 30.294] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 30.294] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 30.294] (==) fglrx(0): UseFastTLS=0 [ 30.294] (==) fglrx(0): BlockSignalsOnLock=1 [ 30.310] (II) fglrx(0): Desktop Vsync is enabled. [ 30.310] (--) Depth 24 pixmap format is 32 bpp [ 30.310] (II) Loading extension ATIFGLRXDRI [ 30.310] (II) fglrx(0): doing swlDriScreenInit [ 30.310] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 30.310] ukiDynamicMajor: found major device number 251 [ 30.310] ukiDynamicMajor: found major device number 251 [ 30.310] ukiDynamicMajor: found major device number 251 [ 30.310] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 30.310] ukiOpenDevice: node name is /dev/ati/card0 [ 30.310] ukiOpenDevice: open result is 13, (OK) [ 30.310] ukiOpenByBusid: ukiOpenMinor returns 13 [ 30.310] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 30.310] (II) fglrx(0): [uki] DRM interface version 1.0 [ 30.310] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 30.310] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 30.310] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f39209b5000 [ 30.310] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 30.310] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 30.310] (II) fglrx(0): swlDriScreenInit done [ 30.310] (II) fglrx(0): Kernel Module Version Information: [ 30.310] (II) fglrx(0): Name: fglrx [ 30.310] (II) fglrx(0): Version: 8.92.6 [ 30.310] (II) fglrx(0): Date: Nov 9 2011 [ 30.310] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 30.310] (II) fglrx(0): Kernel Module version matches driver. [ 30.310] (II) fglrx(0): Kernel Module Build Time Information: [ 30.310] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.1.0-1.2-desktop [ 30.310] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 30.310] (II) fglrx(0): Build-Kernel __SMP__: yes [ 30.310] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 30.310] (II) fglrx(0): [uki] register handle = 0x00004000 [ 30.334] (II) fglrx(0): DRI initialization successfull [ 30.334] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01008000 [ 30.367] (==) fglrx(0): Backing store disabled [ 30.367] (II) Loading extension FGLRXEXTENSION [ 30.367] (**) fglrx(0): DPMS enabled [ 30.368] (II) fglrx(0): Initialized in-driver Xinerama extension [ 30.368] (**) fglrx(0): Textured Video is enabled. [ 30.368] (II) LoadModule: "glesx" [ 30.381] (II) Loading /usr/lib64/xorg/modules/glesx.so [ 30.536] (II) Module glesx: vendor="X.Org Foundation" [ 30.536] compiled for 1.4.99.906, module version = 1.0.0 [ 30.536] (II) Loading extension GLESX [ 30.536] (II) fglrx(0): GLESX enableFlags = 592 [ 30.537] (II) fglrx(0): GLESX is enabled [ 30.537] (II) LoadModule: "amdxmm" [ 30.538] (II) Loading /usr/lib64/xorg/modules/amdxmm.so [ 30.550] (II) Module amdxmm: vendor="X.Org Foundation" [ 30.550] compiled for 1.4.99.906, module version = 2.0.0 [ 30.564] (II) Loading extension AMDXVOPL [ 30.564] (II) Loading extension AMDXVBA [ 30.564] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange [ 30.576] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 30.579] (II) fglrx(0): Enable composite support successfully [ 30.579] (WW) fglrx(0): Option "VendorName" is not used [ 30.579] (WW) fglrx(0): Option "ModelName" is not used [ 30.579] (II) fglrx(0): X context handle = 0x1 [ 30.579] (II) fglrx(0): [DRI] installation complete [ 30.580] (==) fglrx(0): Silken mouse enabled [ 30.580] (==) fglrx(0): Using HW cursor of display infrastructure! [ 30.581] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 30.634] (--) RandR disabled [ 30.634] (II) Initializing built-in extension Generic Event Extension [ 30.635] (II) Initializing built-in extension SHAPE [ 30.635] (II) Initializing built-in extension MIT-SHM [ 30.635] (II) Initializing built-in extension XInputExtension [ 30.635] (II) Initializing built-in extension XTEST [ 30.635] (II) Initializing built-in extension BIG-REQUESTS [ 30.635] (II) Initializing built-in extension SYNC [ 30.635] (II) Initializing built-in extension XKEYBOARD [ 30.635] (II) Initializing built-in extension XC-MISC [ 30.635] (II) Initializing built-in extension SECURITY [ 30.635] (II) Initializing built-in extension XINERAMA [ 30.635] (II) Initializing built-in extension XFIXES [ 30.635] (II) Initializing built-in extension RENDER [ 30.635] (II) Initializing built-in extension RANDR [ 30.635] (II) Initializing built-in extension COMPOSITE [ 30.635] (II) Initializing built-in extension DAMAGE [ 30.636] ukiDynamicMajor: found major device number 251 [ 30.636] ukiDynamicMajor: found major device number 251 [ 30.636] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 30.636] ukiOpenDevice: node name is /dev/ati/card0 [ 30.636] ukiOpenDevice: open result is 14, (OK) [ 30.636] ukiOpenByBusid: ukiOpenMinor returns 14 [ 30.636] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 31.427] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 31.513] (II) fglrx(0): Enable the clock gating! [ 31.517] (II) fglrx(0): Desktop Vsync is enabled. [ 31.517] (II) fglrx(0): Setting screen physical size to 444 x 277 [ 32.008] (II) XKB: Reusing cached keymap [ 32.017] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 32.017] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.017] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.017] (**) Power Button: Applying InputClass "LocalKeyboard" [ 32.017] (II) LoadModule: "evdev" [ 32.017] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.032] (II) Module evdev: vendor="X.Org Foundation" [ 32.032] compiled for 1.10.4, module version = 2.6.0 [ 32.032] Module class: X.Org XInput Driver [ 32.032] ABI class: X.Org XInput driver, version 12.2 [ 32.032] (II) Using input driver 'evdev' for 'Power Button' [ 32.032] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.032] Option "XkbRules" "evdev" [ 32.032] Option "XkbModel" "evdev" [ 32.032] Option "XkbLayout" "de" [ 32.032] Option "_source" "server/udev" [ 32.032] Option "name" "Power Button" [ 32.032] Option "path" "/dev/input/event3" [ 32.032] Option "device" "/dev/input/event3" [ 32.032] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 32.032] Option "driver" "evdev" [ 32.032] Option "XkbVariant" "nodeadkeys" [ 32.032] (**) Power Button: always reports core events [ 32.032] (**) Power Button: Device: "/dev/input/event3" [ 32.032] (--) Power Button: Found keys [ 32.032] (II) Power Button: Configuring as keyboard [ 32.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 32.032] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 32.032] (**) Option "xkb_rules" "evdev" [ 32.032] (**) Option "xkb_model" "evdev" [ 32.032] (**) Option "xkb_layout" "de" [ 32.032] (**) Option "xkb_variant" "nodeadkeys" [ 32.083] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 32.083] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.083] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 32.083] (**) Power Button: Applying InputClass "LocalKeyboard" [ 32.083] (II) Using input driver 'evdev' for 'Power Button' [ 32.083] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.083] Option "XkbRules" "evdev" [ 32.083] Option "XkbModel" "evdev" [ 32.083] Option "XkbLayout" "de" [ 32.083] Option "_source" "server/udev" [ 32.083] Option "name" "Power Button" [ 32.083] Option "path" "/dev/input/event2" [ 32.083] Option "device" "/dev/input/event2" [ 32.083] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 32.083] Option "driver" "evdev" [ 32.083] Option "XkbVariant" "nodeadkeys" [ 32.083] (**) Power Button: always reports core events [ 32.083] (**) Power Button: Device: "/dev/input/event2" [ 32.083] (--) Power Button: Found keys [ 32.083] (II) Power Button: Configuring as keyboard [ 32.083] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 32.083] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 32.083] (**) Option "xkb_rules" "evdev" [ 32.084] (**) Option "xkb_model" "evdev" [ 32.084] (**) Option "xkb_layout" "de" [ 32.084] (**) Option "xkb_variant" "nodeadkeys" [ 32.084] (II) XKB: Reusing cached keymap [ 32.087] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event1) [ 32.087] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 32.087] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 32.087] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' [ 32.087] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.087] Option "XkbRules" "evdev" [ 32.087] Option "XkbModel" "evdev" [ 32.087] Option "XkbLayout" "us" [ 32.087] Option "_source" "server/udev" [ 32.087] Option "name" "Logitech USB Laser Mouse" [ 32.087] Option "path" "/dev/input/event1" [ 32.087] Option "device" "/dev/input/event1" [ 32.087] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input1/event1" [ 32.087] Option "driver" "evdev" [ 32.087] (**) Logitech USB Laser Mouse: always reports core events [ 32.087] (**) Logitech USB Laser Mouse: Device: "/dev/input/event1" [ 32.087] (--) Logitech USB Laser Mouse: Found 12 mouse buttons [ 32.087] (--) Logitech USB Laser Mouse: Found scroll wheel(s) [ 32.087] (--) Logitech USB Laser Mouse: Found relative axes [ 32.087] (--) Logitech USB Laser Mouse: Found x and y relative axes [ 32.087] (II) Logitech USB Laser Mouse: Configuring as mouse [ 32.087] (II) Logitech USB Laser Mouse: Adding scrollwheel support [ 32.087] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 [ 32.087] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 32.087] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input1/event1" [ 32.087] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE) [ 32.087] (II) Logitech USB Laser Mouse: initialized for relative axes. [ 32.087] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 [ 32.087] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 [ 32.087] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 [ 32.087] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 [ 32.088] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0) [ 32.088] (II) No input driver/identifier specified (ignoring) [ 32.090] (II) config/udev: Adding input device DVB on-card IR receiver (/dev/input/event5) [ 32.090] (**) DVB on-card IR receiver: Applying InputClass "evdev keyboard catchall" [ 32.090] (**) DVB on-card IR receiver: Applying InputClass "evdev keyboard catchall" [ 32.090] (**) DVB on-card IR receiver: Applying InputClass "LocalKeyboard" [ 32.090] (II) Using input driver 'evdev' for 'DVB on-card IR receiver' [ 32.090] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.090] Option "XkbRules" "evdev" [ 32.090] Option "XkbModel" "evdev" [ 32.090] Option "XkbLayout" "de" [ 32.090] Option "_source" "server/udev" [ 32.090] Option "name" "DVB on-card IR receiver" [ 32.090] Option "path" "/dev/input/event5" [ 32.090] Option "device" "/dev/input/event5" [ 32.090] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.4/0000:05:07.0/input/input5/event5" [ 32.090] Option "driver" "evdev" [ 32.090] Option "XkbVariant" "nodeadkeys" [ 32.090] (**) DVB on-card IR receiver: always reports core events [ 32.090] (**) DVB on-card IR receiver: Device: "/dev/input/event5" [ 32.090] (--) DVB on-card IR receiver: Found keys [ 32.090] (II) DVB on-card IR receiver: Configuring as keyboard [ 32.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.4/0000:05:07.0/input/input5/event5" [ 32.090] (II) XINPUT: Adding extended input device "DVB on-card IR receiver" (type: KEYBOARD) [ 32.090] (**) Option "xkb_rules" "evdev" [ 32.090] (**) Option "xkb_model" "evdev" [ 32.090] (**) Option "xkb_layout" "de" [ 32.090] (**) Option "xkb_variant" "nodeadkeys" [ 32.090] (II) XKB: Reusing cached keymap [ 32.091] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 32.091] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 32.091] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 32.091] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" [ 32.091] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 32.091] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 32.091] Option "XkbRules" "evdev" [ 32.091] Option "XkbModel" "evdev" [ 32.091] Option "XkbLayout" "de" [ 32.091] Option "_source" "server/udev" [ 32.091] Option "name" "AT Translated Set 2 keyboard" [ 32.091] Option "path" "/dev/input/event0" [ 32.091] Option "device" "/dev/input/event0" [ 32.091] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 32.091] Option "driver" "evdev" [ 32.091] Option "XkbVariant" "nodeadkeys" [ 32.091] (**) AT Translated Set 2 keyboard: always reports core events [ 32.091] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 32.091] (--) AT Translated Set 2 keyboard: Found keys [ 32.091] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 32.091] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 32.091] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 32.091] (**) Option "xkb_rules" "evdev" [ 32.091] (**) Option "xkb_model" "evdev" [ 32.091] (**) Option "xkb_layout" "de" [ 32.091] (**) Option "xkb_variant" "nodeadkeys" [ 32.091] (II) XKB: Reusing cached keymap [ 32.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 32.091] (II) No input driver/identifier specified (ignoring) [ 32.096] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 32.110] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 32.110] (II) fglrx(0): Using EDID range info for horizontal sync [ 32.111] (II) fglrx(0): Using EDID range info for vertical refresh [ 32.111] (II) fglrx(0): Printing DDC gathered Modelines: [ 32.111] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 32.111] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 32.111] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 32.111] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 32.111] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 32.111] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 32.111] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 32.111] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 32.111] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 32.111] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 32.111] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 32.111] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 32.111] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 32.111] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 32.111] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 32.111] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 32.111] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 32.111] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 38.167] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 38.167] (II) fglrx(0): Using hsync ranges from config file [ 38.167] (II) fglrx(0): Using vrefresh ranges from config file [ 38.167] (II) fglrx(0): Printing DDC gathered Modelines: [ 38.167] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 38.167] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 38.167] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 38.167] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 38.167] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 38.168] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 38.168] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 38.168] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 38.168] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 38.168] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 38.168] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 38.168] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 38.168] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 38.168] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 38.168] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 38.168] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 38.168] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 38.168] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 39.464] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 39.464] (II) fglrx(0): Using hsync ranges from config file [ 39.464] (II) fglrx(0): Using vrefresh ranges from config file [ 39.464] (II) fglrx(0): Printing DDC gathered Modelines: [ 39.464] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 39.464] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 39.465] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 39.465] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 39.465] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 39.465] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 39.465] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 39.465] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 39.465] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 39.465] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 39.465] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 39.465] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 39.465] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 39.465] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 39.465] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 39.465] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 39.465] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 39.465] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 39.480] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 39.480] (II) fglrx(0): Using hsync ranges from config file [ 39.480] (II) fglrx(0): Using vrefresh ranges from config file [ 39.480] (II) fglrx(0): Printing DDC gathered Modelines: [ 39.480] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 39.480] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 39.480] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 39.480] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 39.480] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 39.480] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 39.480] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 39.480] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 39.480] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 39.480] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 39.480] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 39.480] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 39.480] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 39.480] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 39.480] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 39.480] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 39.480] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 39.480] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 39.512] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 39.512] (II) fglrx(0): Using hsync ranges from config file [ 39.512] (II) fglrx(0): Using vrefresh ranges from config file [ 39.512] (II) fglrx(0): Printing DDC gathered Modelines: [ 39.512] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 39.512] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 39.512] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 39.512] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 39.512] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 39.512] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 39.512] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 39.512] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 39.512] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 39.512] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 39.512] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 39.512] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 39.512] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 39.512] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 39.512] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 39.512] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 39.513] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 39.513] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 39.525] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 39.525] (II) fglrx(0): Using hsync ranges from config file [ 39.525] (II) fglrx(0): Using vrefresh ranges from config file [ 39.525] (II) fglrx(0): Printing DDC gathered Modelines: [ 39.525] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 39.525] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 39.525] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 39.525] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 39.525] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 39.525] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 39.525] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 39.525] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 39.525] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 39.525] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 39.525] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 39.525] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 39.525] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 39.525] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 39.525] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 39.525] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 39.525] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 39.525] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 77.131] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 77.131] (II) fglrx(0): Using hsync ranges from config file [ 77.131] (II) fglrx(0): Using vrefresh ranges from config file [ 77.131] (II) fglrx(0): Printing DDC gathered Modelines: [ 77.131] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 77.131] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 77.131] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 77.131] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 77.131] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 77.132] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 77.132] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 77.132] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 77.132] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 77.132] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 77.132] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 77.132] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 77.132] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 77.132] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 77.132] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 77.132] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 77.132] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 77.132] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 77.142] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 77.142] (II) fglrx(0): Using hsync ranges from config file [ 77.142] (II) fglrx(0): Using vrefresh ranges from config file [ 77.142] (II) fglrx(0): Printing DDC gathered Modelines: [ 77.142] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 77.142] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 77.142] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 77.142] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 77.142] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 77.142] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 77.142] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 77.142] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 77.142] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 77.142] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 77.142] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 77.142] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 77.142] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 77.142] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 77.142] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 77.142] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 77.142] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 77.142] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 90.237] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 90.237] (II) fglrx(0): Using hsync ranges from config file [ 90.237] (II) fglrx(0): Using vrefresh ranges from config file [ 90.237] (II) fglrx(0): Printing DDC gathered Modelines: [ 90.237] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 90.237] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 90.237] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 90.237] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 90.237] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 90.237] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 90.237] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 90.237] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 90.237] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 90.237] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 90.237] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 90.237] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 90.237] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 90.237] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 90.237] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 90.237] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 90.237] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 90.237] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 90.718] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 90.719] (II) fglrx(0): Using hsync ranges from config file [ 90.719] (II) fglrx(0): Using vrefresh ranges from config file [ 90.719] (II) fglrx(0): Printing DDC gathered Modelines: [ 90.719] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 90.719] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 90.719] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 90.719] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 90.719] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 90.719] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 90.719] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 90.719] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 90.719] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 90.719] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 90.719] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 90.719] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 90.719] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 90.719] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 90.719] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 90.719] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 90.719] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 90.719] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 90.747] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 90.747] (II) fglrx(0): Using hsync ranges from config file [ 90.747] (II) fglrx(0): Using vrefresh ranges from config file [ 90.747] (II) fglrx(0): Printing DDC gathered Modelines: [ 90.747] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 90.747] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 90.747] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 90.747] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 90.747] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 90.747] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 90.747] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 90.747] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 90.747] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 90.747] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 90.747] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 90.747] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 90.747] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 90.747] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 90.747] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 90.747] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 90.747] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 90.747] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 90.756] (II) fglrx(0): EDID vendor "SAM", prod id 892 [ 90.756] (II) fglrx(0): Using hsync ranges from config file [ 90.756] (II) fglrx(0): Using vrefresh ranges from config file [ 90.756] (II) fglrx(0): Printing DDC gathered Modelines: [ 90.756] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 90.756] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 90.756] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 90.756] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 90.756] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 90.756] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 90.756] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 90.756] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 90.756] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 90.756] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 90.756] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 90.756] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 90.756] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 90.756] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 90.756] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 90.756] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 90.756] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 90.756] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) -- MfG Richi PS: Auf PMs wird von mir nicht reagiert. -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 11.01.2012 19:24, schrieb "Jörg Kühne": [...]
Switch to AMD
[ 184.100] drmOpenDevice: node name is /dev/dri/card0 [ 184.100] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.101] drmOpenDevice: node name is /dev/dri/card0 [ 184.101] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: drmOpenMinor returns 10 [ 184.101] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.101] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 184.101] (==) fglrx(0): RGB weight 888 [ 184.101] (==) fglrx(0): Default visual is TrueColor [ 184.101] (**) fglrx(0): Option "Tiling" "off" [ 184.101] (**) fglrx(0): Option "LinearFramebuffer" "on" [ 184.101] (**) fglrx(0): Option "Shadow" "off" [ 184.101] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) [ 184.101] (**) fglrx(0): ChipID override: 0x0116 [ 184.101] (**) fglrx(0): ChipRev override: 9 [ 184.101] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2)" [ 184.101] Backtrace: [ 184.101] 0: X (xorg_backtrace+0x26) [0x462396] [ 184.102] 1: X (0x400000+0x66919) [0x466919] [ 184.102] 2: /lib64/libpthread.so.0 (0x7fab450d1000+0xfd00) [0x7fab450e0d00] [ 184.102] 3: /usr/lib64/xorg/modules/drivers/intel_drv.so (0x7fab4153b000+0x10112) [0x7fab4154b112] [ 184.102] 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPxPreInit+0x119) [0x7fab41d4e399] [ 184.102] 5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPreInit+0x2079) [0x7fab41d23829] [ 184.103] 6: X (InitOutput+0x834) [0x475f54] [ 184.103] 7: X (0x400000+0x27113) [0x427113] [ 184.103] 8: /lib64/libc.so.6 (__libc_start_main+0xed) [0x7fab4404823d] [ 184.103] 9: X (0x400000+0x275bd) [0x4275bd] [ 184.103] Segmentation fault at address (nil) [ 184.103]
Vielen Dank für die Hilfe [...]
Hallo Jörg, das Problem ist bei AMD bekannt und hat auch kräftige Schelte von mir bekommen. AMD hat es aber leider geschafft, bei Notebooks mit dem PowerXpress-Feature den Treiber kaputt zu bekommen. Ich bin eingeschriebener Beta-Tester und auch offizieller Packaging Skript Maintainer vom AMD-Linux-Treiber für openSUSE. Jedoch habe ich leider kein Notebook mit der PowerXpress-Technologie, um den Treiber darauf zu testen, sonst hätte AMD viel eher einen Nackenschlag von mir erhalten. Mit AMD Catalyst 12.1 (fglrx 8.93) im Januar sollte das Problem behoben sein. Laut der Aussage vom AMD-Entwickler. -- Gruß Sebastian - openSUSE Member (Freespacer) Webseite/Blog: http://www.sebastian-siebert.de Wichtiger Hinweis zur openSUSE Mailing Liste: http://de.opensuse.org/openSUSE:Mailinglisten_Netiquette -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hallo Sebastian Vielen Dank für die AMD-News. Freundlichste Grüsse Jörg -------- Original-Nachricht --------
Datum: Wed, 11 Jan 2012 20:54:42 +0100 Von: Sebastian Siebert
An: opensuse-de@opensuse.org Betreff: Re: opensuse 12.1 (64-bit): Problem mit ati (Fglrx) Grafik-Treiber
Am 11.01.2012 19:24, schrieb "Jörg Kühne": [...]
Switch to AMD
[ 184.100] drmOpenDevice: node name is /dev/dri/card0 [ 184.100] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.101] drmOpenDevice: node name is /dev/dri/card0 [ 184.101] drmOpenDevice: open result is 10, (OK) [ 184.101] drmOpenByBusid: drmOpenMinor returns 10 [ 184.101] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.101] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 184.101] (==) fglrx(0): RGB weight 888 [ 184.101] (==) fglrx(0): Default visual is TrueColor [ 184.101] (**) fglrx(0): Option "Tiling" "off" [ 184.101] (**) fglrx(0): Option "LinearFramebuffer" "on" [ 184.101] (**) fglrx(0): Option "Shadow" "off" [ 184.101] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) [ 184.101] (**) fglrx(0): ChipID override: 0x0116 [ 184.101] (**) fglrx(0): ChipRev override: 9 [ 184.101] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2)" [ 184.101] Backtrace: [ 184.101] 0: X (xorg_backtrace+0x26) [0x462396] [ 184.102] 1: X (0x400000+0x66919) [0x466919] [ 184.102] 2: /lib64/libpthread.so.0 (0x7fab450d1000+0xfd00) [0x7fab450e0d00] [ 184.102] 3: /usr/lib64/xorg/modules/drivers/intel_drv.so (0x7fab4153b000+0x10112) [0x7fab4154b112] [ 184.102] 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPxPreInit+0x119) [0x7fab41d4e399] [ 184.102] 5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_atiddxPreInit+0x2079) [0x7fab41d23829] [ 184.103] 6: X (InitOutput+0x834) [0x475f54] [ 184.103] 7: X (0x400000+0x27113) [0x427113] [ 184.103] 8: /lib64/libc.so.6 (__libc_start_main+0xed) [0x7fab4404823d] [ 184.103] 9: X (0x400000+0x275bd) [0x4275bd] [ 184.103] Segmentation fault at address (nil) [ 184.103]
Vielen Dank für die Hilfe [...]
Hallo Jörg,
das Problem ist bei AMD bekannt und hat auch kräftige Schelte von mir bekommen. AMD hat es aber leider geschafft, bei Notebooks mit dem PowerXpress-Feature den Treiber kaputt zu bekommen. Ich bin eingeschriebener Beta-Tester und auch offizieller Packaging Skript Maintainer vom AMD-Linux-Treiber für openSUSE. Jedoch habe ich leider kein Notebook mit der PowerXpress-Technologie, um den Treiber darauf zu testen, sonst hätte AMD viel eher einen Nackenschlag von mir erhalten. Mit AMD Catalyst 12.1 (fglrx 8.93) im Januar sollte das Problem behoben sein. Laut der Aussage vom AMD-Entwickler.
-- Gruß Sebastian - openSUSE Member (Freespacer) Webseite/Blog: http://www.sebastian-siebert.de Wichtiger Hinweis zur openSUSE Mailing Liste: http://de.opensuse.org/openSUSE:Mailinglisten_Netiquette -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
-- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
participants (4)
-
"Jörg Kühne"
-
Richard Kraut
-
Roman Fietze
-
Sebastian Siebert