Hallo! Ich krieg meine Funk-USB-Maus (von Lidl), Marke: Typhoon, nicht zum Laufen. Die Maus kann mit der Ladestation Kontakt aufnehmen (Kontrolllampe "flackert", wenn ich die Maus bewege). Momentan habe ich eine Logitech USB-Maus (mit Kabel) am Rechner. Wenn ich im laufenden Betrieb die Funkmaus, zusätzlich zur Logitech, dranhänge, dann kann ich die Funkmaus nicht verwenden. Ein Ausstöpseln der Logitech bringt auch keinen Erfolg. usbview bringt mir zur Funkmaus folgende Daten: mouse Speed: 1.5Mb/s (low) USB Version:  1.10 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 05fe Product Id: 0011 Revision Number:  1.01 Config Number: 1         Number of Interfaces: 1         Attributes: a0         MaxPower Needed: 100mA         Interface Number: 0                 Name: hid                 Alternate Number: 0                 Class: 03(HID  )                 Sub Class: 1                 Protocol: 2                 Number of Endpoints: 1                         Endpoint Address: 81                         Direction: in                         Attribute: 3                         Type: Int.                         Max Packet Size: 4                         Interval: 10ms Zur Logitech sagt usbview folgendes: USB Mouse Manufacturer: Logitech Speed: 1.5Mb/s (low) USB Version:  1.10 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 046d Product Id: c00c Revision Number:  6.20 Config Number: 1         Number of Interfaces: 1         Attributes: a0         MaxPower Needed: 100mA         Interface Number: 0                 Name: hid                 Alternate Number: 0                 Class: 03(HID  )                 Sub Class: 1                 Protocol: 2                 Number of Endpoints: 1                         Endpoint Address: 81                         Direction: in                         Attribute: 3                         Type: Int.                         Max Packet Size: 4                         Interval: 10ms Die Logitech hängt direkt am Rechner und die Funkmaus ist über einen Hub am Rechner. Zur Logitech steht folgendes in der /etc/X11/XF86config: Section "InputDevice"   Driver       "mouse"   Identifier   "Mouse[1]"   Option       "AutoSoft" "on"   Option       "Device" "/dev/mouse"   Option       "Emulate3Buttons" "on"   Option       "Name" "Autodetection"   Option       "Protocol" "Auto"   Option       "Vendor" "Sysp"   Option       "ZAxisMapping" "4 5" EndSection Zur Funkmaus steht folgendes drinnen: Section "InputDevice"   Driver       "mouse"   Identifier   "Mouse[3]"   Option       "Device" "/dev/mouse"   Option       "Emulate3Buttons" "on"   Option       "InputFashion" "Mouse"   Option       "Name" "USB-Mouse;IMPS/2"   Option       "Protocol" "imps/2"   Option       "ZAxisMapping" "4 5" EndSection Zusätzlich steht noch folgendes in der /etc/X11/XF86config: Section "ServerLayout"   Identifier   "Layout[all]"   InputDevice  "Keyboard[0]" "CoreKeyboard"   InputDevice  "Mouse[1]" "CorePointer"   InputDevice  "Mouse[3]" "CorePointer"   Option       "Clone" "off"   Option       "Xinerama" "off"   Screen       "Screen[0]" EndSection Wenn ich die Funkmaus im laufenden Betrieb einstecke, erhalte ich folgende Meldungen in der /var/log/messages: Mar 28 03:00:45 linux0 kernel: hub.c: new USB device 00:13.1-1.2, assigned address 5 Mar 28 03:00:46 linux0 kernel: usb-uhci.c: interrupt, status 2, frame# 273 Mar 28 03:00:46 linux0 kernel: SuSE-FW-DROP-NEW-CONNECT IN=ppp0 OUT= MAC= SRC=213.54.217.215 DST=213.54.211.233 LEN=48 TOS=0x00 PREC=0x00 TTL=126 ID=12798 DF PROTO=TCP SPT=3454 DPT=135 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (0204058801010402) Mar 28 03:00:51 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:51 linux0 kernel: input: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb2:5.0 Mar 28 03:00:52 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:52 linux0 kernel: hub.c: usb_hub_port_status (2) failed (err = -110) Mar 28 03:00:53 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:53 linux0 kernel: hub.c: usb_hub_port_status (2) failed (err = -110) Mar 28 03:00:54 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:54 linux0 kernel: hub.c: get_hub_status failed Mar 28 03:00:54 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:54 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:00:54 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:54 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:00:54 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:54 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:00:54 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:00:54 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 *schnipp* Mar 28 03:01:29 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:01:29 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:01:29 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:01:29 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:01:29 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:01:29 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:01:29 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:01:29 linux0 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 18 ret -110 Mar 28 03:01:29 linux0 /etc/hotplug/usb.agent[3924]: cannot get config descriptor: Connection timed out Mar 28 03:01:31 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:01:41 linux0 last message repeated 2 times Mar 28 03:01:45 linux0 kernel: SuSE-FW-DROP-NEW-CONNECT IN=ppp0 OUT= MAC= SRC=213.39.183.47 DST=213.54.211.233 LEN=60 TOS=0x00 PREC=0x00 TTL=53 ID=34212 DF PROTO=TCP SPT=57758 DPT=8020 WINDOW=32768 RES=0x00 SYN URGP=0 OPT (02040588010303000101080A7A98FCDD00000000) Mar 28 03:01:46 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:02:16 linux0 last message repeated 6 times Mar 28 03:02:21 linux0 kernel: usb_control/bulk_msg: timeout Mar 28 03:02:25 linux0 kernel: SuSE-FW-DROP-NEW-CONNECT IN=ppp0 OUT= MAC= SRC=63.138.105.20 DST=213.54.211.233 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=2256 DF PROTO=TCP SPT=64823 DPT=1124 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (02040588010303000101080AABB4036000000000) Mar 28 03:02:26 linux0 kernel: usb_control/bulk_msg: timeout Wo kann denn jetzt der Fehler liegen? Ich hab SuSE 9.0prof mit SuSE-Kernel und aktuellen YOU-Updates Gruß, Jürgen